The maximum value for rate in the Source engine is 1048576.
30000 seems to be a good maximum to use for L4D, though.
-Richard Eid
On Sun, Jun 7, 2009 at 1:14 PM, ics <[email protected]> wrote:
> By entering the cvar, you would know that the default value is 0
> (anything between 0-30000), max is 30000.
>
> -ics
>
> Guy Watkins kirjoitti:
> > I was asking the value, not the definition!
> > If it is too low you will get choke. But the server control this.
> >
> > } -----Original Message-----
> > } From: [email protected] [mailto:hlds_linux-
> > } [email protected]] On Behalf Of ics
> > } Sent: Sunday, June 07, 2009 1:02 PM
> > } To: Half-Life dedicated Linux server mailing list
> > } Subject: Re: [hlds_linux] L4D actual tickrate
> > }
> > } Max bandwidth rate allowed on server, 0 == unlimited
> > }
> > } Next time, just type the cvar into server console without the value to
> > } see that information.
> > }
> > } -ics
> > }
> > } Guy Watkins kirjoitti:
> > } > What is the value of:
> > } > sv_maxrate
> > } >
> > } > } -----Original Message-----
> > } > } From: [email protected] [mailto:
> hlds_linux-
> > } > } [email protected]] On Behalf Of Adam Nowacki
> > } > } Sent: Sunday, June 07, 2009 10:12 AM
> > } > } To: Half-Life dedicated Linux server mailing list
> > } > } Subject: Re: [hlds_linux] L4D actual tickrate
> > } > }
> > } > } choke = number of updates that were delayed due to rate limit
> > } > } if you see choke then rate setting is too low
> > } > }
> > } > } Nikolay Shopik wrote:
> > } > } > I'm running at 20000 rate and actually can handle 30000, have 8
> Mbit
> > } > } > link. There no loss at all, thats why I'm surprised to see choke.
> > } And
> > } > } > from net_graph I see rate not getting even close to 20Kbit/s
> (12-14
> > } max)
> > } > } > from server, so changing to 30000 not really do anything. My
> server
> > } > } > connected to fiber optic and have ping under 5ms.
> > } > } >
> > } > } > On 07.06.2009 1:47, Richard Eid wrote:
> > } > } >> If you are getting choke, raise 'rate' client-side. The default
> > } values
> > } > } in
> > } > } >> Left 4 Dead will provide for a little bit of choke, but nothing
> > } that
> > } > } can't
> > } > } >> be fixed by upping 'rate'. 20000 should be good enough, but
> > } there's
> > } > } nothing
> > } > } >> wrong with going higher if you have a connection to handle it.
> > } > }
> > } > }
> > } > } _______________________________________________
> > } > } To unsubscribe, edit your list preferences, or view the list
> archives,
> > } > } please visit:
> > } > } http://list.valvesoftware.com/mailman/listinfo/hlds_linux
> > } >
> > } >
> > } > _______________________________________________
> > } > To unsubscribe, edit your list preferences, or view the list
> archives,
> > } please visit:
> > } > http://list.valvesoftware.com/mailman/listinfo/hlds_linux
> > } >
> > }
> > }
> > } _______________________________________________
> > } To unsubscribe, edit your list preferences, or view the list archives,
> > } please visit:
> > } http://list.valvesoftware.com/mailman/listinfo/hlds_linux
> >
> >
> > _______________________________________________
> > To unsubscribe, edit your list preferences, or view the list archives,
> please visit:
> > http://list.valvesoftware.com/mailman/listinfo/hlds_linux
> >
>
>
> _______________________________________________
> To unsubscribe, edit your list preferences, or view the list archives,
> please visit:
> http://list.valvesoftware.com/mailman/listinfo/hlds_linux
>
_______________________________________________
To unsubscribe, edit your list preferences, or view the list archives, please
visit:
http://list.valvesoftware.com/mailman/listinfo/hlds_linux
