For all my previous test i used the Vin and ground pin and i recently brought a JST male connector (which by the way was a bit to large for the jst connector of the IOIO OTG) The weird thing is that it work well with my galaxy s 4 via open accessory but it dosn't work with the standard "debug mode" way
I'm starting to ask myself if i should realy use the orange adaptator for connection the ioio or if i should use a microA <-> microA cable Le jeudi 27 mars 2014 16:45:29 UTC+1, Ytai a écrit : > > What power supply are you using for the IOIO? How is it connected? > > > On Wed, Mar 26, 2014 at 11:47 AM, Rémy Grandin > <[email protected]<javascript:> > > wrote: > >> I've tried with and without, no more success. >> I've flashed it back with a stock samsung rom 2.3.6 but still no luck >> with the ioio >> >> nevertheless the phone work fine with standard usb debugging. Here is the >> logcat output when debugging the helloIOIO app : >> >> 03-26 19:01:37.828: D/IOIOConnectionRegistry(2613): Successfully added >> bootstrap class: ioio.lib.impl.SocketIOIOConnectionBootstrap >> 03-26 19:01:37.828: W/dalvikvm(2613): VFY: unable to resolve virtual >> method 49: Lcom/android/future/usb/UsbManager;.openAccessory >> (Lcom/android/future/usb/UsbAccessory;)Landroid/os/ParcelFileDescriptor; >> 03-26 19:01:37.828: D/dalvikvm(2613): VFY: replacing opcode 0x6e at 0x0004 >> 03-26 19:01:37.828: D/dalvikvm(2613): VFY: dead code 0x0007-0026 in >> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.openStreams ()V >> 03-26 19:01:37.828: D/dalvikvm(2613): VFY: dead code 0x0028-002f in >> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.openStreams ()V >> 03-26 19:01:37.835: W/dalvikvm(2613): VFY: unable to resolve static >> method 47: Lcom/android/future/usb/UsbManager;.getInstance >> (Landroid/content/Context;)Lcom/android/future/usb/UsbManager; >> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: replacing opcode 0x71 at 0x0002 >> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x0005-000b in >> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.onCreate >> (Landroid/content/ContextWrapper;)V >> 03-26 19:01:37.835: W/dalvikvm(2613): VFY: unable to resolve virtual >> method 46: Lcom/android/future/usb/UsbManager;.getAccessoryList >> ()[Lcom/android/future/usb/UsbAccessory; >> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: replacing opcode 0x6e at 0x000b >> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x000e-0025 in >> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.open ()V >> 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x0029-0054 in >> Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.open ()V >> 03-26 19:01:37.835: D/IOIOConnectionRegistry(2613): No runtime support >> for: ioio.lib.android.accessory.AccessoryConnectionBootstrap. Not adding. >> 03-26 19:01:37.843: D/IOIOConnectionRegistry(2613): Successfully added >> bootstrap class: ioio.lib.android.bluetooth.BluetoothIOIOConnectionBootstrap >> 03-26 19:01:37.984: D/IOIOImpl(2613): Waiting for IOIO connection >> 03-26 19:01:37.984: V/IOIOImpl(2613): Waiting for underlying connection >> 03-26 19:01:37.984: V/SocketIOIOConnection(2613): Creating server socket >> 03-26 19:01:38.000: V/SocketIOIOConnection(2613): Waiting for TCP >> connection >> 03-26 19:01:41.367: D/IOIOImpl(2613): Client requested disconnect. >> 03-26 19:01:41.367: V/SocketIOIOConnection(2613): Client initiated >> disconnect >> 03-26 19:01:41.375: D/IOIOImpl(2613): Connection lost / aborted >> 03-26 19:01:41.375: D/IOIOBaseApplicationHelper(2613): IOIOThread is >> exiting >> 03-26 19:01:43.335: D/dalvikvm(2613): Debugger has detached; object >> registry had 1 entries >> 03-26 19:03:24.382: D/dalvikvm(2613): Debugger has detached; object >> registry had 1 entries >> 03-26 19:21:05.531: D/IOIOImpl(2613): Waiting for IOIO connection >> 03-26 19:21:05.531: V/IOIOImpl(2613): Waiting for underlying connection >> 03-26 19:21:05.531: V/SocketIOIOConnection(2613): Creating server socket >> 03-26 19:21:05.531: V/SocketIOIOConnection(2613): Waiting for TCP >> connection >> >> It don't seam to have any problem exept the missing open accessory >> classes, understandable beacause of the android version i'm running >> >> I've also see in the phone compatibility table that the galaxy Y worked >> under android 2.3.4. I will attempt to downgrade to this version (i don't >> have any other idea) >> >> Le vendredi 21 mars 2014 22:19:09 UTC+1, Ytai a écrit : >>> >>> Do you have USB debugging on at this point? Can you verify that it works >>> against a PC (and make sure it is* not* configured for wireless mode)? >>> I've seen the Galaxy Y working with the IOIO with my own eyes, so >>> whatever issues you're seeing should be fixable. >>> Also, look at logcat for any clues regarding what's going on. >>> >>> >>> On Fri, Mar 21, 2014 at 11:31 AM, Rémy Grandin <[email protected]>wrote: >>> >>>> I've tested it with an old needle voltmetter wich game me about 5V for >>>> the 5volts rail (+- 0.3V) and around 3.1V for the 3.3 one (+- 0.3V), for >>>> each of the setting bellow : >>>> >>>> - Powered from the PC >>>> - Powered from the LiPo, nothing attached to the usb >>>> - Powered from the LiPo, connected to the phone via the setup 4 post >>>> above >>>> - Powered from the LiPo, connected to the BT adapter via the orange >>>> cable >>>> >>>> >>>> A change this time, my phone seam to change from the ioio bus with or >>>> withou the usb debugging, still no "connection". >>>> It also show me a notification to activate the USB File traspher as if >>>> it recognised the ioio as a PC >>>> >>>> >>>> Le jeudi 20 mars 2014 16:33:09 UTC+1, Ytai a écrit : >>>>> >>>>> Possibly this is a power supply issue. A 3s LiPo should be great >>>>> though. Can you measure the voltage on the 5v rail? >>>>> On Mar 20, 2014 2:54 AM, "Rémy Grandin" <[email protected]> wrote: >>>>> >>>>>> Has this IOIO *ever *worked with this phone for you or is this the >>>>>>> first time you're trying? >>>>>>> >>>>>> It worked indirectly via an adb wifi and my pc as relay with >>>>>> ioiobridge >>>>>> >>>>>> >>>>>>> What firmware versions are on the IOIO (ioiodude --port=xxx >>>>>>> versions)? >>>>>>> >>>>>> Hardware version: SPRK0020 >>>>>> Bootloader version: IOIO0400 >>>>>> Application version: IOIO0400 >>>>>> >>>>>> >>>>>>> Make sure ADB is enabled over USB for the IOIO to work. >>>>>>> Are you getting a charging icon on the phone when connecting the >>>>>>> IOIO? >>>>>>> >>>>>> Yes, but for only half a sec >>>>>> >>>>>> >>>>>>> Are you getting a debugging icon? >>>>>>> >>>>>> No >>>>>> >>>>>> >>>>>>> With bluetooth - can your PC pair with the IOIO? >>>>>>> >>>>>> The pc don't even see it >>>>>> >>>>>> >>>>>>> >>>>>>> On Wed, Mar 19, 2014 at 1:01 PM, Rémy Grandin >>>>>>> <[email protected]>wrote: >>>>>>> >>>>>>>> sorry, me again ... : >>>>>>>> >>>>>>>> the ioio ->PC->wifi->phone worked well but i can't get it to work >>>>>>>> while directly connected to my phone. Here is my setting : >>>>>>>> >>>>>>>> µUSB b standard samsung cable USB a >>>>>>>> ioio's orange cable >>>>>>>> >>>>>>>> Phone [[[[<<===========================>>]]]==================>>]] >>>>>>>> IOIO >>>>>>>> >>>>>>>> For this setup, my ioio is powered by an external source (a LiPo 3S) >>>>>>>> >>>>>>>> >>>>>>>> I also tried over bluetooth with one of the recommended dongle >>>>>>>> (this one : http://dx.com/p/ultra-mini-b >>>>>>>> luetooth-3-0-usb-dongle-65631) >>>>>>>> but whe i connect it it glow for half a second and don't glow again >>>>>>>> and obviously isn't viewable in the Bluetooth section of my phone or PC >>>>>>>> >>>>>>>> PS : i checked the potentiometer is all clockwise >>>>>>>> >>>>>>>> Le mardi 18 mars 2014 01:16:01 UTC+1, Ytai a écrit : >>>>>>>>> >>>>>>>>> You cannot debug and use the IOIO over USB at the same time. >>>>>>>>> Your options are either: >>>>>>>>> >>>>>>>>> - Connect to the IOIO over Bluetooth (for development time) >>>>>>>>> and do debugging over USB / WiFi. >>>>>>>>> - Connect the IOIO to your development PC (over Bluetooth or >>>>>>>>> USB), your phone to the PC over USB / Wifi and use >>>>>>>>> IOIOBridge<https://github.com/ytai/ioio/wiki/IOIO-Bridge> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, Mar 17, 2014 at 10:54 AM, Rémy Grandin < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Hi everyone, >>>>>>>>>> >>>>>>>>>> I recently receive my beautifull ioio and i'm starting to play >>>>>>>>>> around with it. My project is to uste it ton manage a half automatic >>>>>>>>>> quad >>>>>>>>>> copter drone. But, i'm a bit stuck at square one : >>>>>>>>>> I brought an cheap android phone to be the computation core of my >>>>>>>>>> drone but i have trouble get it to connect to the ioio. It's a >>>>>>>>>> samsung >>>>>>>>>> galaxy Y (GT-S5360) under android 2.3.6. >>>>>>>>>> I'm connecting to it via wifi adb and i have of course the usb >>>>>>>>>> debugging on and the ioio connected to it via a standard usb cable >>>>>>>>>> and the >>>>>>>>>> orange converter. But i can't seam to be able to light up the stat >>>>>>>>>> led >>>>>>>>>> using helo ioio app and nothing valuable show int the console or >>>>>>>>>> logcat >>>>>>>>>> >>>>>>>>>> Any Idea on how to debug that ? >>>>>>>>>> >>>>>>>>>> PS : I've upgraded my ioio to the v4 firmware >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To post to this group, send email to [email protected]. >>>>>>>>>> >>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "ioio-users" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> To post to this group, send email to [email protected]. >>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> >>>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "ioio-users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To post to this group, send email to [email protected]. >>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
