Thanks Joe, even just the distance that the bracket extends from the boat would be great.
Cheers, Mike ----- Original Message ----- From: Joe McCary To: [email protected] Sent: Monday, March 29, 2010 10:38 PM Subject: RE: [IC27A] Outboard motor mount backing plate I will be down at the boat this weekend and I will see if I can measure it. The problem is it is in the water and not real easy to reach.. Joe McCary Aeolus II. #4795, West River, MD www.aeoluswestriver.net joe at photoresponse dot com From: [email protected] [mailto:[email protected]] On Behalf Of Michael Bowick Sent: Tuesday, March 30, 2010 12:30 AM To: [email protected] Subject: Re: [IC27A] Outboard motor mount backing plate I would love to get the dimensions of you bracket. I'm about to mount a 9.9 Honda on my C27 and will have the exact same problem. Your solution looks like the best. Thanks, Mike ----- Original Message ----- From: Joe McCary To: [email protected] Sent: Monday, March 29, 2010 10:37 AM Subject: RE: [IC27A] Outboard motor mount backing plate My boat came with a Honda 9.9 too large for the "hole" so the PO had a custom bracket made to mount the engine at exactly the same height above the water just about 14"-16" further aft. It works well and was very strong but puts the tilt controls our of reach, I have rigged 2 lines; one to lull to unlock so the engine can be lowered and one to unlock to raise the engine. There is also a block and tackle to raise the engine out of the water and to lower it. My image folder on the website has a picture if you are interested., Joe McCary Aeolus II. #4795, West River, MD www.aeoluswestriver.net joe at photoresponse dot com From: [email protected] [mailto:[email protected]] On Behalf Of Jim Sent: Monday, March 29, 2010 1:06 PM To: [email protected] Subject: [IC27A] Outboard motor mount backing plate Hello, I recently purchased a new Suzuki 9.9 to mount on the back of my Catalina 27. It is a very heavy engine about 150lbs. I was wondering if it would be reccomended to have a stainless steel backing plate made or if I will be ok to use a thick piece of wood as the backing plate for the motor mount? Thank you in advance, James Lawhun __________ Information from ESET NOD32 Antivirus, version of virus signature database 4982 (20100329) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 4982 (20100329) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com ---------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.437 / Virus Database: 271.1.1/2775 - Release Date: 03/28/10 06:32:00 __________ Information from ESET NOD32 Antivirus, version of virus signature database 4983 (20100329) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 4983 (20100329) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 4983 (20100329) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.437 / Virus Database: 271.1.1/2775 - Release Date: 03/28/10 06:32:00
