Yes yellow stripe. No emulation being done. Sent from my iPhone
On Aug 26, 2013, at 3:26 PM, "Pommier, Rex R." <[email protected]> wrote: > I never used an MP2000, we ran an MP3000 for a few years. On the bigger > boxes the SE was (presumably still is) used for error reporting and other > communication back to IBM as well as IPLing, reconfiguring hardware and so > on. On the MP3000, it was also used (if configured so) for doing emulated > I/O. The MP3000 could have up to 288 GB internal disk that looked like CKD > disk to OS/390, but was in fact funneled through the OS/2 machine that also > functioned as the SE. TCP/IP communication could also be emulated and > funneled through the SE. On our MP3000 we didn't like the idea of either of > these being dependent on an OS/2 computer so we ran external ESCON disk and > had a pair of BUS-TECH pizza boxes handling terminal I/O. > > Is the MP2000 you are running the full size cabinet with the yellow "racing > stripe" on the front cover? > > Rex > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Caserta, Greg > Sent: Monday, August 26, 2013 1:29 PM > To: [email protected] > Subject: Re: OS/390 1.3 Support Element hangs system > > No, nothing fancy here. What is the SE's purpose after the OS is up and > running. I always thought I could unplug it unless I needed to IPL. > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Pommier, Rex R. > Sent: Monday, August 26, 2013 11:43 AM > To: [email protected] > Subject: Re: OS/390 1.3 Support Element hangs system > > Are you doing any emulated I/O through the OS/2 SE? I recall back when we > had an MP3000 we could have done disk or terminal I/O thru the SE. Could > that be causing your problem? I know that on the full size mainframes, the > SE basically goes into monitor mode once all LPARs are up and running, but I > believe the SE has/had additional function on the multiprise boxes. > > Rex > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Caserta, Greg > Sent: Monday, August 26, 2013 8:58 AM > To: [email protected] > Subject: Re: OS/390 1.3 Support Element hangs system > > Yes OS/390 1.3 > Machine - Multiprise 2000 ( 2003-116 ) > No error messages anywhere. Consoles and entire system hang as if it was > quiesced. > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:[email protected]] On > Behalf Of Elardus Engelbrecht > Sent: Monday, August 26, 2013 9:01 AM > To: [email protected] > Subject: Re: OS/390 1.3 Support Element hangs system > > Caserta, Greg wrote: > >> Running OS/390 1 .3 > > OS/390? (End of support 2001/03/31) or do you mean z/OS 1.3 (End of support > 2005/03/31)? > > On what machine model is that running? > >> - Every couple months the system hangs. Once I power off/on the Support >> Element PC (OS/2), it breaks loose. > > Perhaps hardware problems? > > When your OS/390 is getting on, do you see any I/O errors, wait state, dumps, > messages? Or could you be kind to describe 'hang'? Are the workload or > sessions or console standing still or running slow? > >> This seemed to start about 2 yrs ago when I replaced the Ramac disk with the >> Shark. Also replaced 3480 tape drives with 3590. > > I'm not sure if 3590 and Sharks are 100% supported by OS/390, but did you > have a talk with your local IBM engineer? > >> Any ideas. > > Sorry that I cannot come up with any solutions or suggestions. But why now > asking after 2 years? > > Groete / Greetings > Elardus Engelbrecht > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN > > > This email and any attachments may contain confidential and proprietary > information and must be treated as such. In addition, export or re-export of > the information contained in or attached to this email may be prohibited > under export control laws. > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN > > The information contained in this e-mail may contain confidential and/or > privileged information and is intended for the sole use of the intended > recipient. If you are not the intended recipient, you are hereby notified > that any unauthorized use, disclosure, distribution or copying of this > communication is strictly prohibited and that you will be held responsible > for any such unauthorized activity, including liability for any resulting > damages. As appropriate, such incident(s) may also be reported to law > enforcement. If you received this e-mail in error, please reply to sender and > destroy or delete the message and any attachments. Thank you. > > > > NOTICE: This e-mail message, including any attachments and appended > messages, is for the sole use of the intended recipients and may contain > confidential and legally privileged information. > If you are not the intended recipient, any review, dissemination, > distribution, copying, storage or other use of all or any portion of this > message is strictly prohibited. > If you received this message in error, please immediately notify the sender > by reply e-mail and delete this message in its entirety. > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN > > > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send email to > [email protected] with the message: INFO IBM-MAIN > > The information contained in this e-mail may contain confidential and/or > privileged information and is intended for the sole use of the intended > recipient. If you are not the intended recipient, you are hereby notified > that any unauthorized use, disclosure, distribution or copying of this > communication is strictly prohibited and that you will be held responsible > for any such unauthorized activity, including liability for any resulting > damages. As appropriate, such incident(s) may also be reported to law > enforcement. If you received this e-mail in error, please reply to sender and > destroy or delete the message and any attachments. Thank you. > > > > NOTICE: This e-mail message, including any attachments and appended > messages, is for the sole use of the intended recipients and may contain > confidential and legally privileged information. > If you are not the intended recipient, any review, dissemination, > distribution, copying, storage or other use of all or any portion of this > message is strictly prohibited. > If you received this message in error, please immediately notify the sender > by reply e-mail and delete this message in its entirety. > > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
