If you know the Motherboard's model name and number would you post that here for me...
thanks jh Dan Phillips wrote: > Hi David, > > Here is the list of modes: > > dan[~]$ cat /proc/sys/dev/parport/parport0/modes > PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA > > This is running on a pretty standard ASRock K7 motherboard with SiS > chipset. > > Dan > > Suffield, David wrote: >> Based on the "negotiated back to compatibility mode" syslog message, for >> some reason the ppdev/parport kernel module will not allow software ECP >> mode to be set. >> >> What does the following command return? This tell us what pp support is >> recognized by the kernel. >> >> cat /proc/sys/dev/parport/parport0/modes >> >> This is basic parallel port functionality and we can't reproduce this >> problem in-house. What kind of PC or motherboard are you using? >> >> -dave >> >> >>> -----Original Message----- >>> From: Dan Phillips [mailto:[EMAIL PROTECTED] >>> Sent: Tuesday, January 30, 2007 9:50 AM >>> To: Dan Phillips >>> Cc: Suffield, David; hplip-help@lists.sourceforge.net >>> Subject: Re: [Hplip-help] Resend: Officejet 1170c scanning hangs >>> >>> Has any progress been made on this? >>> >>> thanks >>> >>> Dan Phillips >>> >>> Dan Phillips wrote: >>> >>>> Hi Dave, >>>> >>>> >>>> Thanks for replying. >>>> >>>> Here is some more information. I have included system and messages >>>> logs >>>> >>>> ECP is enabled in the BIOS >>>> >>>> I am not sure how to check how to check Software ECP is >>>> >>> available, but >>> >>>> I can confirm the modules are loaded as below. >>>> >>>> dan[~]$ lsmod |grep parport >>>> parport_pc 37796 2 >>>> parport 39496 3 ppdev,lp,parport_pc >>>> dan[~]$ lsmod |grep ppdev >>>> ppdev 10500 2 >>>> parport 39496 3 ppdev,lp,parport_pc >>>> >>>> >>>> /var/log/system on Ubuntu 6.10 >>>> 20:47:39 Start >>>> 20:48:55 Press "Scan" >>>> Immediately CPU 100% >>>> At the end I left it running for 20 minutes, the messages >>>> >>> repeat themselves. >>> >>>> Jan 24 20:47:39 morocco python: hpssd[4108]: warning: >>>> >>> Inrecognized URI: >>> >>>> parallel:/dev/lp0 >>>> Jan 24 20:47:39 morocco kernel: [17208524.736000] ppdev0: >>>> >>> registered >>> >>>> pardevice Jan 24 20:47:39 morocco kernel: [17208524.756000] ppdev0: >>>> negotiated back to compatibility mode because user-space >>>> >>> forgot Jan 24 >>> >>>> 20:47:39 morocco kernel: [17208524.756000] ppdev0: unregistered >>>> pardevice Jan 24 20:47:39 morocco kernel: [17208524.840000] ppdev0: >>>> registered pardevice Jan 24 20:48:55 morocco xsane: unable to fill >>>> data buffer: size=18411: >>>> prnt/hpijs/hplip_api.c 450 >>>> Jan 24 20:49:25 morocco hpiod: ParDevice::wait_status timeout >>>> status=7f >>>> mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 Jan 24 >>>> >>> 20:49:26 >>> >>>> morocco hpiod: ParDevice::wait_status timeout status=df >>>> >>> mask=40 val=0 >>> >>>> us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:49:57 morocco last >>>> message repeated 31 times Jan 24 20:50:11 morocco last message >>>> repeated 14 times Jan 24 20:50:11 morocco hpiod: unable to read >>>> MlcReverseData header: >>>> Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>> io/hpiod/mlc.cpp 500 >>>> Jan 24 20:50:41 morocco hpiod: ParDevice::wait_status timeout >>>> status=7f >>>> mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 Jan 24 >>>> >>> 20:50:42 >>> >>>> morocco hpiod: ParDevice::wait_status timeout status=df >>>> >>> mask=40 val=0 >>> >>>> us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:51:13 morocco last >>>> message repeated 31 times Jan 24 20:51:27 morocco last message >>>> repeated 14 times Jan 24 20:51:27 morocco hpiod: unable to read >>>> MlcReverseData header: >>>> Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>> io/hpiod/mlc.cpp 500 >>>> Jan 24 20:51:57 morocco hpiod: ParDevice::wait_status timeout >>>> status=7f >>>> mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118 Jan 24 >>>> >>> 20:51:58 >>> >>>> morocco hpiod: ParDevice::wait_status timeout status=df >>>> >>> mask=40 val=0 >>> >>>> us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:52:29 morocco last >>>> message repeated 31 times Jan 24 20:52:33 morocco last message >>>> repeated 4 times Jan 24 20:52:34 morocco saned[9246]: saned >>>> (AF-indep+IPv6) from sane-backends 1.0.18 ready Jan 24 20:52:34 >>>> morocco saned[9246]: check_host: getpeername failed: >>>> Socket operation on non-socket >>>> Jan 24 20:52:34 morocco saned[9246]: init: access by host [error] >>>> denied Jan 24 20:52:34 morocco saned[9246]: quit: exiting Jan 24 >>>> 20:52:34 morocco hpiod: ParDevice::wait_status timeout status=df >>>> mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 Jan 24 20:52:43 >>>> morocco last message repeated 9 times Jan 24 20:52:43 >>>> >>> morocco hpiod: >>> >>>> unable to read MlcReverseData header: >>>> Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>> io/hpiod/mlc.cpp 500 >>>> Jan 24 20:52:44 morocco hpiod: ParDevice::wait_status timeout >>>> status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp >>>> >>> 118 Jan 24 >>> >>>> 20:53:15 morocco last message repeated 30 times Jan 24 20:53:30 >>>> morocco last message repeated 15 times Jan 24 20:53:30 >>>> >>> morocco hpiod: >>> >>>> unable to read MlcReverseData header: >>>> Success hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>> io/hpiod/mlc.cpp 500 >>>> Jan 24 20:53:31 morocco hpiod: ParDevice::wait_status timeout >>>> status=df mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118 >>>> >>>> /var/log/messages >>>> Jan 24 19:25:29 morocco -- MARK -- >>>> Jan 24 19:26:40 morocco kernel: [17203666.340000] lp0: ECP >>>> >>> mode Jan 24 >>> >>>> 19:37:21 morocco kernel: [17204306.968000] lp0: ECP mode Jan 24 >>>> 19:53:43 morocco kernel: [17205288.488000] lp0: ECP mode Jan 24 >>>> 20:05:29 morocco -- MARK -- Jan 24 20:25:30 morocco -- MARK >>>> >>> -- Jan 24 >>> >>>> 20:32:21 morocco kernel: [17207606.420000] lp0: ECP mode Jan 24 >>>> 20:33:45 morocco kernel: [17207690.356000] lp0 out of paper Jan 24 >>>> 20:42:49 morocco python: hpssd[4108]: warning: Inrecognized URI: >>>> parallel:/dev/lp0 >>>> Jan 24 20:43:21 morocco xsane: unable to fill data buffer: >>>> >>> size=18411: >>> >>>> prnt/hpijs/hplip_api.c 450 >>>> Jan 24 20:47:08 morocco python: hpssd[4108]: warning: >>>> >>> Inrecognized URI: >>> >>>> parallel:/dev/lp0 >>>> Jan 24 20:47:09 morocco hpiod: channel cleanup ci=1 Jan 24 20:47:09 >>>> morocco hpiod: channel cleanup ci=2 Jan 24 20:47:10 morocco hpiod: >>>> device cleanup >>>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>> Jan 24 20:47:39 morocco python: hpssd[4108]: warning: >>>> >>> Inrecognized URI: >>> >>>> parallel:/dev/lp0 >>>> Jan 24 20:48:55 morocco xsane: unable to fill data buffer: >>>> >>> size=18411: >>> >>>> prnt/hpijs/hplip_api.c 450 >>>> Jan 24 21:05:30 morocco -- MARK -- >>>> Jan 24 21:07:28 morocco hpiod: channel cleanup ci=1 Jan 24 21:07:28 >>>> morocco hpiod: channel cleanup ci=2 Jan 24 21:07:29 morocco hpiod: >>>> device cleanup >>>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>> >>>> >>>> Regards >>>> >>>> Dan Phillips >>>> Suffield, David wrote: >>>> >>>> >>>>> I can't tell from the syslog messages if this is the same parallel >>>>> port issues I have seen before. There are probably more syslog >>>>> messages before the tail that would help determine what is >>>>> >>> happening. >>> >>>>> The previous parallel port problem was hpiod could not set the >>>>> parallel port to software ECP mode. HPLIP only uses >>>>> >>> Software ECP not >>> >>>>> Hardware ECP and ECP is necessary for scanning. Software >>>>> >>> ECP mode is >>> >>>>> set via the ppdev/parport kernel module. If Software ECP >>>>> >>> mode is not >>> >>>>> available via ppdev/parport you may have to check your >>>>> >>> parallel port bios settings. >>> >>>>> We don't have a OJ 1170, but we will re-test HPLIP with another >>>>> parallel port OJ on Ubuntu. >>>>> >>>>> -dave >>>>> >>>>> >>>>> >>>>> >>>>>> -----Original Message----- >>>>>> From: [EMAIL PROTECTED] >>>>>> [mailto:[EMAIL PROTECTED] On >>>>>> >>> Behalf Of Dan >>> >>>>>> Phillips >>>>>> Sent: Wednesday, January 24, 2007 9:16 AM >>>>>> To: hplip-help@lists.sourceforge.net >>>>>> Subject: [Hplip-help] Resend: Officejet 1170c scanning hangs >>>>>> >>>>>> I posted this last week. Can anyone help? Tell me to >>>>>> >>> chill if I am >>> >>>>>> just being impatient, I can appreciate you guys could be busy. I >>>>>> have noticed a few people with similar problems, but with no >>>>>> solutions. I willing to put some effort into it, but I need some >>>>>> direction. >>>>>> >>>>>> thanks >>>>>> >>>>>> Dan >>>>>> >>>>>> -------------------------------------------------------------- >>>>>> ------------- >>>>>> Hi everyone, >>>>>> >>>>>> I am revisiting this problem after a break of some months. >>>>>> >>>>>> I have an HP Officejet 1170c that hangs whenever I try to scan >>>>>> through xsane. Xsane detects it ok and loads up and the scanner >>>>>> makes the normal noise. When pressing Preview or Scan the >>>>>> >>> CPU hits >>> >>>>>> 100% and stays there. >>>>>> >>>>>> Here is output of /var/log/messages >>>>>> >>>>>> dan[~]$ tail -f /var/log/messages >>>>>> Jan 18 22:41:39 morocco kernel: [17190202.996000] lp0: >>>>>> >>> ECP mode Jan >>> >>>>>> 18 22:41:39 morocco kernel: [17190203.016000] lp0: >>>>>> ECP mode Jan 18 22:41:40 morocco kernel: [17190204.328000] >>>>>> lp0: ECP mode Jan 18 22:42:33 morocco xsane: unable to fill data >>>>>> buffer: size=18411: >>>>>> prnt/hpijs/hplip_api.c 450 >>>>>> Jan 18 22:45:11 morocco hpiod: channel cleanup ci=1 Jan 18 >>>>>> 22:45:11 morocco hpiod: channel cleanup ci=2 Jan 18 >>>>>> >>> 22:45:12 morocco >>> >>>>>> hpiod: device cleanup >>>>>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>>>> Jan 18 22:45:12 morocco hpiod: device active clientcnt=1 >>>>>> channelcnt=0 >>>>>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>>>> Jan 18 22:45:14 morocco hpiod: device cleanup >>>>>> uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0 >>>>>> Jan 18 22:46:14 morocco xsane: unable to fill data buffer: >>>>>> size=18411: >>>>>> prnt/hpijs/hplip_api.c 450 >>>>>> >>>>>> Versions: >>>>>> >>>>>> HP Linux Imaging and Printing System (ver. 1.6.9) Device >>>>>> >>> Information >>> >>>>>> Utility ver. 3.4 xsane 0.991 >>>>>> >>>>>> The scanner used to work with Suse 9.2, but since then I have not >>>>>> had it working on any distributions. >>>>>> >>>>>> Currently I am running Ubuntu 6.10 and Debian Etch both with the >>>>>> same results and have tried on other distributions. >>>>>> >>>>>> Any help would be appreciated. >>>>>> >>>>>> Kind Regards >>>>>> >>>>>> Daniel Phillips >>>>>> >>>>>> >>>>>> -------------------------------------------------------------- >>>>>> ----------- >>>>>> Take Surveys. Earn Cash. Influence the Future of IT Join >>>>>> SourceForge.net's Techsay panel and you'll get the chance >>>>>> >>> to share >>> >>>>>> your opinions on IT & business topics through brief surveys - and >>>>>> earn cash >>>>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge >>>>>> &CID=DEVDEV >>>>>> _______________________________________________ >>>>>> HPLIP-Help mailing list >>>>>> HPLIP-Help@lists.sourceforge.net >>>>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>>>> >>>>>> >>>>>> >>>>>> >>>> >>> ---------------------------------------------------------------------- >>> >>>> --- Take Surveys. Earn Cash. Influence the Future of IT Join >>>> SourceForge.net's Techsay panel and you'll get the chance to share >>>> your opinions on IT & business topics through brief surveys >>>> >>> - and earn >>> >>>> cash >>>> >>>> >>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEV >>> >>>> DEV _______________________________________________ >>>> HPLIP-Help mailing list >>>> HPLIP-Help@lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/hplip-help >>>> >>>> > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
