on 8/20/03 9:20 AM, Dennis B. Swaney at [EMAIL PROTECTED] wrote: > IIRC, the Rev A & B came with a 233 MHz board, the Rev C with 266 > MHz, and the Rev C with 333 MHz. So what you really seem to be asking > is whether or not you can use Rev C/D logic boards in Rev A/B > machines. (My Rev B had 233 MHz until I replaced it with a HARMONi.) > I THINK this has been answered before in the negative, but I could be > mistaken. Check the archives.
Yes, that is what I've been asking all along, and received initial replies to the affirmative. This contradicted what the folks at Smalldog told me and I pointed that out to which others on this list responded that they didn't know what they were talking about. I'll check the archives. Charles -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
