http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00044783
Pay attention to get the color sections to match. Sometimes with an ink delivery failure, yellow is typical for the 130, you won't see banding but if you don't understand the color layout you will think its ok because it does not give any XXXs or other error indications. You have to know how to interp. the right color output. --- In [email protected], Bob Wise <[EMAIL PROTECTED]> wrote: > > Can you give some guidance on what a correct diagnostic looks like? > I agree this is a tricky issue. My main technique is to look for banding > in the top pattern... I don't know what to look for in the lower panels. > > -Bob > > jgury wrote: > > > > The #1 thing on the 130 to check first and foremost is the print > > diagnostic page. Make sure you understand what a correct diagnostic > > looks like because it is not obvious. I have gone thru plenty of > > problems where the calibration will go without problems and I thought > > that meant all is well then wasted a print without closely checking > > the diagnostic pattern. > > > > > ------------------------------------ Website: http://groups.yahoo.com/group/HPDesignJet_Printers Post message: [email protected] Subscribe: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] List owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/HPDesignJet_Printers/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/HPDesignJet_Printers/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
