For one IBM PP, they had a zosmf process for customising. It made the
trivial bits easier, and ignored the hard bits eg  setting up SMS and RACF
definitions. Once configured I could not see how to change the
configuration. For setting up second instance you had to start from the
beginning.

If z/osmf is the answer perhaps the configuration could have
novice/intermediate/ expert. For novice it should hide standard defaults
and show what you MUST configure. For expert it shows all options. Help
displays novice
/ Intermediate / expert levels as well
Colin

On Wed, May 24, 2023, 18:52 Shaffer, Terri <
[email protected]> wrote:

> Completely agree with the overhead and complicatedness!
>
> You know what's sad, is when I started in mainframes 39 years ago, The old
> IBM SE sat with me gave me the basics, etc and said go for it on a test
> system. And you learned actually what each process did.  I have seen even
> today system programmers that are clueless, all they were told was follow
> steps 1 thru 10, and if it fails in step x, they have no clue what to do.
> This is the problem with z/OSMF and especially the new software instance
> install BS, its trying to make it idiot proof, but everyones SMS, volumes,
> catalogs, etc are all different and it doesn't work, or not easily.
>
> Us old timers, are the only ones that really understand z/OS, could build
> a system from scratch, understand NIP, NET, JES2 and how everything works
> together.  I have worked at 7 different companies in my 39 years and
> maintenance was pretty much always done the same way.  Build the jobs once,
> change Volsers, zones, etc and submit.
>
> No GUI clicky BS, processor intensive, certificate ridden process, that's
> removed from the actual LPAR.  And when z/OSMF doesn't work, then deer in
> headlights start to occur!
>
> Ms Terri E Shaffer
> Senior Systems Engineer,
> z/OS Support:
> ACIWorldwide - Telecommuter
> H(412-766-2697) C(412-519-2592)
> [email protected]
>
> -----Original Message-----
> From: IBM Mainframe Discussion List <[email protected]> On Behalf
> Of Pommier, Rex
> Sent: Tuesday, March 7, 2023 10:53 AM
> To: [email protected]
> Subject: Re: [EXTERNAL] Re: zOSMF
>
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe.
>
>
> Hi Rob and Terri,
>
> I'll weigh in here from the opposite end of the spectrum.  From my POV,
> z/OSMF is nothing but overhead for us.  We have a very small system.  2
> LPARs, no sysplex, nothing difficult about it.  We build a new OS on one of
> them and clone it to the other and we're done.  All z/OSMF is going to do
> for us is add complexity to a simple system.  And I agree with Terri and
> Barbara that the next gen of sysprog won't have a clue where to go looking
> when z/OSMF breaks.
>
> Rex
>
> -----Original Message-----
> From: IBM Mainframe Discussion List <[email protected]> On Behalf
> Of Rob Schramm
> Sent: Monday, March 6, 2023 9:18 PM
> To: [email protected]
> Subject: [EXTERNAL] Re: zOSMF
>
> See you are missing the point.
>
> If you have 117 lpars, of course you going to work on making the process
> actually work.  Because every minute you save in that process is worth 2
> hours. The point is is that for each institution that's done that there's a
> bunch that haven't or they've got some jammed together process that breaks
> every single time that somebody new touches it.  And it's not standardized
> then it's not maintained and it's poorly documented and it's... you know...
> ad infinitum ad nauseam.  So for you ... I agree it's probably more of a
> pain in the neck.  And there will probably be some sort of compromise
> eventually.  But for all the people that have these other processes, I
> think the standardization that is going to come from this will ultimately
> make this a lot easier. And the dealing with the myriad of ISP software and
> IBM non server pack software or stuff that could be on the server pack but
> doesn't actually belong there... This should help immeasurably so once
> again I will disagree with your disagreement.
>
> Rob
>
> On Mon, Mar 6, 2023, 20:12 Shaffer, Terri <
> [email protected]> wrote:
>
> > When I worked at Chase bank, We had 117 LPARS and maintenance/clone
> > was a
> > 30 minute task. So adding z/OSMF was never even brought up as a
> > consideration.
> >
> > So while I understand the direction IBM is headed, its adding LOTS of
> > layers to something that sound not be hard.   Running thru screens vs
> > submitting a canned job, is hours vs minutes.
> >
> > As much as I love my job and starting with MVS 1.3.8 to now z/OS 2.5
> > and even OS/390, they have added a layer of complexity that eliminated
> > the KISS principle, sadly.
> >
> > So I have to disagree..........
> >
> > Ms Terri E Shaffer
> > Senior Systems Engineer,
> > z/OS Support:
> > ACIWorldwide - Telecommuter
> > H(412-766-2697) C(412-519-2592)
> > [email protected]
> >
> > -----Original Message-----
> > From: IBM Mainframe Discussion List <[email protected]> On
> > Behalf Of Rob Schramm
> > Sent: Monday, March 6, 2023 4:27 PM
> > To: [email protected]
> > Subject: Re: zOSMF
> >
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know
> > the content is safe.
> >
> >
> > I think the promise of zosmf is far beyond just a server pack
> replacement.
> > Yeah server pack was great for what it was but when it comes to the
> > grind of installing over and over and over again and the customization
> > the workflow features I believe really hold the promise to fixing what
> > is a continuously pain in the butt situation.  And hopefully they'll
> > continue to make it lighter and lighter.  But the other part is the
> > distribution points and the packaging for distribution.  Yeah I don't
> > really care how it happens whether it's a GUI or not.  But in my view
> > this is steps in the right direction.
> >
> > I would point you to Ed's presentation on the workflow features that
> > were incorporated to E/JES2 installation.  I really think there's
> something here.
> >
> > Just my two cents.
> >
> > Rob Schramm
> >
> > On Mon, Mar 6, 2023, 12:06 Michael Babcock <[email protected]>
> wrote:
> >
> > > I agree.   We use a permanent maintenance LPAR which is generally not
> up.
> > > With ServerPac, it didn't matter we could select it as the target
> > > from
> > our
> > > driving system.   With z/OSMF, if run on the driving system, z/OSMF
> > wanted
> > > the target up and wanted to communicate with it via z/OSMF.  Not
> > > good for us.
> > >
> > > Further, PSWI uses DSS to restore the datasets and ignores any
> > > DATACLAS parameters.  Our OMVS datasets are all EXTADDR so we had to
> > > build a REXX EXEC to copy the OMVS datasets to a newly allocated
> > > OMVS
> > dataset with the
> > > EXTADDR attribute.   Which by the way, what happens when the ROOT grows
> > > beyond 4GB?
> > >
> > > There were a number of other things we ran into which escape me at
> > > the moment.
> > >
> > > On Mon, Mar 6, 2023 at 10:15 AM Shaffer, Terri <
> > > [email protected]> wrote:
> > >
> > > > Randy,
> > > >   I completely agree, This will be my 40th year working on z/OS
> > > > and at least another 7 years to go.
> > > >
> > > > I find z/OSMF cumbersome.  I prefer to do things close to the source.
> > > Not
> > > > a tool to add layers of complexity and places to go wrong with yet
> > > > more strange messages.
> > > >
> > > > I installed z/OS 2.5 before they eliminated SERVERPAC.  I then
> > > > ordered it again to try it thru z/OSMF, it added a lot more time,
> > > > the SSA's, my SMS ACS routines and how things got built added to
> > > > the complexity.  Plus
> > > there
> > > > are many times I would bypass steps in serverpac, that because
> > > > z/OSMF is performing what they call checks, think idiot proofing,
> > > > makes this even more difficult.
> > > >
> > > > More to come, but if I find work arounds, I will bypass in the
> > > > future
> > > what
> > > > I can in z/OSMF software installs.
> > > >
> > > >
> > > > Ms Terri E Shaffer
> > > > Senior Systems Engineer,
> > > > z/OS Support:
> > > > ACIWorldwide - Telecommuter
> > > > H(412-766-2697) C(412-519-2592)
> > > > [email protected]
> > > >
> > > > -----Original Message-----
> > > > From: IBM Mainframe Discussion List <[email protected]> On
> > > > Behalf Of Harris Randy - Nashville
> > > > Sent: Friday, March 3, 2023 9:03 AM
> > > > To: [email protected]
> > > > Subject: Re: zOSMF
> > > >
> > > > EXTERNAL EMAIL: Do not click links or open attachments unless you
> > > > know
> > > the
> > > > content is safe.
> > > >
> > > >
> > > > I'm sure my complaints don't do any good, but I've been doing this
> > > > for 25 years (I know many of you a lot longer).
> > > > I don't understand why IBM wants to force everyone to use z/OSMF.
> > > > Maybe it's an attempt to attract a younger group of System
> Programmers.
> > > > That's fine. However, I am not a GUI fan. I like the green screen.
> > > > Serverpac works great. I am running into issues trying to learn
> z/OSMF.
> > > > It's a waste of my time when I already know how to use Serverpac.
> > > >
> > > > Randy Harris
> > > > P 615-344-3244
> > > > C 662-401-8552
> > > > [email protected]
> > > >
> > > > -----Original Message-----
> > > > From: IBM Mainframe Discussion List <[email protected]> On
> > > > Behalf Of rpinion865
> > > > Sent: Thursday, February 16, 2023 9:37 AM
> > > > To: [email protected]
> > > > Subject: {EXTERNAL} zOSMF
> > > >
> > > > CAUTION! This email originated from outside of our organization.
> > > > DO NOT CLICK links or open attachments unless you recognize the
> > > > sender and know the content is safe.
> > > >
> > > > Running zOSMF under z/OS 2.4. In attempting to load the Portable
> > > > Software Instance, retrieving the contents from the directory,
> > > > that was used when the order was retrieved to our system, I get
> > > > the
> > following error.
> > > >
> > > > An error was found in file "/u/pinionr/TDMF/IZUD00DF.json". Error:
> > > > "The file contains data that is not supported by the current level
> > > > of
> > z/OSMF.
> > > > The version = 8."IZUD277E Feb 16, 2023, 10:14:02 AM
> > > >
> > > > I have no idea how to proceed. If I need to apply maintenance to
> > > > zOSMF, how would I be able to proceed?
> > > >
> > > > Sent with [Proton Mail](
> > > >
> > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fur
> > > ldefense.com%2Fv3%2F__https%3A%2F%2Fnam11.safelinks.protection.outlo
> > > &data=05%7C01%7Cterri.shaffer%40ACIWORLDWIDE.COM%7Cd90aac7c17b944dd7
> > > 9f408db1f241223%7Cd1b7f1185cb24d4e85a382e07efb07e9%7C1%7C0%7C6381380
> > > 12051720551%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2lu
> > > MzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=dz9qMZVsF%2
> > > B2bFGBTFinxj%2B1G6gN9L2uGIiuRdNj2Z10%3D&reserved=0
> > > ok.com/?url=https*3A*2F*2Furld__;JSUl!!KjMRP1Ixj6eLE0Fj!rxhZRQ70IpKR
> > > 47iJbWoCfmDc7n6B-nKoMN9VZg8glu3UNLzLgwJT2WzbJqUKsPgRmUFtTdRdYF-7jlEo
> > > _dElzGg$
> > > efense.com%2Fv3%2F__https%3A%2F%2Fproton.me%2F__%3B!!LgPfcEISpGU!vlU
> > > 0i
> > > qbugIfvV7HijMEm4JcqCCtIGOVes01SZ-URq4XEkFMGC84ma_3q1ruW8IaDqiRE%24&d
> > > at
> > > a=05%7C01%7Cterri.shaffer%40ACIWORLDWIDE.COM%7Ca0dd1c4a8352400497e00
> > > 8d
> > > b1e898c1b%7Cd1b7f1185cb24d4e85a382e07efb07e9%7C1%7C0%7C6381373483674
> > > 22
> > > 999%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJB
> > > Ti
> > > I6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=xzDjJ5OvE8hzffjE%2FJu
> > > ZH
> > > 77r7cbEbFvrBAt0vQQmZ7g%3D&reserved=0
> > > > ) secure email.
> > > >
> > > > ------------------------------------------------------------------
> > > > --
> > > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > > send
> > > email
> > > > to [email protected] with the message: INFO IBM-MAIN
> > > >
> > > > ------------------------------------------------------------------
> > > > --
> > > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > > send
> > > email
> > > > to [email protected] with the message: INFO IBM-MAIN
> > > > ________________________________
> > > > [https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2
> > > > Furldefense.com%2Fv3%2F__https%3A%2F%2Fgo.aciworldwide.com%2Frs%2F
> > > > 030-RO&data=05%7C01%7Cterri.shaffer%40ACIWORLDWIDE.COM%7Cd90aac7c1
> > > > 7b944dd79f408db1f241223%7Cd1b7f1185cb24d4e85a382e07efb07e9%7C1%7C0
> > > > %7C638138012051720551%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAi
> > > > LCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sda
> > > > ta=KfqYeBzpDd%2F9lTANOQERluhJhBrLjrXXV12IkiKINNA%3D&reserved=0
> > > > K-804/images/aci-footer.jpg__;!!KjMRP1Ixj6eLE0Fj!rxhZRQ70IpKR47iJb
> > > > WoCfmDc7n6B-nKoMN9VZg8glu3UNLzLgwJT2WzbJqUKsPgRmUFtTdRdYF-7jlEoP29
> > > > 3pBo$ ] <
> > > > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2F
> > > > urldefense.com%2Fv3%2F__http%3A%2F%2Fwww.aciworldwide.com__%3B!!Kj
> > > > MRP1&data=05%7C01%7Cterri.shaffer%40ACIWORLDWIDE.COM%7Cd90aac7c17b
> > > > 944dd79f408db1f241223%7Cd1b7f1185cb24d4e85a382e07efb07e9%7C1%7C0%7
> > > > C638138012051720551%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLC
> > > > JQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata
> > > > =6rPA6oPqbeLrCqv0WpcA%2BSu3dWH0WBQ7cNHqzm5cn4s%3D&reserved=0
> > > > Ixj6eLE0Fj!rxhZRQ70IpKR47iJbWoCfmDc7n6B-nKoMN9VZg8glu3UNLzLgwJT2Wz
> > > > bJqUKsPgRmUFtTdRdYF-7jlEoDq2srro$ > This email message and any
> > > > attachments may contain confidential, proprietary or non-public
> > > > information. The information is intended solely for the designated
> > > > recipient(s). If an addressing or transmission error
> > > has
> > > > misdirected this email, please notify the sender immediately and
> > > > destroy this email. Any review, dissemination, use or reliance
> > > > upon this information by unintended recipients is prohibited. Any
> > > > opinions
> > > expressed
> > > > in this email are those of the author personally.
> > > >
> > > > ------------------------------------------------------------------
> > > > --
> > > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > > send email to [email protected] with the message: INFO
> > > > IBM-MAIN
> > > >
> > > --
> > > Michael Babcock
> > > OneMain Financial
> > > z/OS Systems Programmer, Lead
> > >
> > > --------------------------------------------------------------------
> > > -- For IBM-MAIN subscribe / signoff / archive access instructions,
> > > send email to [email protected] with the message: INFO
> > > IBM-MAIN
> > >
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO IBM-MAIN
> > ________________________________
> > [https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Furl
> > defense.com%2Fv3%2F__https%3A%2F%2Fgo.aciworldwide.com%2Frs%2F030-ROK-
> > 80&data=05%7C01%7Cterri.shaffer%40ACIWORLDWIDE.COM%7Cd90aac7c17b944dd7
> > 9f408db1f241223%7Cd1b7f1185cb24d4e85a382e07efb07e9%7C1%7C0%7C638138012
> > 051876797%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIi
> > LCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=imymRBukmSIDQT9GY
> > eAbm7XPHdLU0evTwAAUN%2FTisOQ%3D&reserved=0
> > 4/images/aci-footer.jpg__;!!KjMRP1Ixj6eLE0Fj!rxhZRQ70IpKR47iJbWoCfmDc7
> > n6B-nKoMN9VZg8glu3UNLzLgwJT2WzbJqUKsPgRmUFtTdRdYF-7jlEoP293pBo$ ] <
> > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Furld
> > efense.com%2Fv3%2F__http%3A%2F%2Fwww.aciworldwide.com__%3B!!KjMRP1Ixj6
> > &data=05%7C01%7Cterri.shaffer%40ACIWORLDWIDE.COM%7Cd90aac7c17b944dd79f
> > 408db1f241223%7Cd1b7f1185cb24d4e85a382e07efb07e9%7C1%7C0%7C63813801205
> > 1876797%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLC
> > JBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=Gsu4rtfJ6mjWHlQdShK
> > tqVq%2B2kQ7dJmVoJUVa%2Fox4vI%3D&reserved=0
> > eLE0Fj!rxhZRQ70IpKR47iJbWoCfmDc7n6B-nKoMN9VZg8glu3UNLzLgwJT2WzbJqUKsPg
> > RmUFtTdRdYF-7jlEoDq2srro$ > This email message and any attachments may
> > contain confidential, proprietary or non-public information. The
> > information is intended solely for the designated recipient(s). If an
> > addressing or transmission error has misdirected this email, please
> notify the sender immediately and destroy this email. Any review,
> dissemination, use or reliance upon this information by unintended
> recipients is prohibited. Any opinions expressed in this email are those of
> the author personally.
> >
> > ----------------------------------------------------------------------
> > For IBM-MAIN subscribe / signoff / archive access instructions, send
> > email to [email protected] with the message: INFO IBM-MAIN
> >
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to [email protected] with the message: INFO IBM-MAIN
>
> ----------------------------------------------------------------------
> The information contained in this message is confidential, protected from
> disclosure and may be legally privileged. If the reader of this message is
> not the intended recipient or an employee or agent responsible for
> delivering this message to the intended recipient, you are hereby notified
> that any disclosure, distribution, copying, or any action taken or action
> omitted in reliance on it, is strictly prohibited and may be unlawful. If
> you have received this communication in error, please notify us immediately
> by replying to this message and destroy the material in its entirety,
> whether in electronic or hard copy format. Thank you.
>
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions, send email
> to [email protected] with the message: INFO IBM-MAIN
> ________________________________
>  [https://go.aciworldwide.com/rs/030-ROK-804/images/aci-footer.jpg] <
> http://www.aciworldwide.com>
> This email message and any attachments may contain confidential,
> proprietary or non-public information. The information is intended solely
> for the designated recipient(s). If an addressing or transmission error has
> misdirected this email, please notify the sender immediately and destroy
> this email. Any review, dissemination, use or reliance upon this
> information by unintended recipients is prohibited. Any opinions expressed
> in this email are those of the author personally.
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to