Are you doing any emulated I/O through the OS/2 SE? I recall back when we had an MP3000 we could have done disk or terminal I/O thru the SE. Could that be causing your problem? I know that on the full size mainframes, the SE basically goes into monitor mode once all LPARs are up and running, but I believe the SE has/had additional function on the multiprise boxes.
Rex -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Caserta, Greg Sent: Monday, August 26, 2013 8:58 AM To: [email protected] Subject: Re: OS/390 1.3 Support Element hangs system Yes OS/390 1.3 Machine - Multiprise 2000 ( 2003-116 ) No error messages anywhere. Consoles and entire system hang as if it was quiesced. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Elardus Engelbrecht Sent: Monday, August 26, 2013 9:01 AM To: [email protected] Subject: Re: OS/390 1.3 Support Element hangs system Caserta, Greg wrote: >Running OS/390 1 .3 OS/390? (End of support 2001/03/31) or do you mean z/OS 1.3 (End of support 2005/03/31)? On what machine model is that running? >- Every couple months the system hangs. Once I power off/on the Support >Element PC (OS/2), it breaks loose. Perhaps hardware problems? When your OS/390 is getting on, do you see any I/O errors, wait state, dumps, messages? Or could you be kind to describe 'hang'? Are the workload or sessions or console standing still or running slow? >This seemed to start about 2 yrs ago when I replaced the Ramac disk with the >Shark. Also replaced 3480 tape drives with 3590. I'm not sure if 3590 and Sharks are 100% supported by OS/390, but did you have a talk with your local IBM engineer? >Any ideas. Sorry that I cannot come up with any solutions or suggestions. But why now asking after 2 years? Groete / Greetings Elardus Engelbrecht ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN This email and any attachments may contain confidential and proprietary information and must be treated as such. In addition, export or re-export of the information contained in or attached to this email may be prohibited under export control laws. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN The information contained in this e-mail may contain confidential and/or privileged information and is intended for the sole use of the intended recipient. If you are not the intended recipient, you are hereby notified that any unauthorized use, disclosure, distribution or copying of this communication is strictly prohibited and that you will be held responsible for any such unauthorized activity, including liability for any resulting damages. As appropriate, such incident(s) may also be reported to law enforcement. If you received this e-mail in error, please reply to sender and destroy or delete the message and any attachments. Thank you. NOTICE: This e-mail message, including any attachments and appended messages, is for the sole use of the intended recipients and may contain confidential and legally privileged information. If you are not the intended recipient, any review, dissemination, distribution, copying, storage or other use of all or any portion of this message is strictly prohibited. If you received this message in error, please immediately notify the sender by reply e-mail and delete this message in its entirety. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
