tennevin yves wrote: > My main issue was when taking images of a panorama scene, the > overlapping area looked weird. (The images I linked were made with 6 > images.)
Do I understand correctly: The image on flickr is a mosaic of 6 images. In this case: did you first stitch the exposure steps and then enfuse or did you first enfuse the brackets and then stitch the result? However, almost any problems of this kind are caused by too less levels. If you first enfuse your source images the number of levels is limited by the image size and far smaller than the number that could be used on the stitched panorama. Moreover enfuse by default uses less levels than possible. This can be changed if you specify a very high number (-l 29 f.e) on the command line, which causes enfuse to use the maximum possible number. And finally there is tufuse, which implements the same algorithm but uses one level more than enfuse (in most cases). tufuse BTW does automatic focus bracketing if it encounters images with same exposure... -- Erik Krause http://www.erik-krause.de --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
