Ok, at first I had setup the port on the switch to show:
<Port Number>
<Interface Alias>
Vlan <VLAN>
and the vlan was duplicated.
now, I changed it to:
<Port Number>
Vlan <VLAN>
<Interface Alias>
and now it works correctly.. So it would seem that if <VLAN> is specified
last, it gets duplicated. Can any intermapper devs reproduce this at
Dartware central?
Now if I could just get rid of those nasty "ifAlias not available" tags
that make the network bubbles so big, my maps would be at least halfway usable.
At 12:08 PM 9/24/2007, you wrote:
So what ever happened with this? Now that I'm getting around to updating
some ports to show vlans, I find that 4.6.3 still has this
problem. Setting a network label to show vlan, it shows the number
twice.. going back to reset the label, and sure enough, it has
"<VLAN><VLAN>". So I remove one, and its still showing the number twice..
go back in, and its in there twice again....
Cisco 2950 switches, both snmp traffic probe, and cisco process and cpu
probe..
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
