That's a bummer . HP Premium Plus Photo Satin weighs 286 gsm. The paper Eldon's describing is lighter. Its must be something other than the weight . HP PPPS is 11.5 mils thick . maybe it's the thickness.
- B. Gree, -------------------- That weight paper (especially cotton) is just on the limit of what my DJ 130 would cut with a nice new cutter. As they dull, the performance drops off. As far as I could tell, HP sells only the cutter assembly, not just the blade. I took a good look at the idea of trying to remove, sharpen, and replace the blade, but it didn't look feasible so I just bought a replacement. Time to go shopping or switch to a lighter paper. Bob --- In HPDesignJet_ <mailto:HPDesignJet_Printers%40yahoogroups.com> [EMAIL PROTECTED], Eldon Benz <[EMAIL PROTECTED]> wrote: > > I have a DJ 130 and just put an automatic roll feed and cutter on it. > I bought it used. > My problem is the cutter wont cut my Hawk Mountain Osprey Textured 24 > paper. 100% cotton, mould-made, acid-free 250 gsm, 15 mil > It starts to cut but then jams. I can slide the cutter through the > paper by hand but then the printer is in paper jam mode. I haven't > quite figured out how to easily recover from that without turning off > the printer and starting over. > > So is the cutter just dull from the supposed light use of the > previous owner or is it just not capable of cutting paper this heavy? > > And if just dull can I get new blades without buying the whole cutter > assembly? > > Thanks > > Eldon >
