Hi folks, I wonder if anyone has seen something like what I've posted below. I was printing B/W from my DJ30 (Mac 10.4.9) on a 13 x 19" sheet of HPPP Satin. After some time, it appears as if the black just stops getting put down, and I get a red section of print. Then more black. Then it stops again.
A link to the photo is here: www.kofronphotography.com/dj30.jpg It's not consistant in terms of where it happens (so it's not something strange with the file). I cycled the power on both printer and computer, tried a couple different applications for printing, did the cycle of print head cleanings (soft, med, hard), took the cartridge out and reseated, took the printhead out and cleaned contacts. Nothing seems to have much of an effect. I've cranked out several bad letter size prints of this as well (on HP Photo Glossy stock---cause it's cheap...) Printhead is relatively new---I had replaced the black a while back because I was seeing some banding, but I'm now wondering if that was a sign of something more serious. The black cartridge has also been replaced within the last couple months. I'd be grateful for any ideas. Thanks! Jim Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
