i'm sure there are instructions, but you hardly need them. the bottom comes off the same way that the bottom cover comes off. four screws come out, and it pops off.
two things to consider: - you will need thermal paste to put it back together. - you will need a torque torx-15 that tightens to 17in-lbs.
if you don't already have that wrench, it may be cheaper or easier to pay someone do it for you.
I don't have a flat panel iMac and I have to laugh when I think about Small Dog guiding through replacing the bad RAM in my Flower Power...I was sure I'd hurt it!
But that said...thermal paste? Removing the screws breaks a glued seal or something like that?
-- The iMac List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
