Thanks!

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf 
Of Mike Schwab
Sent: Tuesday, August 05, 2014 4:09 PM
To: [email protected]
Subject: Re: Initialization problem in Storage Group

Volumes named but not created appear on the list but all values are blank.

On Tue, Aug 5, 2014 at 1:52 PM, Pommier, Rex <[email protected]> wrote:
> Neil,
>
> What does the StorGrp display look like in ISMF when you have the 
> non-existent volumes in the SG?  Do they show up on the CDS-name display but 
> not on the ACTIVE display?
>
> Rex
>
>
> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[email protected]] On 
> Behalf Of Neil Duffee
> Sent: Tuesday, August 05, 2014 1:33 PM
> To: [email protected]
> Subject: Re: Initialization problem in Storage Group
>
> CDS Name 'ACTIVE' in ISMF panel DGTSCSG1 STORAGE GROUP APPLICATION SELECTION? 
>  Otherwise, you get the information stored in the CDS not the actual system 
> state that you'd also get from DISPLAY SMS,VOLUME(FC1800).
>
> ps.  I discovered you can DISPLAY SMS,VOLUME() on a non-existent volume that 
> is defined to a StorGrp.  For example, I routinely over-define more volumes 
> in a StorGrp than are initialized so I can increase the pool without 
> activating a new configuration ie. DB2000-DB2080 when only 30 volumes exist.  
> When I INIT VOL(DB2031) STORAGEGROUP, it's automagically in the pool with no 
> further SMS work.
>
> -------->  signature = 6 lines follows  <--------
> Neil Duffee, Joe Sysprog, uOttawa, Ottawa, Ont, Canada
> telephone:1 613 562 5800 x4585                  fax:1 613 562 5161
> mailto:NDuffee of uOttawa.ca     http:/ /aix1.uOttawa.ca/ ~nduffee
> “How *do* you plan for something like that?”  Guardian Bob, Reboot
> “For every action, there is an equal and opposite criticism.”
> “Systems Programming: Guilty, until proven innocent”  John Norgauer 2004
>
> -----Original Message-----
> From: Rajesh Janakiraman [mailto:[email protected]]
> Sent: August 4, 2014 13:29
> Subject: Re: Initialization problem in Storage Group
>
> All the volumes are displayed in pool.  [snip]
>
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN
>
> The information contained in this message is confidential, protected from 
> disclosure and may be legally privileged.  If the reader of this message is 
> not the intended recipient or an employee or agent responsible for delivering 
> this message to the intended recipient, you are hereby notified that any 
> disclosure, distribution, copying, or any action taken or action omitted in 
> reliance on it, is strictly prohibited and may be unlawful.  If you have 
> received this communication in error, please notify us immediately by 
> replying to this message and destroy the material in its entirety, whether in 
> electronic or hard copy format.  Thank you.
>
>
> ----------------------------------------------------------------------
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO IBM-MAIN



-- 
Mike A Schwab, Springfield IL USA
Where do Forest Rangers go to get away from it all?

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

The information contained in this message is confidential, protected from 
disclosure and may be legally privileged.  If the reader of this message is not 
the intended recipient or an employee or agent responsible for delivering this 
message to the intended recipient, you are hereby notified that any disclosure, 
distribution, copying, or any action taken or action omitted in reliance on it, 
is strictly prohibited and may be unlawful.  If you have received this 
communication in error, please notify us immediately by replying to this 
message and destroy the material in its entirety, whether in electronic or hard 
copy format.  Thank you.


----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN

Reply via email to