Hello Harry, No, I do not have vigra or jhead installed as a part of MacPorts...
BigDaddy:Application meleschi$ port installed | grep -i vigra BigDaddy:Application meleschi$ port installed | grep -i jhead Thanks... Anything else I can check? Ricardo On Apr 13, 1:29 pm, Harry van der Wolf <[email protected]> wrote: > Hi Ricardo, > > Did you install vigra and/or jhead via MacPorts for some reason? If you did, > please deactivate them (sudo port deactivate vigra; sudo port deactivate > jhead) and reconfigure and recompile Hugin. > If the configure script finds vigra "outside" hugin it will use that one. > > You can find installed packages by running "port installed" or "port > installed | grep <package>". > The deactivate command will not uninstall the packages. It will only remove > them from the install libraries. If you want them back you can simply use > "sudo port activate <package>". > > Hoi, > Harry > > 2009/4/13 RickyRicky <[email protected]> > > > > > Hey Seth, > > > Thanks for the tip on running Hugin from the command line. I did so, > > and here are the lines before the big crash. I hope someone can > > recognize my problem!: > > > Determining placement of the images: 53% > > Number of images 2 > > Hugin(77452,0xa06cd830) malloc: *** error for object 0x2a2c200: double > > free > > *** set a breakpoint in malloc_error_break to debug > > Optimizing Variables > > Strategy 1 > > Average (rms) distance between Controlpoints > > after 0 iteration(s): 801.152704448697 units > > Strategy 1 > > Average (rms) distance between Controlpoints > > after 1 iteration(s): 801.019725960169 units > > > Optimizing Variables > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 0 iteration(s): 57.1154776303789 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 1 iteration(s): 56.9698889445181 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 2 iteration(s): 8.60724772529945 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 3 iteration(s): 7.72758159217231 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 4 iteration(s): 6.58494386005708 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 5 iteration(s): 5.40204786941155 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 6 iteration(s): 3.79597859019421 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 7 iteration(s): 1.66872838105291 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 8 iteration(s): 0.479946564550839 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 9 iteration(s): 0.479481987047642 units > > Strategy 2 > > Average (rms) distance between Controlpoints > > after 10 iteration(s): 0.479481986986529 units > > > Bus error > > > Thanks, > > Ricardo Meleschi > > > On Apr 13, 10:58 am, Seth Berrier <[email protected]> wrote: > > > Hmm, well I got this compiler problem while compiling on my MacBook > > > (incidentally, I didn't think 10.5 would run on powerpc arch anymore, > > glad > > > to know). However, I ignored the error message and things still seem to > > > work okay for me. The Hugin.app and all the supporting applications are > > > built and installed correctly. I had to monkey with the path setting a > > > little bit. For that, you can check out this > > > thread< > >http://groups.google.com/group/hugin-ptx/browse_thread/thread/3efbca4...>. > > > However, the path problem will come up when you do auto control point > > > detection or with the final stitch as this is when external programs are > > > used. I don't think this woulod cause problems at position optimization. > > > > My best advice would be to run hugin from the terminal shell (just run > > <path > > > to hugin.app>/Hugin.app/Contents/MacOS/Hugin) You might get more > > messages > > > from the terminal output. > > > > Seth > > > > On Mon, Apr 13, 2009 at 9:34 AM, RickyRicky <[email protected]> wrote: > > > > > Gents, > > > > > I've been working on compiling Hugin these last few days and have > > > > succeeded in getting it compiled, but for some reason whenever I run > > > > Hugin and attempt to align images, hugin always crashes when > > > > determining placement of the image, after Celeste is run. I don't see > > > > a log file being generated anywhere. I'm not too familiar with Hugin > > > > so I may be looking in the wrong places. > > > > > When I review my compile log, I see I was having problems with LAPACK: > > > > ----------- > > > > [ 3%] Building CXX object src/foreign/jhead/CMakeFiles/huginjhead.dir/ > > > > exif.o > > > > In file included from /Users/meleschi/src/hugin/src/foreign/levmar/ > > > > misc.c:42: > > > > /Users/meleschi/src/hugin/src/foreign/levmar/misc_core.c:562:2: > > > > warning: #warning LAPACK not available, LU will be used for matrix > > > > inversion when computing the covariance; this might be unstable at > > > > times > > > > In file included from /Users/meleschi/src/hugin/src/foreign/levmar/ > > > > misc.c:57: > > > > /Users/meleschi/src/hugin/src/foreign/levmar/misc_core.c:562:2: > > > > warning: #warning LAPACK not available, LU will be used for matrix > > > > inversion when computing the covariance; this might be unstable at > > > > times > > > > [ 3%] Building C object src/foreign/levmar/CMakeFiles/huginlevmar.dir/ > > > > lmlec.o > > > > /Users/meleschi/src/hugin/src/foreign/levmar/lmlec.c:39:2: warning: > > > > #warning Linearly constrained optimization requires LAPACK and was not > > > > compiled! > > > > ------------- > > > > > I've searched on the above problem but haven't found exact > > > > instructions as to how to resolve it. The closest I've found is this: > > > > ----- > > > > I had the same problem with Xcode with OS 10.5. In OS 10.5 LAPACK is > > > > part of the Accelerate framework. > > > > I put this into the project options > > > > OTHER_LDFLAGS = "-framework Accelerate" > > > > I'm not sure if this is the correct syntax but it did get rid of the > > > > LAPACK warnings. > > > > ---- > > > > > Where exactly do I put the OTHER_LDFLAG option? I've tried multiple > > > > places with no joy. > > > > > I'm running 12 GB of ram on a Dual 2 GHz PowerPC G5 with OSX 10.5.6 > > > > fully patched. > > > > > The svn revision is 3784. I did follow the instructions on > > > >http://wiki.panotools.org/Hugin_Compiling_OSX. > > > > > Here's the info on the ports I have installed... > > > > > BigDaddy:Application meleschi$ sudo port info boost tiff jpeg libpng > > > > wxWidgets subversion openexr exiv2 glew > > > > boost @1.38.0 (devel) > > > > Variants: darwin, darwin_9, debug, docs, graphml, icu, openmpi, > > > > python24, python25, python26, st > > > > > -- > > > > tiff @3.8.2, Revision 3 (graphics) > > > > Variants: macosx, universal > > > > > -- > > > > jpeg @6b, Revision 3 (graphics) > > > > Variants: universal > > > > > -- > > > > libpng @1.2.35 (graphics) > > > > Variants: universal > > > > > -- > > > > wxWidgets @2.8.10 (graphics, devel) > > > > Variants: debug, nonmonolithic, universal > > > > > -- > > > > subversion @1.6.1 (devel) > > > > Variants: bash_completion, darwin_7, disable_keychain, > > > > mac_os_x_server_mod_dav_svn, mod_dav_svn, no_bdb, no_neon, tools, > > > > unicode_path > > > > > -- > > > > openexr @1.6.1, Revision 1 (graphics) > > > > Variants: universal > > > > > -- > > > > exiv2 @0.18.1 (graphics) > > > > Variants: universal > > > > > -- > > > > glew @1.5.1, Revision 1 (graphics, devel) > > > > Variants: universal > > > > > Thanks for any help! > > > > Ricardo > > > > -- > > > [email protected] > > > Graduate Research Assistant > > > University of Minnesota > > > Digital Technology Center --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
