Venkat,
Since you are posting this to both the RACF and IBMMAIN List, it would be
better to continue this on RACF.
They will probably be more helpful.
Remember, we cannot logon to your shop, you need to show us all the details.
List the DEV1 user and all elements. List the BPX.UNIQUE.USER and
BPX.DEFAULT.USER completely and post.
At some point, you may need to open a case with IBM RACF to allow them to
help you resolve your issues. This is likely a configuration issue and we
may not be able to help like IBM RACF can.
>From the RACF Security Admin Guide R1V12,
If any of the following are true, default OMVS segment processing will not
occur:
The FACILITY class is inactive.
The FACILITY class profile BPX.UNIQUE.USER is defined.
The FACILITY class profile BPX.DEFAULT.USER does not exist.
There is no application data in the BPX.DEFAULT.USER profile.
The application data in the BPX.DEFAULT.USER profile does not contain
the name of an existing user profile, or the names of existing user and
group profiles.
When looking for a UID, the user profile found using the application
data does not contain an OMVS segment, or its OMVS segment does not contain
a UID.
When looking for a GID, the group profile found using the application
data does not contain an OMVS segment, or its OMVS segment does not contain
a GID.
The current user has no RACF user profile.
Lizette
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] On
> Behalf Of venkat kulkarni
> Sent: Sunday, February 16, 2014 7:25 PM
> To: [email protected]
> Subject: Re: RACF AIM Stage 3 Issue
>
> Hello,
> After following all steps required to setup BPX.UNIQUE.USER, I
asked my
> customer to run his Job and he again encountered OMVS segment issue as
below.
>
>
> N 4100000 DEVL 14045 11:38:12.51 STC01541 00000090 MIN0002I net
service
> DEV1 initialized. Version:1.2.1.7
> M 0080000 DEVL 14045 11:38:12.55 STC01541 00000281 ICH408I
> USER(DEV1
> ) GROUP(DEVGRP ) NAME(DEV1 ) 706
> D 706 00000281 CL(PROCESS )
> E 706 00000281 OMVS SEGMENT NOT
> DEFINED
> M 0020000 DEVL 14045 11:38:12.56 STC01541 00000281 IEA995I SYMPTOM
> DUMP
> OUTPUT 707
> D 707 00000281 SYSTEM COMPLETION
> CODE=EC6 REASON CODE=0F01C008
> D 707 00000281 TIME=11.38.12
> SEQ=00354 CPU=0000 ASID=003B
> D 707 00000281 PSW AT TIME OF
> ERROR 078C1000 83089A48 ILC 2 INTC 0D
> D 707 00000281 NO ACTIVE
MODULE
> FOUND
> D 707 00000281 NAME=UNKNOWN
> D 707 00000281 DATA AT PSW
> 03089A42 - C05018F8 0A0D5880 C0385810
> D 707 00000281 GR 0: 00000648
> 1: 84EC6000
> D 707 00000281 2: 0000009C
> 3: 0B0C00FB
> D 707 00000281 4: 9630034E
> 5: 00FD9840
> D 707 00000281 6: 01B65C18
> 7: 1630034E
> D 707 00000281 8: 0F01C008
> 9: 00FF24D0
> D 707 00000281 A: 0102D4A0
> B: 00000001
> D 707 00000281 C: 03089D10
> D: 163209B8
> D 707 00000281 E: 00000311
> F: 0F01C008
> E 707 00000281 END OF SYMPTOM
DUMP
> N 0000000 DEVL 14045 11:38:12.56 00000281 IEA989I SLIP TRAP
> ID=X13E MATCHED. JOBNAME=DEV1 , ASID=003B.
> N 0000000 DEVL 14045 11:38:12.56 00000281 IEA989I SLIP TRAP
> ID=X13E MATCHED. JOBNAME=DEV1 , ASID=003B.
> N 0000000 DEVL 14045 11:38:12.56 00000281 IEA989I SLIP TRAP
> ID=X13E MATCHED. JOBNAME=DEV1 , ASID=003B.
> M 0020000 DEVL 14045 11:38:12.59 STC01541 00000090 MIS0200I Address
> space for service DEV1 terminated 711
>
> Initially my RACF DB was at AIM stage 1 but as the steps to converting
> BPX.UNIQUE.USER, I converted AIM stage 1 to AIM stage 3.
>
> As I have mentioned earlier as well, that along with z/OS 2.1, we have
down level
> system(z/OS 1.13) as well sharing same RACF DB . Now after this
> BPX.UNIQUE.USER
>
> setup, when we tried starting Jobs, as I mentioned above getting same
error about
> OMVS segment not defined. But as IBM manual, as now we have both
> BPX.UNIQUE.USER and BPX.DEFAULT.USER setup in RACF, so z/OS 1.13
> should use BPX.DEFAULT.USER. But its not happening.
>
> Please suggest.
>
>
> On Mon, Feb 17, 2014 at 12:18 AM, Gibney, Dave <[email protected]> wrote:
>
> > Please provide exact error messages now that you are stage 3.
> >
> > > -----Original Message-----
> > > From: IBM Mainframe Discussion List
> > > [mailto:[email protected]] On Behalf Of venkat kulkarni
> > > Sent: Sunday, February 16, 2014 10:25 AM
> > > To: [email protected]
> > > Subject: Re: RACF AIM Stage 3 Issue
> > >
> > > Hello Group,
> > > any more clue to solve this issue.
> > >
> > >
> > >
> > >
> > > On Sat, Feb 15, 2014 at 8:32 AM, venkat kulkarni
> > > <[email protected]
> > > > wrote:
> > >
> > > >
> > > >
> > > >
> > > >
> > > > Yes, UNLOADED IRRUT400 worked for me and now RACF is at AIM
> > > > stage
> > > 3.
> > > >> As I mentioned earlier, we have we have z/OS 1.13 and z/OS 2.1
> > > >> system in sysplex. So, As per document upto z/OS 1.13, we can use
> > > >> BPX.DEFAULT.USER and then on z/OS 2.1, we will have to use
> > > BPX.UNIQUE.USER .
> > > >>
> > > >> But when I followed below link to setup BPX.UNIQUE.USER .
> > > >>
> > > >>
> > > >>
> > > http://pic.dhe.ibm.com/infocenter/zos/v1r12/index.jsp?topic=%2Fcom.i
> > > b
> > > >> m.zos.r12.icha700%2Fautosvc.htm
> > > >>
> > > >> still I am getting omvs segment issue while working with any
> > > >> user, who is trying to get into omvs segment.
> > > >>
> > > >> 1) See your system programmer to ensure that your RACF database
> > > >> is enabled for AIM stage 3
> > > >> 2) Define the SHARED.IDS profile, if not already defined, in the
> > > >> UNIXPRIV class and activate and RACLIST the UNIXPRIV class
> > > >> 3) Define the BPX.NEXT.USER profile in the FACILITY class, if not
> > > >> already defined. For instructions,
> > > >> 4) Define a user profile to use as a model profile from which
> > > >> RACF can extract OMVS segment information
> > > >>
> > > >> ADDUSER BPXMODEL NAME('OMVS model user profile')
> > > >> OMVS(NOUID HOME('/tmp'))
> > > >> NOPASSWORD RESTRICTED
> > > >>
> > > >> 5) Define the BPX.UNIQUE.USER profile in the FACILITY class and
> > > specify the name of the model profile in the APPLDATA field.
> > > >>
> > > >> RDEFINE FACILITY BPX.UNIQUE.USER APPLDATA('BPXMODEL')
> > > >>
> > > >> 6) If the FACILITY class is RACLISTed, activate your new FACILITY
> > > profiles by refreshing the FACILITY class.
> > > >>
> > > >> SETROPTS RACLIST(FACILITY) REFRESH
> > > >>
> > > >>
> > > >> Please suggest.
> > > >>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
