What power supply are you using for the IOIO? How is it connected?
On Wed, Mar 26, 2014 at 11:47 AM, Rémy Grandin <[email protected]>wrote: > I've tried with and without, no more success. > I've flashed it back with a stock samsung rom 2.3.6 but still no luck with > the ioio > > nevertheless the phone work fine with standard usb debugging. Here is the > logcat output when debugging the helloIOIO app : > > 03-26 19:01:37.828: D/IOIOConnectionRegistry(2613): Successfully added > bootstrap class: ioio.lib.impl.SocketIOIOConnectionBootstrap > 03-26 19:01:37.828: W/dalvikvm(2613): VFY: unable to resolve virtual > method 49: Lcom/android/future/usb/UsbManager;.openAccessory > (Lcom/android/future/usb/UsbAccessory;)Landroid/os/ParcelFileDescriptor; > 03-26 19:01:37.828: D/dalvikvm(2613): VFY: replacing opcode 0x6e at 0x0004 > 03-26 19:01:37.828: D/dalvikvm(2613): VFY: dead code 0x0007-0026 in > Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.openStreams ()V > 03-26 19:01:37.828: D/dalvikvm(2613): VFY: dead code 0x0028-002f in > Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.openStreams ()V > 03-26 19:01:37.835: W/dalvikvm(2613): VFY: unable to resolve static method > 47: Lcom/android/future/usb/UsbManager;.getInstance > (Landroid/content/Context;)Lcom/android/future/usb/UsbManager; > 03-26 19:01:37.835: D/dalvikvm(2613): VFY: replacing opcode 0x71 at 0x0002 > 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x0005-000b in > Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.onCreate > (Landroid/content/ContextWrapper;)V > 03-26 19:01:37.835: W/dalvikvm(2613): VFY: unable to resolve virtual > method 46: Lcom/android/future/usb/UsbManager;.getAccessoryList > ()[Lcom/android/future/usb/UsbAccessory; > 03-26 19:01:37.835: D/dalvikvm(2613): VFY: replacing opcode 0x6e at 0x000b > 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x000e-0025 in > Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.open ()V > 03-26 19:01:37.835: D/dalvikvm(2613): VFY: dead code 0x0029-0054 in > Lioio/lib/android/accessory/AccessoryConnectionBootstrap;.open ()V > 03-26 19:01:37.835: D/IOIOConnectionRegistry(2613): No runtime support > for: ioio.lib.android.accessory.AccessoryConnectionBootstrap. Not adding. > 03-26 19:01:37.843: D/IOIOConnectionRegistry(2613): Successfully added > bootstrap class: ioio.lib.android.bluetooth.BluetoothIOIOConnectionBootstrap > 03-26 19:01:37.984: D/IOIOImpl(2613): Waiting for IOIO connection > 03-26 19:01:37.984: V/IOIOImpl(2613): Waiting for underlying connection > 03-26 19:01:37.984: V/SocketIOIOConnection(2613): Creating server socket > 03-26 19:01:38.000: V/SocketIOIOConnection(2613): Waiting for TCP > connection > 03-26 19:01:41.367: D/IOIOImpl(2613): Client requested disconnect. > 03-26 19:01:41.367: V/SocketIOIOConnection(2613): Client initiated > disconnect > 03-26 19:01:41.375: D/IOIOImpl(2613): Connection lost / aborted > 03-26 19:01:41.375: D/IOIOBaseApplicationHelper(2613): IOIOThread is > exiting > 03-26 19:01:43.335: D/dalvikvm(2613): Debugger has detached; object > registry had 1 entries > 03-26 19:03:24.382: D/dalvikvm(2613): Debugger has detached; object > registry had 1 entries > 03-26 19:21:05.531: D/IOIOImpl(2613): Waiting for IOIO connection > 03-26 19:21:05.531: V/IOIOImpl(2613): Waiting for underlying connection > 03-26 19:21:05.531: V/SocketIOIOConnection(2613): Creating server socket > 03-26 19:21:05.531: V/SocketIOIOConnection(2613): Waiting for TCP > connection > > It don't seam to have any problem exept the missing open accessory > classes, understandable beacause of the android version i'm running > > I've also see in the phone compatibility table that the galaxy Y worked > under android 2.3.4. I will attempt to downgrade to this version (i don't > have any other idea) > > Le vendredi 21 mars 2014 22:19:09 UTC+1, Ytai a écrit : >> >> Do you have USB debugging on at this point? Can you verify that it works >> against a PC (and make sure it is* not* configured for wireless mode)? >> I've seen the Galaxy Y working with the IOIO with my own eyes, so >> whatever issues you're seeing should be fixable. >> Also, look at logcat for any clues regarding what's going on. >> >> >> On Fri, Mar 21, 2014 at 11:31 AM, Rémy Grandin <[email protected]>wrote: >> >>> I've tested it with an old needle voltmetter wich game me about 5V for >>> the 5volts rail (+- 0.3V) and around 3.1V for the 3.3 one (+- 0.3V), for >>> each of the setting bellow : >>> >>> - Powered from the PC >>> - Powered from the LiPo, nothing attached to the usb >>> - Powered from the LiPo, connected to the phone via the setup 4 post >>> above >>> - Powered from the LiPo, connected to the BT adapter via the orange cable >>> >>> >>> A change this time, my phone seam to change from the ioio bus with or >>> withou the usb debugging, still no "connection". >>> It also show me a notification to activate the USB File traspher as if >>> it recognised the ioio as a PC >>> >>> >>> Le jeudi 20 mars 2014 16:33:09 UTC+1, Ytai a écrit : >>>> >>>> Possibly this is a power supply issue. A 3s LiPo should be great >>>> though. Can you measure the voltage on the 5v rail? >>>> On Mar 20, 2014 2:54 AM, "Rémy Grandin" <[email protected]> wrote: >>>> >>>>> Has this IOIO *ever *worked with this phone for you or is this the >>>>>> first time you're trying? >>>>>> >>>>> It worked indirectly via an adb wifi and my pc as relay with >>>>> ioiobridge >>>>> >>>>> >>>>>> What firmware versions are on the IOIO (ioiodude --port=xxx versions)? >>>>>> >>>>> Hardware version: SPRK0020 >>>>> Bootloader version: IOIO0400 >>>>> Application version: IOIO0400 >>>>> >>>>> >>>>>> Make sure ADB is enabled over USB for the IOIO to work. >>>>>> Are you getting a charging icon on the phone when connecting the IOIO? >>>>>> >>>>> Yes, but for only half a sec >>>>> >>>>> >>>>>> Are you getting a debugging icon? >>>>>> >>>>> No >>>>> >>>>> >>>>>> With bluetooth - can your PC pair with the IOIO? >>>>>> >>>>> The pc don't even see it >>>>> >>>>> >>>>>> >>>>>> On Wed, Mar 19, 2014 at 1:01 PM, Rémy Grandin <[email protected]>wrote: >>>>>> >>>>>>> sorry, me again ... : >>>>>>> >>>>>>> the ioio ->PC->wifi->phone worked well but i can't get it to work >>>>>>> while directly connected to my phone. Here is my setting : >>>>>>> >>>>>>> µUSB b standard samsung cable USB a >>>>>>> ioio's orange cable >>>>>>> >>>>>>> Phone [[[[<<===========================>>]]]==================>>]] >>>>>>> IOIO >>>>>>> >>>>>>> For this setup, my ioio is powered by an external source (a LiPo 3S) >>>>>>> >>>>>>> >>>>>>> I also tried over bluetooth with one of the recommended dongle (this >>>>>>> one : http://dx.com/p/ultra-mini-bluetooth-3-0-usb-dongle-65631) >>>>>>> but whe i connect it it glow for half a second and don't glow again >>>>>>> and obviously isn't viewable in the Bluetooth section of my phone or PC >>>>>>> >>>>>>> PS : i checked the potentiometer is all clockwise >>>>>>> >>>>>>> Le mardi 18 mars 2014 01:16:01 UTC+1, Ytai a écrit : >>>>>>>> >>>>>>>> You cannot debug and use the IOIO over USB at the same time. >>>>>>>> Your options are either: >>>>>>>> >>>>>>>> - Connect to the IOIO over Bluetooth (for development time) and >>>>>>>> do debugging over USB / WiFi. >>>>>>>> - Connect the IOIO to your development PC (over Bluetooth or >>>>>>>> USB), your phone to the PC over USB / Wifi and use >>>>>>>> IOIOBridge<https://github.com/ytai/ioio/wiki/IOIO-Bridge> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Mon, Mar 17, 2014 at 10:54 AM, Rémy Grandin <[email protected] >>>>>>>> > wrote: >>>>>>>> >>>>>>>>> Hi everyone, >>>>>>>>> >>>>>>>>> I recently receive my beautifull ioio and i'm starting to play >>>>>>>>> around with it. My project is to uste it ton manage a half automatic >>>>>>>>> quad >>>>>>>>> copter drone. But, i'm a bit stuck at square one : >>>>>>>>> I brought an cheap android phone to be the computation core of my >>>>>>>>> drone but i have trouble get it to connect to the ioio. It's a samsung >>>>>>>>> galaxy Y (GT-S5360) under android 2.3.6. >>>>>>>>> I'm connecting to it via wifi adb and i have of course the usb >>>>>>>>> debugging on and the ioio connected to it via a standard usb cable >>>>>>>>> and the >>>>>>>>> orange converter. But i can't seam to be able to light up the stat led >>>>>>>>> using helo ioio app and nothing valuable show int the console or >>>>>>>>> logcat >>>>>>>>> >>>>>>>>> Any Idea on how to debug that ? >>>>>>>>> >>>>>>>>> PS : I've upgraded my ioio to the v4 firmware >>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "ioio-users" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To post to this group, send email to [email protected]. >>>>>>>>> >>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "ioio-users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To post to this group, send email to [email protected]. >>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To post to this group, send email to [email protected]. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
