Thanx everyone, It looks like the CA-SYSVIEW/E PRIVATE command displays the LSQA size.
I have these values for the CICS region: LSQA 205 2.31M LSQA 215 108K LSQA 225 63.9K LSQA 255 9.03M Would these all be below the 16MB line? Gadi -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Rob Scott Sent: Wednesday, July 05, 2006 2:30 PM To: [email protected] Subject: Re: LSQA shortage Gadi, If you have MXI G2 (not MXI 4.3) you can issue the "USP" line command against the address space in the "DA" display This will summarise private area subpool storage by subpool+key - you can then drill down into the LSQA subpools for more information (the LSQA subpools are indicated by "LSQA" in the "Type" column). MXI 4.3 also has a "USP" command - but this does not include LSQA. You could also take an in-flight dump of the CICS region using the z/OS "DUMP" command and then use IPCS "VSMLIST" Rob Scott Rocket Software, Inc 275 Grove Street Newton, MA 02466 617-614-2305 [EMAIL PROTECTED] http://www.rs.com/portfolio/mxi/ -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of ??? ?? ??? Sent: 05 July 2006 09:18 To: [email protected] Subject: LSQA shortage Hi, Today we started getting LSQA Shortage messages (IEW4004I) form one of our CICS regions. How can I define the amount of LSQA for a task? How can I find out the size of LSQA and who is using it? I have CA-SYSVIEW/E, MXI and RMF available. TIA Gadi ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
