An easy thing to try might be using another browser, like Firefox or Opera. One thing to try to be sure would be to telnet to the server.
run command: telnet 10.254.1.238 8383
type into telnet:
GET / HTTP/1.1[enter]
HOST: 10.254.1.238[enter]
[enter]The server will then spit out its response. It might help to send the output to the list, or that may give you something to work with.
I hope this helps.
Regards, Michael Hudson
Chris Jones wrote:
Ok, now this is really weird!
We have 5 mail domains on our mail server. Each one has it’s own IP Address. Those IP’s are:
10.254.1.238 (ruralpress.com)
10.254.1.239 (villagvoice.com.au)
10.254.1.242 (bendigoadvertiser.com.au)
10.254.1.243 (mailtimes.com.au)
10.254.1.244 (thecourier.com.au)
If I access webmail by using ruralpress.com’s IP address, I get the blank page. If I go to 10.254.1.239:8383 it loads, first time every time. Same with .242 and .243. But, .244 gives me the same problem as the .238 one.
That is really weird!!!!
-----Original Message-----
*From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Travis Rabe
*Sent:* Sunday, 20 June 2004 10:02 AM
*To:* [EMAIL PROTECTED]
*Subject:* RE: [IMail Forum] 8.10, 8.11 & 8.12 Webmail, can't log in
I think only Ipswitch has it. I have not seen it for download.
Travis
-----Original Message----- *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Chris Jones *Sent:* Saturday, June 19, 2004 4:58 PM *To:* [EMAIL PROTECTED] *Subject:* RE: [IMail Forum] 8.10, 8.11 & 8.12 Webmail, can't log in
No I haven’t. Is there a tool I can download to do this?
Thanks heaps for all your help mate!
-----Original Message----- *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Travis Rabe *Sent:* Sunday, 20 June 2004 9:46 AM *To:* [EMAIL PROTECTED] *Subject:* RE: [IMail Forum] 8.10, 8.11 & 8.12 Webmail, can't log in
Figured it was a shot...I think the alis only has to do with delivery..not the web mail.
Hmm...I just tried mine with the IP Address approach only and everything seem to work just fine. Have you had Ipswitch run the reg checker onyour hive?
Travis
-----Original Message----- *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Chris Jones *Sent:* Saturday, June 19, 2004 4:31 PM *To:* [EMAIL PROTECTED] *Subject:* RE: [IMail Forum] 8.10, 8.11 & 8.12 Webmail, can't log in
Thanks. I just tried it, but it didn’t work.
I added 10.254.1.238 as a host alias for the rplemail.ruralpress.com domain. Stopped and started all Imail services (just in case). Didn’t make a difference. Still the same problem.
Thanks anyway though. I’m willing to try anything at the moment. I’ve spent my entire weekend trying things with no luck.
Thanks!
Chris
-----Original Message----- *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Travis Rabe *Sent:* Sunday, 20 June 2004 9:15 AM *To:* [EMAIL PROTECTED] *Subject:* RE: [IMail Forum] 8.10, 8.11 & 8.12 Webmail, can't log in
Maybe add your IP address as a host alias??
-----Original Message----- *From:* [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] *On Behalf Of *Chris Jones *Sent:* Saturday, June 19, 2004 3:51 PM *To:* [EMAIL PROTECTED] *Subject:* [IMail Forum] 8.10, 8.11 & 8.12 Webmail, can't log in
Hi all,
In versions 8.10, 8.11 & 8.12, there are new default webmail templates. They look good, much better than the old standard yellow templates.
However, if we try and access webmail via the IP of our mail server (http://10.254.1.238:8383 <http://10.254.1.238:8383/>) we are taken to http://10.254.1.238:8383/login.cgi?_ and the page never loads. It’s just a blank page. If I access the URL http://rplemail:8383 <http://rplemail:8383/> it works fine! RPLEMAIL is the netbios (WINS) name of the server.
I emailed Ipswitch and they suggested uninstalling and performing a full install of 8.11 (we had previously just used upgrades to get from version 8.00 to 8.11). So, yesterday morning (Saturday in Australia) I did this. I completely uninstalled Imail, then renamed the e:\Imail folder to Imail_OLD.
Installed the 8.11 full-install to e:\imail. I then checked the webmail, and it worked using the IP Address. Before I restored our data, I installed the 8.12 update. Checked webmail again and it was still working. Great!
Then, I copied back the directories for out 5 mail domains, the rules.ima file and the certificate I had created previously for SSL.
Next, I restored all values to the registry under HKEY_LOCAL_MACHINE\SOFTWARE\IPSWITCH\IMAIL\DOMAINS. Restarted all Imail services, and our 5 domains appeared in the Imail Administrator. Fantastic!
So, I checked the Webmail again, and surprise, surprise, Webmail was not working! Same problem! It happens as soon as I import the DOMAINS registry key. If I go into the Web Messaging Service and disable the “Enable User Login Suspend” option, the problem goes away. Enable it, and it comes back again.
So, I repeated the uninstall again. This time, I installed 8.11, upgraded to 8.12, then turned on that option. Webmail works!!!????
Restored our data…..doesn’t work.
I don’t understand what could be doing this. I am not restoring any of the Services registry information. Only our Domain information.
Does any one have any ideas? I really want to start using the new webmail templates included with Imail.
Thanks.
Chris Jones
Rural Press Technology
NSW, Australia
To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
