Thank you, of course I should have done that. What I get for doing one of these only every two or three years. And I missed it in the PSP and/or migration doc. My next question is: Since I did get 835 PTFs on (all that didn't involve NUCLEUS), can I go forward, or should I start over one more time? Or restore from back up to the pre APPLY state and run again. Or SMP/E restore?
> -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On > Behalf Of Lizette Koehler > Sent: Tuesday, July 22, 2008 4:46 AM > To: [email protected] > Subject: Re: Some insight on 1.9 install > > I ran into that one. You MUST run your SMPE Assembles pointing to the z/OS > V1.9 ASSEMBLER AND BINDER libraries. They need to be JOBLIB or STEPLIB in > your SMPE libraries. This is documented in the z/OS V1.9 PSP bucket > > Otherwise the IPL blows up. > > Lizette > > > > > > I'll probably open an ETR in the morning, but I hope for some > > thoughts here. My Serverpac order is now several months old. So, I > > uploaded a report and ordered maintenance to current level. After some > > work with excludes, I get an APPLY CHECK with rc=0. > > > > So, I run the APPLY and I get several (more than a dozen) like this: > > > > > > > > UA36789 HBB7740 GIM23911E 56 LINK-EDIT PROCESSING FAILED FOR > > MODULE ITTTL IN LMOD IEANUC01 IN THE NUCLEUS > > > > LIBRARY. THE RETURN CODE WAS 12. > > THE SEQUENCE NUMBER WAS 000522. THE SYSPRINT > > > > FILE WAS SMP00111. > > > > > > > > > > Messages as above, all the other PTFs (anything that doesn't touch > > NUCLEUS) go on clean. What am I missing? > > > > > > > > As you might imagine, I'm a little reluctant to good forward with > > potential nucleus problems. > > > > > > > > Running on a 1.7 driving system. Damn, should I be using the 1.9 > > MIGLIB? > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
