Hi all, I�m working on a friend�s Strawberry slot loading iMac. At least I�m trying to. I took all four screws out of the bottom housing and the rear of the housing comes off fine, but the front of it will not budge. The computer is in pristine condition, so I�m hesitant to pry at the seams with a screwdriver. I have a service manual for the computer and I know there aren�t any screws I�m missing. Is there anyone who�s had a similar problem? � By the way I�m taking it apart to troubleshoot the computer shutting itself down and starting itself up. I was going to start with looking at the switch and the connection to the motherboard, but as long as I�m here I�m open to suggestions. � Bill �
-- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
