Hello,
I am pasting the Job log
10.53.23 JOB02673 IEW4000I FETCH FOR MODULE DFHEISUP FROM DDNAME STEPLIB
FAILED BECAUSE INSUFFICIENT STORAGE WAS AVAILABLE.
10.53.23 JOB02673 CSV031I LIBRARY ACCESS FAILED FOR MODULE DFHEISUP,
RETURN CODE 24, REASON CODE 26080021, DDNAME STEPLIB
10.53.23 JOB02673 CSV028I ABEND106-0C JOBNAME=UxxxxxxR STEPNAME=DFHSCAN
10.53.23 JOB02673 IEA995I SYMPTOM DUMP OUTPUT 502
502 SYSTEM COMPLETION CODE=106 REASON CODE=0000000C
502 TIME=10.53.23 SEQ=00242 CPU=0000 ASID=0037
502 PSW AT TIME OF ERROR 070C1000 81391A30 ILC 2 INTC
0D
502 NO ACTIVE MODULE FOUND
502 NAME=UNKNOWN
502 DATA AT PSW 01391A2A - 8400181E 0A0D18FB 180C181D
502 GR 0: 00001F00 1: 84106000
502 2: 26080021 3: 0000000C
502 4: 00000014 5: 006FF540
502 6: 7F4A6100 7: 0000000C
502 8: 7F4A6150 9: 01391F58
502 A: 00000024 B: 00000014
502 C: 00000000 D: 7F4A6150
502 E: 84106000 F: 0000000C
502 END OF SYMPTOM DUMP
10.53.23 JOB02673 IEF450I UxxxxxxR DFHSCAN - ABEND=S106 U0000
REASON=0000000C
10.53.23 JOB02673 -
-----TIMINGS (MINS.)------ -----PAGING
COUNTS----
10.53.23 JOB02673 -STEPNAME PROCSTEP RC EXCP CONN TCB
SRB CLOCK SERV WORKLOAD PAGE SWAP VIO SWAPS
10.53.23 JOB02673 -DFHSCAN *S106 18 15 .00
.00 .0 127 BATCH 0 0 0 0
10.53.23 JOB02673 -UxxxxxxR ENDED. NAME- TOTAL TCB
CPU TIME= .00 TOTAL ELAPSED TIME= .0
10.53.23 JOB02673 $HASP395 UxxxxxR ENDED
0------ JES2 JOB STATISTICS ------
- 13 FEB 2014 JOB EXECUTION DATE
- 54 CARDS READ
- 139 SYSOUT PRINT RECORDS
- 0 SYSOUT PUNCH RECORDS
- 9 SYSOUT SPOOL KBYTES
- 0.00 MINUTES EXECUTION TIME
1 //UxxxxxxR JOB
MSGCLASS=X,MSGLEVEL=(1,1),CLASS=T, JOB02673
// NOTIFY=&SYSUID
REGION=0M 00030000
IEFC653I SUBSTITUTION JCL -
MSGCLASS=X,MSGLEVEL=(1,1),CLASS=T,NOTIFY=U125861
2 //DFHSCAN EXEC PGM=DFHEISUP,PARM=('SUMMARY,
DETAILMODS'),REGION=0M
//*********************************************************************
//*
*
//* @BANNER_START@
01 *
//*
DFHEILMS *
//* Licensed Materials - Property of
IBM *
//*
*
//*
5655-S97 *
//*
*
//* (C) Copyright IBM Corp.
2001 *
//*
*
//*
*
//*
*
//*
*
//* @BANNER_END@
*
//*
*
//* STATUS =
6.7.0 *
//*
*
//* CHANGE ACTIVITY
: *
//*
*
//* $MOD(DFHEILMS),COMP(APPLICN),PROD(CICS TS
): *
//*
*
//* PN= REASON REL YYMMDD HDXXIII :
REMARKS *
//* $L0= Base 610 01 HD4PALS :
Base *
//*
*
//*********************************************************************
//*********************************************************************
//*
*
//* JCL NAME =
DFHEILMS *
//*
*
//* DESCRIPTIVE NAME = CICS Load Module
Scanner *
//* Sample JCL for running the Load
Module *
//*
Scanner *
//*
*
//* FUNCTION
= *
//*
*
//* Sample JCL for running the Load Module
Scanner *
//*
*
//* The file DSN qualifier &HLQ must be
changed. *
//*
*
//* The CICS Operations and Utilities Guide contains a
detailed *
//* description of the Load Module
Scanner *
//*
*
//*********************************************************************
3 //STEPLIB DD
DSN=CICSTS42.CICS.SDFHLOAD,DISP=SHR
4 //SYSPRINT DD
SYSOUT=*
5 //SYSERR DD
SYSOUT=*
6 //DFHFLTR DD
DSN=Uxxxxx.TESTLIB.JCL(DFHEIDBR),DISP=SHR
7 //DFHDTL DD
DSN=Uxxxxx.MODLIST,DISP=(NEW,CATLG,DELETE),
//
DCB=(RECFM=FB,LRECL=80,BLKSIZE=8000),SPACE=(CYL,(1,1))
8 //DFHLIST DD
DUMMY
9 //DFHIN DD
DSN=Lxxxxxx.CICS.LOAD,DISP=SHR
ICH70001I UXXXXXX LAST ACCESS AT 10:52:16 ON THURSDAY, FEBRUARY 13, 2014
IEF236I ALLOC. FOR UxxxxxxR DFHSCAN
IEF237I 1001 ALLOCATED TO STEPLIB
IEF237I JES2 ALLOCATED TO SYSPRINT
IEF237I JES2 ALLOCATED TO SYSERR
IGD103I SMS ALLOCATED TO DDNAME DFHFLTR
IGD101I SMS ALLOCATED TO DDNAME (DFHDTL )
DSN (Uxxxxxx.MODLIST )
STORCLAS (STANDARD) MGMTCLAS ( ) DATACLAS ( )
VOL SER NOS=
DTWK02
IEF237I DMY ALLOCATED TO DFHLIST
IGD103I SMS ALLOCATED TO DDNAME DFHIN
IEW4000I FETCH FOR MODULE DFHEISUP FROM DDNAME STEPLIB FAILED BECAUSE
INSUFFICIENT STORAGE WAS AVAILABLE.
CSV031I LIBRARY ACCESS FAILED FOR MODULE DFHEISUP, RETURN CODE 24, REASON
CODE 26080021, DDNAME STEPLIB
CSV028I ABEND106-0C JOBNAME=Uxxxxx1R STEPNAME=DFHSCAN
IEA995I SYMPTOM DUMP OUTPUT
SYSTEM COMPLETION CODE=106 REASON CODE=0000000C
TIME=10.53.23 SEQ=00242 CPU=0000 ASID=0037
PSW AT TIME OF ERROR 070C1000 81391A30 ILC 2 INTC 0D
NO ACTIVE MODULE FOUND
NAME=UNKNOWN
DATA AT PSW 01391A2A - 8400181E 0A0D18FB 180C181D
GR 0: 00001F00 1: 84106000
2: 26080021 3: 0000000C
4: 00000014 5: 006FF540
6: 7F4A6100 7: 0000000C
8: 7F4A6150 9: 01391F58
A: 00000024 B: 00000014
C: 00000000 D: 7F4A6150
E: 84106000 F: 0000000C
END OF SYMPTOM DUMP
IEF472I UxxxxxxR DFHSCAN - COMPLETION CODE - SYSTEM=106 USER=0000
REASON=0000000C
IEF285I CICSTS42.CICS.SDFHLOAD KEPT
IEF285I VOL SER NOS= DVX3A2.
IEF285I Uxxxxx.UxxxxxR.JOB02673.D0000101.? SYSOUT
IEF285I Uxxxxx.UxxxxxR.JOB02673.D0000102.? SYSOUT
IGD104I Uxxxxx.TESTLIB.JCL RETAINED,
DDNAME=DFHFLTR
IGD105I Uxxxxx.MODLIST DELETED,
DDNAME=DFHDTL
IGD104I Lxxxxx.CICS.LOAD RETAINED,
DDNAME=DFHIN
IEF373I STEP/DFHSCAN /START 2014044.1053
IEF032I STEP/DFHSCAN /STOP 2014044.1053
CPU: 0 HR 00 MIN 00.03 SEC SRB: 0 HR 00 MIN 00.00
SEC
VIRT: 4K SYS: 252K EXT: 0K SYS: 12104K
IEF375I JOB/UxxxxxxR/START 2014044.1053
IEF033I JOB/UxxxxxxR/STOP 2014044.1053
CPU: 0 HR 00 MIN 00.03 SEC SRB: 0 HR 00 MIN 00.00
SEC
On Thu, Feb 20, 2014 at 3:15 PM, Lizette Koehler <[email protected]>wrote:
> You can check your jesmsglog for information on what was used by your
> application. I am guessing you are trying to run the DFHEISUP utility in
> CICS.
>
> You should see a message similar to this one:
> IEF374I STEP/CACCATIN/STOP 2007323.0942 CPU 0MIN 00.69SEC
> SRB 0MIN 00.18 VIRT 128K SYS 368K EXT 32720K SYS 10348K
>
> This is what the message IEF374I means
>
> IEF374I
> STEP/stepname/STOP yyyyddd.hhmm
> CPU xxxx MIN xx.xx SEC
> SRB xxxx MIN xx.xx SEC
> REAL/VIRT xxxxK SYS xxxxK
> EXT xxxxK SYS xxxxK
>
> Explanation:
>
> At step ending, system management facilities (SMF) issues this message to
> give information about the step.
>
> In the message text:
>
> yyyyddd.hhmm The date and time given as the year (using the 4-digit
> year number, such as 1996 or 2150), and the day of the year (001-366), the
> hour (00-23), and the minute (00-59).
>
> CPU xxxx MIN xx.xx SEC For processor time, which includes enclave
> time, preemptive class SRB time, client SRB time, and normalized IFA
> service
> time,xxxx MIN specifies the minute and xx.xx SEC specifies the second (in
> seconds and hundredths of a second).
>
> SRB xxxx MIN xx.xx SEC For system request time, xxxx MIN specifies
> the minute and xx.xx SEC specifies the second (in seconds and hundredths of
> a second).
>
> Stepname The name of the job step.
>
> REAL/VIRT xxxxK SYS xxxxK REAL/VIRT xxxxK indicates the maximum
> kilobytes of storage (high-water mark) that a step used from the user
> region
> of the private area. SYS xxxxK indicates the maximum kilobytes of storage
> (high-water mark) that the address space used from the following areas:
> LSQA, SWA, and high private area. The word REAL appears if ADDRSPC=REAL was
> specified; otherwise, VIRT appears.
>
> EXT xxxxK SYS xxxxK EXT xxxxK indicates the maximum
> kilobytes of storage (high-water mark) that a step used from the user
> region
> of the extended private area. SYS xxxxK indicates the maximum kilobytes of
> storage (high-water mark) that the address space used from the following
> areas: extended LSQA, extended SWA, and extended high private area.
>
>
>
>
> In the CICS Transaction Server for z/OS Version 4 Release 2 Operations and
> Utilities Guide
>
>
> Ensure that your region size is appropriate for the number of load
> modules that you want to scan. Do not specify REGION=0M. See Points to bear
> in mind when using the load module scanner for more information.
>
> So REGION=0M is not to be used.
>
> How many modules were you trying to scan? This may be normal behavior.
> Try
> reducing the number of modules to scan and see what happens.
>
> Next, you need to know how much below the line storage your system has.
> You
> may be able to map that with IPCS.
>
> I am not sure that MSUs are relevant. I would think configured storage on
> your LPAR (D M command) would be more helpful.
>
>
>
> Lizette
>
>
> > -----Original Message-----
> > From: IBM Mainframe Discussion List [mailto:[email protected]] On
> > Behalf Of Jake anderson
> > Sent: Thursday, February 20, 2014 2:10 AM
> > To: [email protected]
> > Subject: Below the Line Storage Allocation
> >
> > Hello,
> >
> > Cross posted to CICS as well
> >
> > I am running a CICS load module scanner job where it fails with the below
> message
> >
> > 10.53.23 JOB02673 IEA995I SYMPTOM DUMP OUTPUT 502
> > 502 SYSTEM COMPLETION CODE=106 REASON CODE=0000000C
> > 502 TIME=10.53.23 SEQ=00242 CPU=0000 ASID=0037
> > 502 PSW AT TIME OF ERROR 070C1000 81391A30 ILC 2
> INTC
> > 0D
> > 502 NO ACTIVE MODULE FOUND
> > 502 NAME=UNKNOWN
> > 502 DATA AT PSW 01391A2A - 8400181E 0A0D18FB
> 180C181D
> > 502 GR 0: 00001F00 1: 84106000
> > 502 2: 26080021 3: 0000000C
> > 502 4: 00000014 5: 006FF540
> > 502 6: 7F4A6100 7: 0000000C
> > 502 8: 7F4A6150 9: 01391F58
> > 502 A: 00000024 B: 00000014
> > 502 C: 00000000 D: 7F4A6150
> > 502 E: 84106000 F: 0000000C
> > 502 END OF SYMPTOM DUMP
> >
> > I understand that the Job does not have the enough storage below the
> Line.
> > I tried running the Job with
> > REGION=512M,REGION=256M,REGION=8M,REGION=0M
> > but still the Job does not get the storage below Line.
> >
> > Is there a way to identify the correct storage mapping for a particular
> batch job
> > which has to execute within 16MB. The program is pretty big and has
> 24(RM).
> >
> > I am still not able to find any clue about the exact storage which would
> be required
> > for this Job to run.
> >
> > Any pointers are highly appreciated.
> >
> > Z/OS 1.13 capped at 13MSU
> >
> > Jake
> >
>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
