On 12/4/2016 8:27 PM, Crabtree, Anne D wrote:
Here's what OAM is telling me
CBR0001I OAM initialization starting.
CBR0119I Entry default data class for library WVCHAS not available.
CBR0119I Entry default data class for library WVFLAT not available.
CBR3006I Library WVCHAS with Library ID D7720 unknown in I/O configuration.
CBR3002E Library WVCHAS no longer usable.
CBR3006I Library WVFLAT with Library ID D7740 unknown in I/O configuration.
CBR3002E Library WVFLAT no longer usable.
CBR3006I Library WV7700 with Library ID C0001 unknown in I/O configuration.
CBR3002E Library WV7700 no longer usable.
CBR3911I There is no online and operational tape library.
h
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf
Of Lizette Koehler
Sent: Sunday, December 04, 2016 8:15 PM
To: [email protected]
Subject: Re: 3957-VEA TS7720 power outage
I was wondering when you bring it online, what error messages do you see?
There should be some IOS or IEA type messages for the VTS to say whether or not z/OS is
"seeing" it or not.
I do not know about the TS7720 to provide some other options.
But when our OEM VTS has issues, there is a log on the OEM equipment I can look
at and the SYSLOG usually has some messages as well.
Sometimes Ficon gets confused. Varying offline/online sometimes help - but I
am not sure if UCBs or the whole Library needs to come offline/online for your
situation.
Lizette
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]]
On Behalf Of Crabtree, Anne D
Sent: Sunday, December 04, 2016 5:58 PM
To: [email protected]
Subject: 3957-VEA TS7720 power outage
Looking for anyone who know something about a TS7720 to help me! This
machine Is in a hybrid configuration and we had a planned power outage this
morning.
I placed the cluster in service mode and then did a cluster shutdown.
When power was restored, our zBC12 cannot talk to the VTL! We've
tried everything, Hoping someone out there can help. Again, this is a
3957-VEA TS7720 (1.7 release).Our mainframe is a zBC12 and is
physically connected via ficon to this VTL. If this is not enough
information, let me know... I'll do my best to describe the situation.
We do not have a contract with IBM in place at this time and having
been working with hardware support and software support trying to receive help.
In the meantime, any input would be appreciated!
Anne,
The most likely scenario is that the library ID on the library itself
was reset to a default value. You need to set the library id's to
D7720, D7740, and C0001. The book says that you need a CE to do it, but
you say you don't have a service contract. I'm thinking there should be
a way to set the library id through the library management console.
Regards,
Tom Conley
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
