Has any progress been made on this? thanks
Dan Phillips Dan Phillips wrote: > Hi Dave, > > > Thanks for replying. > > Here is some more information. I have included system and messages logs > > ECP is enabled in the BIOS > > I am not sure how to check how to check Software ECP is available, but I > can confirm the modules are loaded as below. > > dan[~]$ lsmod |grep parport > parport_pc 37796 2 > parport 39496 3 ppdev,lp,parport_pc > dan[~]$ lsmod |grep ppdev > ppdev 10500 2 > parport 39496 3 ppdev,lp,parport_pc > > > /var/log/system on Ubuntu 6.10 > 20:47:39 Start > 20:48:55 Press "Scan" > Immediately CPU 100% > At the end I left it running for 20 minutes, the messages repeat themselves. > > Jan 24 20:47:39 morocco python: hpssd[4108]: warning: Inrecognized URI: > parallel:/dev/lp0 > Jan 24 20:47:39 morocco kernel: [17208524.736000] ppdev0: registered > pardevice > Jan 24 20:47:39 morocco kernel: [17208524.756000] ppdev0: negotiated > back to compatibility mode because user-space forgot > Jan 24 20:47:39 morocco kernel: [17208524.756000] ppdev0: unregistered > pardevice > Jan 24 20:47:39 morocco kernel: [17208524.840000] ppdev0: registered > pardevice > Jan 24 20:48:55 morocco xsane: unable to fill data buffer: size=18411: > prnt/hpijs/hplip_api.c 450 > Jan 24 20:49:25 morocco hpiod: ParDevice::wait_status timeout status=7f > mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:49:26 morocco hpiod: ParDevice::wait_status timeout status=df > mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:49:57 morocco last message repeated 31 times > Jan 24 20:50:11 morocco last message repeated 14 times > Jan 24 20:50:11 morocco hpiod: unable to read MlcReverseData header: > Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 > io/hpiod/mlc.cpp 500 > Jan 24 20:50:41 morocco hpiod: ParDevice::wait_status timeout status=7f > mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:50:42 morocco hpiod: ParDevice::wait_status timeout status=df > mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:51:13 morocco last message repeated 31 times > Jan 24 20:51:27 morocco last message repeated 14 times > Jan 24 20:51:27 morocco hpiod: unable to read MlcReverseData header: > Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 > io/hpiod/mlc.cpp 500 > Jan 24 20:51:57 morocco hpiod: ParDevice::wait_status timeout status=7f > mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:51:58 morocco hpiod: ParDevice::wait_status timeout status=df > mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:52:29 morocco last message repeated 31 times > Jan 24 20:52:33 morocco last message repeated 4 times > Jan 24 20:52:34 morocco saned[9246]: saned (AF-indep+IPv6) from > sane-backends 1.0.18 ready > Jan 24 20:52:34 morocco saned[9246]: check_host: getpeername failed: > Socket operation on non-socket > Jan 24 20:52:34 morocco saned[9246]: init: access by host [error] denied > Jan 24 20:52:34 morocco saned[9246]: quit: exiting > Jan 24 20:52:34 morocco hpiod: ParDevice::wait_status timeout status=df > mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:52:43 morocco last message repeated 9 times > Jan 24 20:52:43 morocco hpiod: unable to read MlcReverseData header: > Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 > io/hpiod/mlc.cpp 500 > Jan 24 20:52:44 morocco hpiod: ParDevice::wait_status timeout status=df > mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 > Jan 24 20:53:15 morocco last message repeated 30 times > Jan 24 20:53:30 morocco last message repeated 15 times > Jan 24 20:53:30 morocco hpiod: unable to read MlcReverseData header: > Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 > io/hpiod/mlc.cpp 500 > Jan 24 20:53:31 morocco hpiod: ParDevice::wait_status timeout status=df > mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 > > /var/log/messages > Jan 24 19:25:29 morocco -- MARK -- > Jan 24 19:26:40 morocco kernel: [17203666.340000] lp0: ECP mode > Jan 24 19:37:21 morocco kernel: [17204306.968000] lp0: ECP mode > Jan 24 19:53:43 morocco kernel: [17205288.488000] lp0: ECP mode > Jan 24 20:05:29 morocco -- MARK -- > Jan 24 20:25:30 morocco -- MARK -- > Jan 24 20:32:21 morocco kernel: [17207606.420000] lp0: ECP mode > Jan 24 20:33:45 morocco kernel: [17207690.356000] lp0 out of paper > Jan 24 20:42:49 morocco python: hpssd[4108]: warning: Inrecognized URI: > parallel:/dev/lp0 > Jan 24 20:43:21 morocco xsane: unable to fill data buffer: size=18411: > prnt/hpijs/hplip_api.c 450 > Jan 24 20:47:08 morocco python: hpssd[4108]: warning: Inrecognized URI: > parallel:/dev/lp0 > Jan 24 20:47:09 morocco hpiod: channel cleanup ci=1 > Jan 24 20:47:09 morocco hpiod: channel cleanup ci=2 > Jan 24 20:47:10 morocco hpiod: device cleanup > uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 > Jan 24 20:47:39 morocco python: hpssd[4108]: warning: Inrecognized URI: > parallel:/dev/lp0 > Jan 24 20:48:55 morocco xsane: unable to fill data buffer: size=18411: > prnt/hpijs/hplip_api.c 450 > Jan 24 21:05:30 morocco -- MARK -- > Jan 24 21:07:28 morocco hpiod: channel cleanup ci=1 > Jan 24 21:07:28 morocco hpiod: channel cleanup ci=2 > Jan 24 21:07:29 morocco hpiod: device cleanup > uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 > > > Regards > > Dan Phillips > Suffield, David wrote: > >> I can't tell from the syslog messages if this is the same parallel port >> issues I have seen before. There are probably more syslog messages >> before the tail that would help determine what is happening. >> >> The previous parallel port problem was hpiod could not set the parallel >> port to software ECP mode. HPLIP only uses Software ECP not Hardware ECP >> and ECP is necessary for scanning. Software ECP mode is set via the >> ppdev/parport kernel module. If Software ECP mode is not available via >> ppdev/parport you may have to check your parallel port bios settings. >> >> We don't have a OJ 1170, but we will re-test HPLIP with another parallel >> port OJ on Ubuntu. >> >> -dave >> >> >> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] >>> [mailto:[EMAIL PROTECTED] On Behalf >>> Of Dan Phillips >>> Sent: Wednesday, January 24, 2007 9:16 AM >>> To: hplip-help@lists.sourceforge.net >>> Subject: [Hplip-help] Resend: Officejet 1170c scanning hangs >>> >>> I posted this last week. Can anyone help? Tell me to chill if >>> I am just being impatient, I can appreciate you guys could be >>> busy. I have noticed a few people with similar problems, but >>> with no solutions. I willing to put some effort into it, but >>> I need some direction. >>> >>> thanks >>> >>> Dan >>> >>> -------------------------------------------------------------- >>> ------------- >>> Hi everyone, >>> >>> I am revisiting this problem after a break of some months. >>> >>> I have an HP Officejet 1170c that hangs whenever I try to >>> scan through xsane. Xsane detects it ok and loads up and the >>> scanner makes the normal noise. When pressing Preview or Scan >>> the CPU hits 100% and stays there. >>> >>> Here is output of /var/log/messages >>> >>> dan[~]$ tail -f /var/log/messages >>> Jan 18 22:41:39 morocco kernel: [17190202.996000] lp0: ECP >>> mode Jan 18 22:41:39 morocco kernel: [17190203.016000] lp0: >>> ECP mode Jan 18 22:41:40 morocco kernel: [17190204.328000] >>> lp0: ECP mode Jan 18 22:42:33 morocco xsane: unable to fill >>> data buffer: size=18411: >>> prnt/hpijs/hplip_api.c 450 >>> Jan 18 22:45:11 morocco hpiod: channel cleanup ci=1 Jan 18 >>> 22:45:11 morocco hpiod: channel cleanup ci=2 Jan 18 22:45:12 >>> morocco hpiod: device cleanup >>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>> Jan 18 22:45:12 morocco hpiod: device active clientcnt=1 >>> channelcnt=0 >>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>> Jan 18 22:45:14 morocco hpiod: device cleanup >>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>> Jan 18 22:46:14 morocco xsane: unable to fill data buffer: >>> size=18411: >>> prnt/hpijs/hplip_api.c 450 >>> >>> Versions: >>> >>> HP Linux Imaging and Printing System (ver. 1.6.9) Device >>> Information Utility ver. 3.4 xsane 0.991 >>> >>> The scanner used to work with Suse 9.2, but since then I have >>> not had it working on any distributions. >>> >>> Currently I am running Ubuntu 6.10 and Debian Etch both with >>> the same results and have tried on other distributions. >>> >>> Any help would be appreciated. >>> >>> Kind Regards >>> >>> Daniel Phillips >>> >>> >>> -------------------------------------------------------------- >>> ----------- >>> Take Surveys. Earn Cash. Influence the Future of IT Join >>> SourceForge.net's Techsay panel and you'll get the chance to >>> share your opinions on IT & business topics through brief >>> surveys - and earn cash >>> http://www.techsay.com/default.php?page=join.php&p=sourceforge >>> &CID=DEVDEV >>> _______________________________________________ >>> HPLIP-Help mailing list >>> HPLIP-Help@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>> >>> >>> > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > _______________________________________________ > HPLIP-Help mailing list > HPLIP-Help@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/hplip-help > ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
