* From "Menno M Jansz" <[EMAIL PROTECTED]>
I was wondering this too.
I only had my RM1x for two days now, but it seems that there
is no way to record pattern muting and switching using the
RM1x alone. I had assumed that it would be able to record
this stuff into a pattern chain or song, but this appears
not the be the case. Or am I missing something?
Basically when in a Section ( pattern ) I like to be able to
record starting off with just say the a simple drum line
playing, and then slowly building up the tune by slowly
unmuting the other tracks ( phrases ) .
How do you folks build up your songs?
I finally went and read the manual, but this just confused
the hell out of me even more!
Regards,
Menno
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On
> Behalf Of Scott Kellogg
> Sent: 06 October 1999 15:09
> To: [EMAIL PROTECTED]
> Subject: Re: recording rm1x jamz
>
>
> * From Scott Kellogg <[EMAIL PROTECTED]>
>
> i haven't tried this sort of thing yet, but now you have
got
> me wondering if i
> could achieve the same effect in cakewalk. someone posted
a
> few days ago that
> the rm1x doesn't transmit section change messages, which
> might put the kaibosh
> on your plan.
>
> scott
>
> [EMAIL PROTECTED] wrote:
>
> > * From [EMAIL PROTECTED]
> >
> > HI all, I've got a ? i've been curious about for a
while.
> I want to record
> > myself playing the Rm1x into my old mc-50 mk II seq. I
> think there's 2
> > scenarios. A: Record the midi output of up to 16 rm1x
> tracks into 1 track
> > of the mc-50, which can hold up to 16 channels inside
one
> track (somehow).
> > In this case, all the pattern switching and muting could
be
> done and played
> > back over to the rm1x in song mode. But if it's in the
mc-50 as 1
> > multi-channeled track, how would it appear to the rm1x,
and
> how would you
> > split these parts back to their original channels on the
1x?
> >
> > Which leads me to scene 2: recording my section
triggering
> to the mc-50 as
> > single key presses (midi note #), only requiring 1
track.
> I'd then record
> > this back into the rm1x and voila (?), there would be
the sections
> > triggering per the button presses, like pattern chain
mode
> without the
> > preplanning etc. Or is the mc-50 inadequate for
recording
> multi-channel
> > midi performances to play back into the blue box, and I
> should look for
> > something else ... Any suggestions/info. are very
> appreciated at this
> > juncture.
> > Jim
> >
> >
____________________________________________________________
____
> > Get FREE voicemail, fax and email at
http://voicemail.excite.com
> > Talk online at http://voicechat.excite.com
> >
>
____________________________________________________________
__
> _____________
> > The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is
a
> free service
> > provided by TekLab and is open to all members of the
> Internet community.
> > For more information about this list and other TekLab
> Mailing lists visit
> > our web site:
http://www.teklab.com/services/mailinglists/
> > **> NEW: TekLab Music Technology Forums:
> http://www.teklab.com/forums/ <**
>
>
>
____________________________________________________________
__
> _____________
> The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a
free service
> provided by TekLab and is open to all members of the
Internet
> community.
> For more information about this list and other TekLab
Mailing
> lists visit
> our web site: http://www.teklab.com/services/mailinglists/
> **> NEW: TekLab Music Technology Forums:
> http://www.teklab.com/forums/ <**
>
___________________________________________________________________________
The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service
provided by TekLab and is open to all members of the Internet community.
For more information about this list and other TekLab Mailing lists visit
our web site: http://www.teklab.com/services/mailinglists/
**> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
