Hi Ricardo, Did you install vigra and/or jhead via MacPorts for some reason? If you did, please deactivate them (sudo port deactivate vigra; sudo port deactivate jhead) and reconfigure and recompile Hugin. If the configure script finds vigra "outside" hugin it will use that one.
You can find installed packages by running "port installed" or "port installed | grep <package>". The deactivate command will not uninstall the packages. It will only remove them from the install libraries. If you want them back you can simply use "sudo port activate <package>". Hoi, Harry 2009/4/13 RickyRicky <[email protected]> > > Hey Seth, > > Thanks for the tip on running Hugin from the command line. I did so, > and here are the lines before the big crash. I hope someone can > recognize my problem!: > > Determining placement of the images: 53% > Number of images 2 > Hugin(77452,0xa06cd830) malloc: *** error for object 0x2a2c200: double > free > *** set a breakpoint in malloc_error_break to debug > Optimizing Variables > Strategy 1 > Average (rms) distance between Controlpoints > after 0 iteration(s): 801.152704448697 units > Strategy 1 > Average (rms) distance between Controlpoints > after 1 iteration(s): 801.019725960169 units > > Optimizing Variables > Strategy 2 > Average (rms) distance between Controlpoints > after 0 iteration(s): 57.1154776303789 units > Strategy 2 > Average (rms) distance between Controlpoints > after 1 iteration(s): 56.9698889445181 units > Strategy 2 > Average (rms) distance between Controlpoints > after 2 iteration(s): 8.60724772529945 units > Strategy 2 > Average (rms) distance between Controlpoints > after 3 iteration(s): 7.72758159217231 units > Strategy 2 > Average (rms) distance between Controlpoints > after 4 iteration(s): 6.58494386005708 units > Strategy 2 > Average (rms) distance between Controlpoints > after 5 iteration(s): 5.40204786941155 units > Strategy 2 > Average (rms) distance between Controlpoints > after 6 iteration(s): 3.79597859019421 units > Strategy 2 > Average (rms) distance between Controlpoints > after 7 iteration(s): 1.66872838105291 units > Strategy 2 > Average (rms) distance between Controlpoints > after 8 iteration(s): 0.479946564550839 units > Strategy 2 > Average (rms) distance between Controlpoints > after 9 iteration(s): 0.479481987047642 units > Strategy 2 > Average (rms) distance between Controlpoints > after 10 iteration(s): 0.479481986986529 units > > Bus error > > > > Thanks, > Ricardo Meleschi > > > > On Apr 13, 10:58 am, Seth Berrier <[email protected]> wrote: > > Hmm, well I got this compiler problem while compiling on my MacBook > > (incidentally, I didn't think 10.5 would run on powerpc arch anymore, > glad > > to know). However, I ignored the error message and things still seem to > > work okay for me. The Hugin.app and all the supporting applications are > > built and installed correctly. I had to monkey with the path setting a > > little bit. For that, you can check out this > > thread< > http://groups.google.com/group/hugin-ptx/browse_thread/thread/3efbca4...>. > > However, the path problem will come up when you do auto control point > > detection or with the final stitch as this is when external programs are > > used. I don't think this woulod cause problems at position optimization. > > > > My best advice would be to run hugin from the terminal shell (just run > <path > > to hugin.app>/Hugin.app/Contents/MacOS/Hugin) You might get more > messages > > from the terminal output. > > > > Seth > > > > > > > > On Mon, Apr 13, 2009 at 9:34 AM, RickyRicky <[email protected]> wrote: > > > > > Gents, > > > > > I've been working on compiling Hugin these last few days and have > > > succeeded in getting it compiled, but for some reason whenever I run > > > Hugin and attempt to align images, hugin always crashes when > > > determining placement of the image, after Celeste is run. I don't see > > > a log file being generated anywhere. I'm not too familiar with Hugin > > > so I may be looking in the wrong places. > > > > > When I review my compile log, I see I was having problems with LAPACK: > > > ----------- > > > [ 3%] Building CXX object src/foreign/jhead/CMakeFiles/huginjhead.dir/ > > > exif.o > > > In file included from /Users/meleschi/src/hugin/src/foreign/levmar/ > > > misc.c:42: > > > /Users/meleschi/src/hugin/src/foreign/levmar/misc_core.c:562:2: > > > warning: #warning LAPACK not available, LU will be used for matrix > > > inversion when computing the covariance; this might be unstable at > > > times > > > In file included from /Users/meleschi/src/hugin/src/foreign/levmar/ > > > misc.c:57: > > > /Users/meleschi/src/hugin/src/foreign/levmar/misc_core.c:562:2: > > > warning: #warning LAPACK not available, LU will be used for matrix > > > inversion when computing the covariance; this might be unstable at > > > times > > > [ 3%] Building C object src/foreign/levmar/CMakeFiles/huginlevmar.dir/ > > > lmlec.o > > > /Users/meleschi/src/hugin/src/foreign/levmar/lmlec.c:39:2: warning: > > > #warning Linearly constrained optimization requires LAPACK and was not > > > compiled! > > > ------------- > > > > > I've searched on the above problem but haven't found exact > > > instructions as to how to resolve it. The closest I've found is this: > > > ----- > > > I had the same problem with Xcode with OS 10.5. In OS 10.5 LAPACK is > > > part of the Accelerate framework. > > > I put this into the project options > > > OTHER_LDFLAGS = "-framework Accelerate" > > > I'm not sure if this is the correct syntax but it did get rid of the > > > LAPACK warnings. > > > ---- > > > > > Where exactly do I put the OTHER_LDFLAG option? I've tried multiple > > > places with no joy. > > > > > I'm running 12 GB of ram on a Dual 2 GHz PowerPC G5 with OSX 10.5.6 > > > fully patched. > > > > > The svn revision is 3784. I did follow the instructions on > > >http://wiki.panotools.org/Hugin_Compiling_OSX. > > > > > Here's the info on the ports I have installed... > > > > > BigDaddy:Application meleschi$ sudo port info boost tiff jpeg libpng > > > wxWidgets subversion openexr exiv2 glew > > > boost @1.38.0 (devel) > > > Variants: darwin, darwin_9, debug, docs, graphml, icu, openmpi, > > > python24, python25, python26, st > > > > > -- > > > tiff @3.8.2, Revision 3 (graphics) > > > Variants: macosx, universal > > > > > -- > > > jpeg @6b, Revision 3 (graphics) > > > Variants: universal > > > > > -- > > > libpng @1.2.35 (graphics) > > > Variants: universal > > > > > -- > > > wxWidgets @2.8.10 (graphics, devel) > > > Variants: debug, nonmonolithic, universal > > > > > -- > > > subversion @1.6.1 (devel) > > > Variants: bash_completion, darwin_7, disable_keychain, > > > mac_os_x_server_mod_dav_svn, mod_dav_svn, no_bdb, no_neon, tools, > > > unicode_path > > > > > -- > > > openexr @1.6.1, Revision 1 (graphics) > > > Variants: universal > > > > > -- > > > exiv2 @0.18.1 (graphics) > > > Variants: universal > > > > > -- > > > glew @1.5.1, Revision 1 (graphics, devel) > > > Variants: universal > > > > > Thanks for any help! > > > Ricardo > > > > -- > > [email protected] > > Graduate Research Assistant > > University of Minnesota > > Digital Technology Center > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
