Do you have USB debugging on at this point? Can you verify that it works against a PC (and make sure it is* not* configured for wireless mode)? I've seen the Galaxy Y working with the IOIO with my own eyes, so whatever issues you're seeing should be fixable. Also, look at logcat for any clues regarding what's going on.
On Fri, Mar 21, 2014 at 11:31 AM, Rémy Grandin <[email protected]>wrote: > I've tested it with an old needle voltmetter wich game me about 5V for the > 5volts rail (+- 0.3V) and around 3.1V for the 3.3 one (+- 0.3V), for each > of the setting bellow : > > - Powered from the PC > - Powered from the LiPo, nothing attached to the usb > - Powered from the LiPo, connected to the phone via the setup 4 post above > - Powered from the LiPo, connected to the BT adapter via the orange cable > > > A change this time, my phone seam to change from the ioio bus with or > withou the usb debugging, still no "connection". > It also show me a notification to activate the USB File traspher as if it > recognised the ioio as a PC > > > Le jeudi 20 mars 2014 16:33:09 UTC+1, Ytai a écrit : >> >> Possibly this is a power supply issue. A 3s LiPo should be great though. >> Can you measure the voltage on the 5v rail? >> On Mar 20, 2014 2:54 AM, "Rémy Grandin" <[email protected]> wrote: >> >>> Has this IOIO *ever *worked with this phone for you or is this the >>>> first time you're trying? >>>> >>> It worked indirectly via an adb wifi and my pc as relay with >>> ioiobridge >>> >>> >>>> What firmware versions are on the IOIO (ioiodude --port=xxx versions)? >>>> >>> Hardware version: SPRK0020 >>> Bootloader version: IOIO0400 >>> Application version: IOIO0400 >>> >>> >>>> Make sure ADB is enabled over USB for the IOIO to work. >>>> Are you getting a charging icon on the phone when connecting the IOIO? >>>> >>> Yes, but for only half a sec >>> >>> >>>> Are you getting a debugging icon? >>>> >>> No >>> >>> >>>> With bluetooth - can your PC pair with the IOIO? >>>> >>> The pc don't even see it >>> >>> >>>> >>>> On Wed, Mar 19, 2014 at 1:01 PM, Rémy Grandin <[email protected]>wrote: >>>> >>>>> sorry, me again ... : >>>>> >>>>> the ioio ->PC->wifi->phone worked well but i can't get it to work >>>>> while directly connected to my phone. Here is my setting : >>>>> >>>>> µUSB b standard samsung cable USB a ioio's >>>>> orange cable >>>>> >>>>> Phone [[[[<<===========================>>]]]==================>>]] >>>>> IOIO >>>>> >>>>> For this setup, my ioio is powered by an external source (a LiPo 3S) >>>>> >>>>> >>>>> I also tried over bluetooth with one of the recommended dongle (this >>>>> one : http://dx.com/p/ultra-mini-bluetooth-3-0-usb-dongle-65631) >>>>> but whe i connect it it glow for half a second and don't glow again >>>>> and obviously isn't viewable in the Bluetooth section of my phone or PC >>>>> >>>>> PS : i checked the potentiometer is all clockwise >>>>> >>>>> Le mardi 18 mars 2014 01:16:01 UTC+1, Ytai a écrit : >>>>>> >>>>>> You cannot debug and use the IOIO over USB at the same time. >>>>>> Your options are either: >>>>>> >>>>>> - Connect to the IOIO over Bluetooth (for development time) and >>>>>> do debugging over USB / WiFi. >>>>>> - Connect the IOIO to your development PC (over Bluetooth or >>>>>> USB), your phone to the PC over USB / Wifi and use >>>>>> IOIOBridge<https://github.com/ytai/ioio/wiki/IOIO-Bridge> >>>>>> >>>>>> >>>>>> >>>>>> On Mon, Mar 17, 2014 at 10:54 AM, Rémy Grandin >>>>>> <[email protected]>wrote: >>>>>> >>>>>>> Hi everyone, >>>>>>> >>>>>>> I recently receive my beautifull ioio and i'm starting to play >>>>>>> around with it. My project is to uste it ton manage a half automatic >>>>>>> quad >>>>>>> copter drone. But, i'm a bit stuck at square one : >>>>>>> I brought an cheap android phone to be the computation core of my >>>>>>> drone but i have trouble get it to connect to the ioio. It's a samsung >>>>>>> galaxy Y (GT-S5360) under android 2.3.6. >>>>>>> I'm connecting to it via wifi adb and i have of course the usb >>>>>>> debugging on and the ioio connected to it via a standard usb cable and >>>>>>> the >>>>>>> orange converter. But i can't seam to be able to light up the stat led >>>>>>> using helo ioio app and nothing valuable show int the console or logcat >>>>>>> >>>>>>> Any Idea on how to debug that ? >>>>>>> >>>>>>> PS : I've upgraded my ioio to the v4 firmware >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "ioio-users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To post to this group, send email to [email protected]. >>>>>>> >>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To post to this group, send email to [email protected]. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
