I just tested ZZSA under Hercules and like I thought, when you connect
via Hercules TN3270 to simulate a console, after IPL no ZZSA messages
appear until you press Enter. That means ZZSA sits waiting for an
interrupt from a 3270 device, and uses that device for the rest of the
communication. To me, that means it works just like SADUMP, DFDSS, and
ICKDSF and there is no console configuration.
On 10/5/2018 8:20 AM, Dyck, Lionel B. (RavenTek) wrote:
I've tested ZZSA under Hercules - Thanks to Sam Golob's fine work - but I
didn't see how to define a console as an HMC integretated console (hmcs) ?
--------------------------------------------------------------------------
Lionel B. Dyck (Contractor) <sdg><
Mainframe Systems Programmer – RavenTek Solution Partners
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf
Of Tom Brennan
Sent: Friday, October 05, 2018 10:14 AM
To: [email protected]
Subject: [EXTERNAL] Re: ZZSA question
Oh... you mean HMC console. New answer: I did not try that, but prior to
going to that site I had never user ZZSA before so I tested it under Hercules,
and that simulates the HMC console I believe, so I'd bet the answer is yes.
On 10/5/2018 8:07 AM, Tom Brennan wrote:
I used (well mostly watched) ZZSA work via ICC with no problems. That
was a couple of years ago on a new z13s with OSA 5S cards.
On 10/5/2018 4:58 AM, Dyck, Lionel B. (RavenTek) wrote:
Does anyone know if the ZZSA tool (stand alone utilities) on the
CBTTape can use the HMC Integrated Console?
---------------------------------------------------------------------
-----
Lionel B. Dyck (Contractor) <sdg><
Mainframe Systems Programmer - RavenTek Solution Partners
---------------------------------------------------------------------
- For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO
IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send
email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to
[email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO IBM-MAIN
