-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Tried wvdialconf create and my modem was detected. Followed your instructions on minicom, and typed AT in terminal says OK. But: 1> Can't dial atdt172226 from minicom. Says no dial tone.
2> I can't expect my dad to drop to the shell and execute wvdial. But there seems to be no frontends installed. Any pointers on the rpms to be installed ? 3> Dad was used to the kppp. It's also installed. Any pointers on additional config for pppd ? 4> Sorry, too new to Linux to be able to create symlink on my own. Plz. if possible, send the commands > Fire up minicom in setup mode (minicom -s) > Change the serial port to /dev/ttyS1 > Save changes as df1 > Exit > Then the minicom terminal, type in AT > If you get a AT - all's well > -sdg- > > PS: also, make a symlink called /dev/modem to /dev/ttyS1 and, > try out wvdialconf > > > -- > Sayamindu Dasgupta [ http://www.peacefulaction.org/sayamindu/ ] > Soumyadip Modak RCC Institute of Information Technology Kolkata, India -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 7.0.3 for non-commercial use <http://www.pgp.com> iQA/AwUBPksIXQAMO//EcNNiEQKmagCguVyAsEvAKkchpnM/AigKKTPJZqoAoORq HbNARlasbTcUE8xp0fEaBZ2p =keZ5 -----END PGP SIGNATURE----- -- To unsubscribe, send mail to [EMAIL PROTECTED] with the body "unsubscribe ilug-cal" and an empty subject line. FAQ: http://www.ilug-cal.org/node.php?id=3
