Hi Jim, The only thing I could think of is that perhaps you have a 
bad printhead or PRINTHEADS. 
Its typically best to change them all at the same time.
Im not sure if your doing that.

Is your printhead calibration test giving you the Old Checkmark? 

How long ago did you start having this problem?
IF the problem occured after the new Printhead was installed then 
its Pretty likely.

Based of the info you gave thats my best guess.

Best Regards,

Justin




--- In [email protected], "htsscientist" 
<[EMAIL PROTECTED]> wrote:
>
> Hi folks,
> 
> I wonder if anyone has seen something like what I've posted below. 
I
> was printing B/W from my DJ30 (Mac 10.4.9) on a 13 x 19" sheet of 
HPPP
> Satin. After some time, it appears as if the black just stops 
getting
> put down, and I get a red section of print. Then more black. Then 
it
> stops again.
> 
> A link to the photo is here: 
> www.kofronphotography.com/dj30.jpg
> 
> It's not consistant in terms of where it happens (so it's not
> something strange with the file). I cycled the power on both 
printer
> and computer, tried a couple different applications for printing, 
did
> the cycle of print head cleanings (soft, med, hard), took the
> cartridge out and reseated, took the printhead out and cleaned
> contacts. Nothing seems to have much of an effect. I've cranked out
> several bad letter size prints of this as well (on HP Photo Glossy
> stock---cause it's cheap...)
> 
> Printhead is relatively new---I had replaced the black a while back
> because I was seeing some banding, but I'm now wondering if that 
was a
> sign of something more serious. The black cartridge has also been
> replaced within the last couple months.
> 
> I'd be grateful for any ideas. Thanks!
> 
> Jim
>




Website: http://groups.yahoo.com/group/HPDesignJet_Printers
Post message: [email protected] 
Subscribe: [EMAIL PROTECTED] 
Unsubscribe:  [EMAIL PROTECTED] 
List owner:  [EMAIL PROTECTED] 
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/HPDesignJet_Printers/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/HPDesignJet_Printers/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to