I'll take a look. No idea if I can help but it sounds like something I might be able to figure out.
Seth On Thu, Apr 16, 2009 at 1:45 AM, Harry van der Wolf <[email protected]>wrote: > Lapack is simply not correctly detected in hugin (actually in levmar). I > dug a little deeper and the routines to correctly detect BLAS and Lapack are > simply not there. Lapack and BLAS are available via the Accelerate framework > and via the vecLib framework on MacOSx. To maintain compatibility they are > even linked to in /usr/lib. > To test I also built hugin on Ubuntu with lapack (BLAS) installed (libs and > dev) and also there it is not detected. > I already tried to implement the FindBLAS.cmake and FindLapack.cmake > modules to detect it correctly but can't make it work (yet?). I know I'm on > the correct route but I simply lack the programming skills to make it a > success. I'm a builder, not a programmer. > > The warnings you get when compiling via cmake is what everyone gets on > every platform (as far as I can tell now). I can only say that all my builds > are also always using LU instead of Lapack/BLAS. > I will try to get it working but if I can't get it to work very soon, I > will simply file a bug and hope a programmer can take a look. > > Harry > > > > 2009/4/15 RickyRicky <[email protected]> > > >> Hello Harry, >> >> No, I do not have vigra or jhead installed as a part of MacPorts... >> >> BigDaddy:Application meleschi$ port installed | grep -i vigra >> BigDaddy:Application meleschi$ port installed | grep -i jhead >> >> Thanks... Anything else I can check? >> >> Ricardo >> >> On Apr 13, 1:29 pm, Harry van der Wolf <[email protected]> wrote: >> > Hi Ricardo, >> > >> > Did you install vigra and/or jhead via MacPorts for some reason? If you >> did, >> > please deactivate them (sudo port deactivate vigra; sudo port deactivate >> > jhead) and reconfigure and recompile Hugin. >> > If the configure script finds vigra "outside" hugin it will use that >> one. >> > >> > You can find installed packages by running "port installed" or "port >> > installed | grep <package>". >> > The deactivate command will not uninstall the packages. It will only >> remove >> > them from the install libraries. If you want them back you can simply >> use >> > "sudo port activate <package>". >> > >> > Hoi, >> > Harry >> > >> > 2009/4/13 RickyRicky <[email protected]> >> > >> > >> > >> > > Hey Seth, >> > >> > > Thanks for the tip on running Hugin from the command line. I did so, >> > > and here are the lines before the big crash. I hope someone can >> > > recognize my problem!: >> > >> > > Determining placement of the images: 53% >> > > Number of images 2 >> > > Hugin(77452,0xa06cd830) malloc: *** error for object 0x2a2c200: double >> > > free >> > > *** set a breakpoint in malloc_error_break to debug >> > > Optimizing Variables >> > > Strategy 1 >> > > Average (rms) distance between Controlpoints >> > > after 0 iteration(s): 801.152704448697 units >> > > Strategy 1 >> > > Average (rms) distance between Controlpoints >> > > after 1 iteration(s): 801.019725960169 units >> > >> > > Optimizing Variables >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 0 iteration(s): 57.1154776303789 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 1 iteration(s): 56.9698889445181 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 2 iteration(s): 8.60724772529945 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 3 iteration(s): 7.72758159217231 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 4 iteration(s): 6.58494386005708 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 5 iteration(s): 5.40204786941155 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 6 iteration(s): 3.79597859019421 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 7 iteration(s): 1.66872838105291 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 8 iteration(s): 0.479946564550839 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 9 iteration(s): 0.479481987047642 units >> > > Strategy 2 >> > > Average (rms) distance between Controlpoints >> > > after 10 iteration(s): 0.479481986986529 units >> > >> > > Bus error >> > >> > > Thanks, >> > > Ricardo Meleschi >> > >> > > On Apr 13, 10:58 am, Seth Berrier <[email protected]> wrote: >> > > > Hmm, well I got this compiler problem while compiling on my MacBook >> > > > (incidentally, I didn't think 10.5 would run on powerpc arch >> anymore, >> > > glad >> > > > to know). However, I ignored the error message and things still >> seem to >> > > > work okay for me. The Hugin.app and all the supporting applications >> are >> > > > built and installed correctly. I had to monkey with the path >> setting a >> > > > little bit. For that, you can check out this >> > > > thread< >> > > >> http://groups.google.com/group/hugin-ptx/browse_thread/thread/3efbca4.. >> .>. >> > > > However, the path problem will come up when you do auto control >> point >> > > > detection or with the final stitch as this is when external programs >> are >> > > > used. I don't think this woulod cause problems at position >> optimization. >> > >> > > > My best advice would be to run hugin from the terminal shell (just >> run >> > > <path >> > > > to hugin.app>/Hugin.app/Contents/MacOS/Hugin) You might get more >> > > messages >> > > > from the terminal output. >> > >> > > > Seth >> > >> > > > On Mon, Apr 13, 2009 at 9:34 AM, RickyRicky <[email protected]> >> wrote: >> > >> > > > > Gents, >> > >> > > > > I've been working on compiling Hugin these last few days and have >> > > > > succeeded in getting it compiled, but for some reason whenever I >> run >> > > > > Hugin and attempt to align images, hugin always crashes when >> > > > > determining placement of the image, after Celeste is run. I don't >> see >> > > > > a log file being generated anywhere. I'm not too familiar with >> Hugin >> > > > > so I may be looking in the wrong places. >> > >> > > > > When I review my compile log, I see I was having problems with >> LAPACK: >> > > > > ----------- >> > > > > [ 3%] Building CXX object >> src/foreign/jhead/CMakeFiles/huginjhead.dir/ >> > > > > exif.o >> > > > > In file included from >> /Users/meleschi/src/hugin/src/foreign/levmar/ >> > > > > misc.c:42: >> > > > > /Users/meleschi/src/hugin/src/foreign/levmar/misc_core.c:562:2: >> > > > > warning: #warning LAPACK not available, LU will be used for matrix >> > > > > inversion when computing the covariance; this might be unstable at >> > > > > times >> > > > > In file included from >> /Users/meleschi/src/hugin/src/foreign/levmar/ >> > > > > misc.c:57: >> > > > > /Users/meleschi/src/hugin/src/foreign/levmar/misc_core.c:562:2: >> > > > > warning: #warning LAPACK not available, LU will be used for matrix >> > > > > inversion when computing the covariance; this might be unstable at >> > > > > times >> > > > > [ 3%] Building C object >> src/foreign/levmar/CMakeFiles/huginlevmar.dir/ >> > > > > lmlec.o >> > > > > /Users/meleschi/src/hugin/src/foreign/levmar/lmlec.c:39:2: >> warning: >> > > > > #warning Linearly constrained optimization requires LAPACK and was >> not >> > > > > compiled! >> > > > > ------------- >> > >> > > > > I've searched on the above problem but haven't found exact >> > > > > instructions as to how to resolve it. The closest I've found is >> this: >> > > > > ----- >> > > > > I had the same problem with Xcode with OS 10.5. In OS 10.5 LAPACK >> is >> > > > > part of the Accelerate framework. >> > > > > I put this into the project options >> > > > > OTHER_LDFLAGS = "-framework Accelerate" >> > > > > I'm not sure if this is the correct syntax but it did get rid of >> the >> > > > > LAPACK warnings. >> > > > > ---- >> > >> > > > > Where exactly do I put the OTHER_LDFLAG option? I've tried >> multiple >> > > > > places with no joy. >> > >> > > > > I'm running 12 GB of ram on a Dual 2 GHz PowerPC G5 with OSX >> 10.5.6 >> > > > > fully patched. >> > >> > > > > The svn revision is 3784. I did follow the instructions on >> > > > >http://wiki.panotools.org/Hugin_Compiling_OSX. >> > >> > > > > Here's the info on the ports I have installed... >> > >> > > > > BigDaddy:Application meleschi$ sudo port info boost tiff jpeg >> libpng >> > > > > wxWidgets subversion openexr exiv2 glew >> > > > > boost @1.38.0 (devel) >> > > > > Variants: darwin, darwin_9, debug, docs, graphml, icu, openmpi, >> > > > > python24, python25, python26, st >> > >> > > > > -- >> > > > > tiff @3.8.2, Revision 3 (graphics) >> > > > > Variants: macosx, universal >> > >> > > > > -- >> > > > > jpeg @6b, Revision 3 (graphics) >> > > > > Variants: universal >> > >> > > > > -- >> > > > > libpng @1.2.35 (graphics) >> > > > > Variants: universal >> > >> > > > > -- >> > > > > wxWidgets @2.8.10 (graphics, devel) >> > > > > Variants: debug, nonmonolithic, universal >> > >> > > > > -- >> > > > > subversion @1.6.1 (devel) >> > > > > Variants: bash_completion, darwin_7, disable_keychain, >> > > > > mac_os_x_server_mod_dav_svn, mod_dav_svn, no_bdb, no_neon, tools, >> > > > > unicode_path >> > >> > > > > -- >> > > > > openexr @1.6.1, Revision 1 (graphics) >> > > > > Variants: universal >> > >> > > > > -- >> > > > > exiv2 @0.18.1 (graphics) >> > > > > Variants: universal >> > >> > > > > -- >> > > > > glew @1.5.1, Revision 1 (graphics, devel) >> > > > > Variants: universal >> > >> > > > > Thanks for any help! >> > > > > Ricardo >> > >> > > > -- >> > > > [email protected] >> > > > Graduate Research Assistant >> > > > University of Minnesota >> > > > Digital Technology Center >> > > > > > -- [email protected] Graduate Research Assistant University of Minnesota Digital Technology Center --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
