Worried about your terminology here. Please show us the report. In most interpretations of what you said about the 6796K number it looks like a very small 24-Bit Private is available to you.
Cheers, Martin Martin Packer, zChampion, Principal Systems Investigator, Worldwide Banking Center of Excellence, IBM +44-7802-245-584 email: martin_pac...@uk.ibm.com Twitter / Facebook IDs: MartinPacker Blog: https://www.ibm.com/developerworks/mydeveloperworks/blogs/MartinPacker From: Jake anderson <justmainfra...@gmail.com> To: IBM-MAIN@listserv.ua.edu Date: 20/02/2014 10:35 Subject: Re: Below the Line Storage Allocation Sent by: IBM Mainframe Discussion List <IBM-MAIN@listserv.ua.edu> Using RMF, I see unalloc common area : 6796K, So looks like I have storage close to 6MB. On Thu, Feb 20, 2014 at 3:40 PM, Jake anderson <justmainfra...@gmail.com>wrote: > Hello, > > I am pasting the Job log > > 10.53.23 JOB02673 IEW4000I FETCH FOR MODULE DFHEISUP FROM DDNAME STEPLIB > FAILED BECAUSE INSUFFICIENT STORAGE WAS AVAILABLE. > 10.53.23 JOB02673 CSV031I LIBRARY ACCESS FAILED FOR MODULE DFHEISUP, > RETURN CODE 24, REASON CODE 26080021, DDNAME STEPLIB > 10.53.23 JOB02673 CSV028I ABEND106-0C JOBNAME=UxxxxxxR STEPNAME=DFHSCAN > > 10.53.23 JOB02673 IEA995I SYMPTOM DUMP OUTPUT 502 > 502 SYSTEM COMPLETION CODE=106 REASON CODE=0000000C > 502 TIME=10.53.23 SEQ=00242 CPU=0000 ASID=0037 > 502 PSW AT TIME OF ERROR 070C1000 81391A30 ILC 2 > INTC 0D > 502 NO ACTIVE MODULE FOUND > 502 NAME=UNKNOWN > 502 DATA AT PSW 01391A2A - 8400181E 0A0D18FB 180C181D > 502 GR 0: 00001F00 1: 84106000 > 502 2: 26080021 3: 0000000C > 502 4: 00000014 5: 006FF540 > 502 6: 7F4A6100 7: 0000000C > 502 8: 7F4A6150 9: 01391F58 > 502 A: 00000024 B: 00000014 > 502 C: 00000000 D: 7F4A6150 > 502 E: 84106000 F: 0000000C > 502 END OF SYMPTOM DUMP > 10.53.23 JOB02673 IEF450I UxxxxxxR DFHSCAN - ABEND=S106 U0000 > REASON=0000000C > 10.53.23 JOB02673 - > -----TIMINGS (MINS.)------ -----PAGING > COUNTS---- > 10.53.23 JOB02673 -STEPNAME PROCSTEP RC EXCP CONN TCB > SRB CLOCK SERV WORKLOAD PAGE SWAP VIO SWAPS > 10.53.23 JOB02673 -DFHSCAN *S106 18 15 .00 > .00 .0 127 BATCH 0 0 0 0 > 10.53.23 JOB02673 -UxxxxxxR ENDED. NAME- TOTAL TCB > CPU TIME= .00 TOTAL ELAPSED TIME= .0 > 10.53.23 JOB02673 $HASP395 UxxxxxR ENDED > 0------ JES2 JOB STATISTICS ------ > - 13 FEB 2014 JOB EXECUTION DATE > - 54 CARDS READ > - 139 SYSOUT PRINT RECORDS > - 0 SYSOUT PUNCH RECORDS > - 9 SYSOUT SPOOL KBYTES > - 0.00 MINUTES EXECUTION TIME > 1 //UxxxxxxR JOB > MSGCLASS=X,MSGLEVEL=(1,1),CLASS=T, JOB02673 > // NOTIFY=&SYSUID > REGION=0M 00030000 > IEFC653I SUBSTITUTION JCL - > MSGCLASS=X,MSGLEVEL=(1,1),CLASS=T,NOTIFY=U125861 > 2 //DFHSCAN EXEC PGM=DFHEISUP,PARM=('SUMMARY, > DETAILMODS'),REGION=0M > > //********************************************************************* > > > //* > * > //* @BANNER_START@ > 01 * > //* > DFHEILMS * > //* Licensed Materials - Property of > IBM * > > //* > * > //* > 5655-S97 * > > //* > * > //* (C) Copyright IBM Corp. > 2001 * > > //* > * > > //* > * > > //* > * > > //* > * > //* @BANNER_END@ > * > > //* > * > //* STATUS = > 6.7.0 * > > //* > * > //* CHANGE ACTIVITY > : * > > //* > * > //* $MOD(DFHEILMS),COMP(APPLICN),PROD(CICS TS > ): * > > //* > * > //* PN= REASON REL YYMMDD HDXXIII : > REMARKS * > //* $L0= Base 610 01 HD4PALS : > Base * > > //* > * > > //********************************************************************* > > > //********************************************************************* > > > //* > * > //* JCL NAME = > DFHEILMS * > > //* > * > //* DESCRIPTIVE NAME = CICS Load Module > Scanner * > //* Sample JCL for running the Load > Module * > //* > Scanner * > > //* > * > //* FUNCTION > = * > > //* > * > //* Sample JCL for running the Load Module > Scanner * > > //* > * > //* The file DSN qualifier &HLQ must be > changed. * > > //* > * > //* The CICS Operations and Utilities Guide contains a > detailed * > //* description of the Load Module > Scanner * > > //* > * > > //********************************************************************* > > 3 //STEPLIB DD > DSN=CICSTS42.CICS.SDFHLOAD,DISP=SHR > 4 //SYSPRINT DD > SYSOUT=* > 5 //SYSERR DD > SYSOUT=* > 6 //DFHFLTR DD > DSN=Uxxxxx.TESTLIB.JCL(DFHEIDBR),DISP=SHR > 7 //DFHDTL DD > DSN=Uxxxxx.MODLIST,DISP=(NEW,CATLG,DELETE), > // > DCB=(RECFM=FB,LRECL=80,BLKSIZE=8000),SPACE=(CYL,(1,1)) > 8 //DFHLIST DD > DUMMY > 9 //DFHIN DD > DSN=Lxxxxxx.CICS.LOAD,DISP=SHR > ICH70001I UXXXXXX LAST ACCESS AT 10:52:16 ON THURSDAY, FEBRUARY 13, 2014 > IEF236I ALLOC. FOR UxxxxxxR DFHSCAN > IEF237I 1001 ALLOCATED TO STEPLIB > IEF237I JES2 ALLOCATED TO SYSPRINT > IEF237I JES2 ALLOCATED TO SYSERR > IGD103I SMS ALLOCATED TO DDNAME DFHFLTR > IGD101I SMS ALLOCATED TO DDNAME (DFHDTL ) > DSN (Uxxxxxx.MODLIST ) > STORCLAS (STANDARD) MGMTCLAS ( ) DATACLAS ( ) > VOL SER NOS= > DTWK02 > IEF237I DMY ALLOCATED TO DFHLIST > IGD103I SMS ALLOCATED TO DDNAME DFHIN > IEW4000I FETCH FOR MODULE DFHEISUP FROM DDNAME STEPLIB FAILED BECAUSE > INSUFFICIENT STORAGE WAS AVAILABLE. > CSV031I LIBRARY ACCESS FAILED FOR MODULE DFHEISUP, RETURN CODE 24, REASON > CODE 26080021, DDNAME STEPLIB > CSV028I ABEND106-0C JOBNAME=Uxxxxx1R STEPNAME=DFHSCAN > IEA995I SYMPTOM DUMP OUTPUT > > SYSTEM COMPLETION CODE=106 REASON CODE=0000000C > TIME=10.53.23 SEQ=00242 CPU=0000 ASID=0037 > > PSW AT TIME OF ERROR 070C1000 81391A30 ILC 2 INTC 0D > NO ACTIVE MODULE FOUND > NAME=UNKNOWN > > DATA AT PSW 01391A2A - 8400181E 0A0D18FB 180C181D > GR 0: 00001F00 1: 84106000 > 2: 26080021 3: 0000000C > 4: 00000014 5: 006FF540 > 6: 7F4A6100 7: 0000000C > 8: 7F4A6150 9: 01391F58 > A: 00000024 B: 00000014 > C: 00000000 D: 7F4A6150 > E: 84106000 F: 0000000C > END OF SYMPTOM DUMP > IEF472I UxxxxxxR DFHSCAN - COMPLETION CODE - SYSTEM=106 USER=0000 > REASON=0000000C > IEF285I CICSTS42.CICS.SDFHLOAD KEPT > IEF285I VOL SER NOS= DVX3A2. > IEF285I Uxxxxx.UxxxxxR.JOB02673.D0000101.? SYSOUT > IEF285I Uxxxxx.UxxxxxR.JOB02673.D0000102.? SYSOUT > IGD104I Uxxxxx.TESTLIB.JCL RETAINED, > DDNAME=DFHFLTR > IGD105I Uxxxxx.MODLIST DELETED, > DDNAME=DFHDTL > IGD104I Lxxxxx.CICS.LOAD RETAINED, > DDNAME=DFHIN > IEF373I STEP/DFHSCAN /START 2014044.1053 > IEF032I STEP/DFHSCAN /STOP 2014044.1053 > CPU: 0 HR 00 MIN 00.03 SEC SRB: 0 HR 00 MIN 00.00 > SEC > VIRT: 4K SYS: 252K EXT: 0K SYS: 12104K > IEF375I JOB/UxxxxxxR/START 2014044.1053 > IEF033I JOB/UxxxxxxR/STOP 2014044.1053 > CPU: 0 HR 00 MIN 00.03 SEC SRB: 0 HR 00 MIN 00.00 > SEC > > > > On Thu, Feb 20, 2014 at 3:15 PM, Lizette Koehler <stars...@mindspring.com>wrote: > >> You can check your jesmsglog for information on what was used by your >> application. I am guessing you are trying to run the DFHEISUP utility in >> CICS. >> >> You should see a message similar to this one: >> IEF374I STEP/CACCATIN/STOP 2007323.0942 CPU 0MIN 00.69SEC >> SRB 0MIN 00.18 VIRT 128K SYS 368K EXT 32720K SYS 10348K >> >> This is what the message IEF374I means >> >> IEF374I >> STEP/stepname/STOP yyyyddd.hhmm >> CPU xxxx MIN xx.xx SEC >> SRB xxxx MIN xx.xx SEC >> REAL/VIRT xxxxK SYS xxxxK >> EXT xxxxK SYS xxxxK >> >> Explanation: >> >> At step ending, system management facilities (SMF) issues this message to >> give information about the step. >> >> In the message text: >> >> yyyyddd.hhmm The date and time given as the year (using the >> 4-digit >> year number, such as 1996 or 2150), and the day of the year (001-366), the >> hour (00-23), and the minute (00-59). >> >> CPU xxxx MIN xx.xx SEC For processor time, which includes enclave >> time, preemptive class SRB time, client SRB time, and normalized IFA >> service >> time,xxxx MIN specifies the minute and xx.xx SEC specifies the second (in >> seconds and hundredths of a second). >> >> SRB xxxx MIN xx.xx SEC For system request time, xxxx MIN specifies >> the minute and xx.xx SEC specifies the second (in seconds and hundredths >> of >> a second). >> >> Stepname The name of the job step. >> >> REAL/VIRT xxxxK SYS xxxxK REAL/VIRT xxxxK indicates the maximum >> kilobytes of storage (high-water mark) that a step used from the user >> region >> of the private area. SYS xxxxK indicates the maximum kilobytes of storage >> (high-water mark) that the address space used from the following areas: >> LSQA, SWA, and high private area. The word REAL appears if ADDRSPC=REAL >> was >> specified; otherwise, VIRT appears. >> >> EXT xxxxK SYS xxxxK EXT xxxxK indicates the maximum >> kilobytes of storage (high-water mark) that a step used from the user >> region >> of the extended private area. SYS xxxxK indicates the maximum kilobytes of >> storage (high-water mark) that the address space used from the following >> areas: extended LSQA, extended SWA, and extended high private area. >> >> >> >> >> In the CICS Transaction Server for z/OS Version 4 Release 2 Operations and >> Utilities Guide >> >> >> Ensure that your region size is appropriate for the number of load >> modules that you want to scan. Do not specify REGION=0M. See Points to >> bear >> in mind when using the load module scanner for more information. >> >> So REGION=0M is not to be used. >> >> How many modules were you trying to scan? This may be normal behavior. >> Try >> reducing the number of modules to scan and see what happens. >> >> Next, you need to know how much below the line storage your system has. >> You >> may be able to map that with IPCS. >> >> I am not sure that MSUs are relevant. I would think configured storage on >> your LPAR (D M command) would be more helpful. >> >> >> >> Lizette >> >> >> > -----Original Message----- >> > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] >> On >> > Behalf Of Jake anderson >> > Sent: Thursday, February 20, 2014 2:10 AM >> > To: IBM-MAIN@LISTSERV.UA.EDU >> > Subject: Below the Line Storage Allocation >> > >> > Hello, >> > >> > Cross posted to CICS as well >> > >> > I am running a CICS load module scanner job where it fails with the >> below >> message >> > >> > 10.53.23 JOB02673 IEA995I SYMPTOM DUMP OUTPUT 502 >> > 502 SYSTEM COMPLETION CODE=106 REASON CODE=0000000C >> > 502 TIME=10.53.23 SEQ=00242 CPU=0000 ASID=0037 >> > 502 PSW AT TIME OF ERROR 070C1000 81391A30 ILC 2 >> INTC >> > 0D >> > 502 NO ACTIVE MODULE FOUND >> > 502 NAME=UNKNOWN >> > 502 DATA AT PSW 01391A2A - 8400181E 0A0D18FB >> 180C181D >> > 502 GR 0: 00001F00 1: 84106000 >> > 502 2: 26080021 3: 0000000C >> > 502 4: 00000014 5: 006FF540 >> > 502 6: 7F4A6100 7: 0000000C >> > 502 8: 7F4A6150 9: 01391F58 >> > 502 A: 00000024 B: 00000014 >> > 502 C: 00000000 D: 7F4A6150 >> > 502 E: 84106000 F: 0000000C >> > 502 END OF SYMPTOM DUMP >> > >> > I understand that the Job does not have the enough storage below the >> Line. >> > I tried running the Job with >> > REGION=512M,REGION=256M,REGION=8M,REGION=0M >> > but still the Job does not get the storage below Line. >> > >> > Is there a way to identify the correct storage mapping for a particular >> batch job >> > which has to execute within 16MB. The program is pretty big and has >> 24(RM). >> > >> > I am still not able to find any clue about the exact storage which would >> be required >> > for this Job to run. >> > >> > Any pointers are highly appreciated. >> > >> > Z/OS 1.13 capped at 13MSU >> > >> > Jake >> > >> > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN