well, this is what I found so far... on the diagnostic sheet everything is fine. What I have been trying to do now is to focus on the settings from photoshop (still not working from my pc yet). I did have my suspicions on the printheads, but the diagnostic sheet is fine. I will check the printheads though and see what happens.
--- El jue 27-nov-08, jgury <[EMAIL PROTECTED]> escribió: De:: jgury <[EMAIL PROTECTED]> Asunto: [HPDesignJet_Printers] Re: designjet 130 nr printing everything purple A: [email protected] Fecha: jueves, 27 noviembre, 2008, 4:59 pm http://h20000. www2.hp.com/ bizsupport/ TechSupport/ Document. jsp?lang= en&cc=us& objectID= c00044783 Pay attention to get the color sections to match. Sometimes with an ink delivery failure, yellow is typical for the 130, you won't see banding but if you don't understand the color layout you will think its ok because it does not give any XXXs or other error indications. You have to know how to interp. the right color output. --- In HPDesignJet_ Printers@ yahoogroups. com, Bob Wise <[EMAIL PROTECTED]> wrote: > > Can you give some guidance on what a correct diagnostic looks like? > I agree this is a tricky issue. My main technique is to look for banding > in the top pattern... I don't know what to look for in the lower panels. > > -Bob > > jgury wrote: > > > > The #1 thing on the 130 to check first and foremost is the print > > diagnostic page. Make sure you understand what a correct diagnostic > > looks like because it is not obvious. I have gone thru plenty of > > problems where the calibration will go without problems and I thought > > that meant all is well then wasted a print without closely checking > > the diagnostic pattern. > > > > > ¡Todo sobre Amor y Sexo! La guía completa para tu vida en Mujer de Hoy. http://mx.mujer.yahoo.com/
