I'm using a fully charged 3S 3000mAh LiPo (this one actualy : https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=10298) It's able to power 4 Brushless motor for 15 min so i hope it have enough juice to sustain the ioio ^^
Le jeudi 27 mars 2014 22:56:31 UTC+1, Ytai a écrit : > > Inline > > > On Thu, Mar 27, 2014 at 1:25 PM, Rémy Grandin > <[email protected]<javascript:> > > wrote: > >> For all my previous test i used the Vin and ground pin and i recently >> brought a JST male connector (which by the way was a bit to large for the >> jst connector of the IOIO OTG) >> > > I meant what power supply are you using (voltage and current rating). It > is possible that the supply doesn't keep up with the charging current or > for any other reason drops the voltage below 5V. > > >> The weird thing is that it work well with my galaxy s 4 via open >> accessory but it dosn't work with the standard "debug mode" way >> > > This is not weird. IOIO over ADB does not work with Android >= 4.2 and in > this case you *have* to use OpenAccessory. > > >> >> I'm starting to ask myself if i should realy use the orange adaptator for >> connection the ioio or if i should use a microA <-> microA cable >> > > You probably mean micro-A <-> micro-B. That shouldn't make any difference > (except mechanical). Connecting the red adapter to a standard USB cable > effectively gives you the exact same cable as the one-piece one. > Please note that this cable is *not* symmetrical even though it may > appear to be. It should have an "A" side and a "B" side. The "A" side is > always the host (supplies power to the other, manages the bus). Typically, > unless you have a host-capable Android, which you want to power the IOIO, > you need to ensure the "A" side (e.g. the red cable) is on the IOIO side. > > >> >> >> Le jeudi 27 mars 2014 16:45:29 UTC+1, Ytai a écrit : >>> >>> What power supply are you using for the IOIO? How is it connected? >>> >>> >>> On Wed, Mar 26, 2014 at 11:47 AM, Rémy Grandin <[email protected]>wrote: >>> >>>> I've tried with and without, no more success. >>>> I've flashed it back with a stock samsung rom 2.3.6 but still no luck >>>> with the ioio >>>> >>>> nevertheless the phone work fine with standard usb debugging. Here is >>>> the logcat output when debugging the helloIOIO app : >>>> >>>> 03-26 19:01:37.828: D/IOIOConnectionRegistry(2613): Successfully added >>>> bootstrap class: ioio.lib.impl.SocketIOIOConnectionBootstrap >>>> 03-26 19:01:37.828: W/dalvikvm(2613): VFY: unable to resolve virtual >>>> method 49: Lcom/android/future/usb/UsbManager;.openAccessory >>>> (Lcom/android/future/usb/UsbAccessory;)Landroid/os/ >>>> ParcelFileDescriptor; >>>> 03-26 19:01:37.828: D/dalvikvm(2613): VFY: replacing opcode 0x6e at >>>> 0x0004 >>>> 03-26 19:01:37.828: D/dalvikvm(2613): VFY: dead code 0x0007-0026 in >>>> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.openStreams >>>> ()V >>>> 03-26 19:01:37.828: D/dalvikvm(2613): VFY: dead code 0x0028-002f in >>>> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.openStreams >>>> ()V >>>> 03-26 19:01:37.835: W/dalvikvm(2613): VFY: unable to resolve static >>>> method 47: Lcom/android/future/usb/UsbManager;.getInstance >>>> (Landroid/content/Context;)Lcom/android/future/usb/UsbManager; >>>> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: replacing opcode 0x71 at >>>> 0x0002 >>>> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x0005-000b in >>>> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.onCreate >>>> (Landroid/content/ContextWrapper;)V >>>> 03-26 19:01:37.835: W/dalvikvm(2613): VFY: unable to resolve virtual >>>> method 46: Lcom/android/future/usb/UsbManager;.getAccessoryList >>>> ()[Lcom/android/future/usb/UsbAccessory; >>>> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: replacing opcode 0x6e at >>>> 0x000b >>>> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x000e-0025 in >>>> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.open ()V >>>> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x0029-0054 in >>>> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.open ()V >>>> 03-26 19:01:37.835: D/IOIOConnectionRegistry(2613): No runtime support >>>> for: ioio.lib.android.accessory.AccessoryConnectionBootstrap. Not >>>> adding. >>>> 03-26 19:01:37.843: D/IOIOConnectionRegistry(2613): Successfully added >>>> bootstrap class: ioio.lib.android.bluetooth. >>>> BluetoothIOIOConnectionBootstrap >>>> 03-26 19:01:37.984: D/IOIOImpl(2613): Waiting for IOIO connection >>>> 03-26 19:01:37.984: V/IOIOImpl(2613): Waiting for underlying connection >>>> 03-26 19:01:37.984: V/SocketIOIOConnection(2613): Creating server socket >>>> 03-26 19:01:38.000: V/SocketIOIOConnection(2613): Waiting for TCP >>>> connection >>>> 03-26 19:01:41.367: D/IOIOImpl(2613): Client requested disconnect. >>>> 03-26 19:01:41.367: V/SocketIOIOConnection(2613): Client initiated >>>> disconnect >>>> 03-26 19:01:41.375: D/IOIOImpl(2613): Connection lost / aborted >>>> 03-26 19:01:41.375: D/IOIOBaseApplicationHelper(2613): IOIOThread is >>>> exiting >>>> 03-26 19:01:43.335: D/dalvikvm(2613): Debugger has detached; object >>>> registry had 1 entries >>>> 03-26 19:03:24.382: D/dalvikvm(2613): Debugger has detached; object >>>> registry had 1 entries >>>> 03-26 19:21:05.531: D/IOIOImpl(2613): Waiting for IOIO connection >>>> 03-26 19:21:05.531: V/IOIOImpl(2613): Waiting for underlying connection >>>> 03-26 19:21:05.531: V/SocketIOIOConnection(2613): Creating server socket >>>> 03-26 19:21:05.531: V/SocketIOIOConnection(2613): Waiting for TCP >>>> connection >>>> >>>> It don't seam to have any problem exept the missing open accessory >>>> classes, understandable beacause of the android version i'm running >>>> >>>> I've also see in the phone compatibility table that the galaxy Y worked >>>> under android 2.3.4. I will attempt to downgrade to this version (i don't >>>> have any other idea) >>>> >>>> Le vendredi 21 mars 2014 22:19:09 UTC+1, Ytai a écrit : >>>>> >>>>> Do you have USB debugging on at this point? Can you verify that it >>>>> works against a PC (and make sure it is* not* configured for wireless >>>>> mode)? >>>>> I've seen the Galaxy Y working with the IOIO with my own eyes, so >>>>> whatever issues you're seeing should be fixable. >>>>> Also, look at logcat for any clues regarding what's going on. >>>>> >>>>> >>>>> On Fri, Mar 21, 2014 at 11:31 AM, Rémy Grandin <[email protected]>wrote: >>>>> >>>>>> I've tested it with an old needle voltmetter wich game me about 5V >>>>>> for the 5volts rail (+- 0.3V) and around 3.1V for the 3.3 one (+- 0.3V), >>>>>> for each of the setting bellow : >>>>>> >>>>>> - Powered from the PC >>>>>> - Powered from the LiPo, nothing attached to the usb >>>>>> - Powered from the LiPo, connected to the phone via the setup 4 post >>>>>> above >>>>>> - Powered from the LiPo, connected to the BT adapter via the orange >>>>>> cable >>>>>> >>>>>> >>>>>> A change this time, my phone seam to change from the ioio bus with or >>>>>> withou the usb debugging, still no "connection". >>>>>> It also show me a notification to activate the USB File traspher as >>>>>> if it recognised the ioio as a PC >>>>>> >>>>>> >>>>>> Le jeudi 20 mars 2014 16:33:09 UTC+1, Ytai a écrit : >>>>>>> >>>>>>> Possibly this is a power supply issue. A 3s LiPo should be great >>>>>>> though. Can you measure the voltage on the 5v rail? >>>>>>> On Mar 20, 2014 2:54 AM, "Rémy Grandin" <[email protected]> wrote: >>>>>>> >>>>>>>> Has this IOIO *ever *worked with this phone for you or is this the >>>>>>>>> first time you're trying? >>>>>>>>> >>>>>>>> It worked indirectly via an adb wifi and my pc as relay >>>>>>>> with ioiobridge >>>>>>>> >>>>>>>> >>>>>>>>> What firmware versions are on the IOIO (ioiodude --port=xxx >>>>>>>>> versions)? >>>>>>>>> >>>>>>>> Hardware version: SPRK0020 >>>>>>>> Bootloader version: IOIO0400 >>>>>>>> Application version: IOIO0400 >>>>>>>> >>>>>>>> >>>>>>>>> Make sure ADB is enabled over USB for the IOIO to work. >>>>>>>>> Are you getting a charging icon on the phone when connecting the >>>>>>>>> IOIO? >>>>>>>>> >>>>>>>> Yes, but for only half a sec >>>>>>>> >>>>>>>> >>>>>>>>> Are you getting a debugging icon? >>>>>>>>> >>>>>>>> No >>>>>>>> >>>>>>>> >>>>>>>>> With bluetooth - can your PC pair with the IOIO? >>>>>>>>> >>>>>>>> The pc don't even see it >>>>>>>> >>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Mar 19, 2014 at 1:01 PM, Rémy Grandin <[email protected] >>>>>>>>> > wrote: >>>>>>>>> >>>>>>>>>> sorry, me again ... : >>>>>>>>>> >>>>>>>>>> the ioio ->PC->wifi->phone worked well but i can't get it to work >>>>>>>>>> while directly connected to my phone. Here is my setting : >>>>>>>>>> >>>>>>>>>> µUSB b standard samsung cable USB a >>>>>>>>>> ioio's orange cable >>>>>>>>>> >>>>>>>>>> Phone [[[[<<===========================>>]]]==================>>]] >>>>>>>>>> IOIO >>>>>>>>>> >>>>>>>>>> For this setup, my ioio is powered by an external source (a LiPo >>>>>>>>>> 3S) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I also tried over bluetooth with one of the recommended dongle >>>>>>>>>> (this one : http://dx.com/p/ultra-mini-b >>>>>>>>>> luetooth-3-0-usb-dongle-65631) >>>>>>>>>> but whe i connect it it glow for half a second and don't glow >>>>>>>>>> again and obviously isn't viewable in the Bluetooth section of my >>>>>>>>>> phone or >>>>>>>>>> PC >>>>>>>>>> >>>>>>>>>> PS : i checked the potentiometer is all clockwise >>>>>>>>>> >>>>>>>>>> Le mardi 18 mars 2014 01:16:01 UTC+1, Ytai a écrit : >>>>>>>>>>> >>>>>>>>>>> You cannot debug and use the IOIO over USB at the same time. >>>>>>>>>>> Your options are either: >>>>>>>>>>> >>>>>>>>>>> - Connect to the IOIO over Bluetooth (for development time) >>>>>>>>>>> and do debugging over USB / WiFi. >>>>>>>>>>> - Connect the IOIO to your development PC (over Bluetooth or >>>>>>>>>>> USB), your phone to the PC over USB / Wifi and use >>>>>>>>>>> IOIOBridge<https://github.com/ytai/ioio/wiki/IOIO-Bridge> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Mar 17, 2014 at 10:54 AM, Rémy Grandin < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi everyone, >>>>>>>>>>>> >>>>>>>>>>>> I recently receive my beautifull ioio and i'm starting to play >>>>>>>>>>>> around with it. My project is to uste it ton manage a half >>>>>>>>>>>> automatic quad >>>>>>>>>>>> copter drone. But, i'm a bit stuck at square one : >>>>>>>>>>>> I brought an cheap android phone to be the computation core of >>>>>>>>>>>> my drone but i have trouble get it to connect to the ioio. It's a >>>>>>>>>>>> samsung >>>>>>>>>>>> galaxy Y (GT-S5360) under android 2.3.6. >>>>>>>>>>>> I'm connecting to it via wifi adb and i have of course the usb >>>>>>>>>>>> debugging on and the ioio connected to it via a standard usb cable >>>>>>>>>>>> and the >>>>>>>>>>>> orange converter. But i can't seam to be able to light up the stat >>>>>>>>>>>> led >>>>>>>>>>>> using helo ioio app and nothing valuable show int the console or >>>>>>>>>>>> logcat >>>>>>>>>>>> >>>>>>>>>>>> Any Idea on how to debug that ? >>>>>>>>>>>> >>>>>>>>>>>> PS : I've upgraded my ioio to the v4 firmware >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> To post to this group, send email to [email protected]. >>>>>>>>>>>> >>>>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To post to this group, send email to [email protected]. >>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "ioio-users" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To post to this group, send email to [email protected]. >>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "ioio-users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To post to this group, send email to [email protected]. >>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
