Jon, Someone can correct me if I am wrong, but I believe this bug is fixed in the next release (4.6.3).
Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Jon Myers Sent: Monday, September 24, 2007 4:59 PM To: InterMapper Discussion Subject: Re: [IM-Talk] Problem with the new VLAN feature Ok, at first I had setup the port on the switch to show: <Port Number> <Interface Alias> Vlan <VLAN> and the vlan was duplicated. now, I changed it to: <Port Number> Vlan <VLAN> <Interface Alias> and now it works correctly.. So it would seem that if <VLAN> is specified last, it gets duplicated. Can any intermapper devs reproduce this at Dartware central? Now if I could just get rid of those nasty "ifAlias not available" tags that make the network bubbles so big, my maps would be at least halfway usable. At 12:08 PM 9/24/2007, you wrote: >So what ever happened with this? Now that I'm getting around to updating >some ports to show vlans, I find that 4.6.3 still has this >problem. Setting a network label to show vlan, it shows the number >twice.. going back to reset the label, and sure enough, it has >"<VLAN><VLAN>". So I remove one, and its still showing the number twice.. >go back in, and its in there twice again.... > >Cisco 2950 switches, both snmp traffic probe, and cisco process and cpu >probe.. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
