I ran into that one. You MUST run your SMPE Assembles pointing to the z/OS V1.9 ASSEMBLER AND BINDER libraries. They need to be JOBLIB or STEPLIB in your SMPE libraries. This is documented in the z/OS V1.9 PSP bucket
Otherwise the IPL blows up. Lizette > > I'll probably open an ETR in the morning, but I hope for some > thoughts here. My Serverpac order is now several months old. So, I > uploaded a report and ordered maintenance to current level. After some > work with excludes, I get an APPLY CHECK with rc=0. > > So, I run the APPLY and I get several (more than a dozen) like this: > > > > UA36789 HBB7740 GIM23911E 56 LINK-EDIT PROCESSING FAILED FOR > MODULE ITTTL IN LMOD IEANUC01 IN THE NUCLEUS > > LIBRARY. THE RETURN CODE WAS 12. > THE SEQUENCE NUMBER WAS 000522. THE SYSPRINT > > FILE WAS SMP00111. > > > > > Messages as above, all the other PTFs (anything that doesn't touch > NUCLEUS) go on clean. What am I missing? > > > > As you might imagine, I'm a little reluctant to good forward with > potential nucleus problems. > > > > Running on a 1.7 driving system. Damn, should I be using the 1.9 > MIGLIB? > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
