I will try to scan tomorrow, and download then try and post. I will be traveling so I might get it done between flights. I would go down to the boat and measure, but the yard was closed this evening.
--- In [email protected], "Matthew" <chach...@...> wrote: > > Thanks for responding, Joe!. > > I don't have anything in my owners manual on this --- actually, I'm rather > impressed that the '85 C27 has an owner's manual that reaches to at least 53 > pages, since the one that came with my '77 is a skimpy little thing, similar > to the one that is posted the group's file section. Maybe you (or some other > member with the larger manual and access to a scanner) could post it on the > site? > > If anyone does have the rigging set up on theirs and can fill in the rest of > the details on sizing, capacity, etc., would be much obliged! > > Thanks again in advance for any help. > Matthew Chachère > "Bochinche" #3352 > Brooklyn / Sag Harbor NY > > > --- In [email protected], "joel5876" <joel5876@> wrote: > > > > Check page 53 of the owners manual (at least for my 85) Forguy on a > > standing swivel appears to be about 2/3 the distance between the cowl vent > > and the forward hatch. > > > > --- In [email protected], "Matthew" <chachere@> wrote: > > > > > > Hi all. My first post here. > > > > > > When I bought my C27 standard rig last summer, it came with a spinnaker > > > and a fragment or two of the associated rigging for it, but nowhere near > > > complete. Apparently, one of the POs had removed everything, then a > > > subsequent PO had begun restoring it, but never finished. > > > > > > I've reinstalled most of what's needed, but the missing link at this > > > point seems to be the foreguy rigging. Actually, there are fairleads > > > for the foreguy on the side of the doghouse and a camcleat, so the only > > > thing missing seems to be the swivel block on the foredeck. > > > > > > So, my query for those of you with spinnakers: > > > > > > 1) What size/capacity swivel block do you use for your foreguy? > > > 2) Where exactly is the foreguy swivel block located (a measurement > > > forward or back from some common point would help)? > > > 3) What size line do you use for your foreguy? > > > > > > Thanks in advance for any help. > > > Matthew Chachère > > > "Bochinche" #3352 > > > Brooklyn / Sag Harbor NY > > > > > >
