I've tested it with an old needle voltmetter wich game me about 5V for the 5volts rail (+- 0.3V) and around 3.1V for the 3.3 one (+- 0.3V), for each of the setting bellow :
- Powered from the PC - Powered from the LiPo, nothing attached to the usb - Powered from the LiPo, connected to the phone via the setup 4 post above - Powered from the LiPo, connected to the BT adapter via the orange cable A change this time, my phone seam to change from the ioio bus with or withou the usb debugging, still no "connection". It also show me a notification to activate the USB File traspher as if it recognised the ioio as a PC Le jeudi 20 mars 2014 16:33:09 UTC+1, Ytai a écrit : > > Possibly this is a power supply issue. A 3s LiPo should be great though. > Can you measure the voltage on the 5v rail? > On Mar 20, 2014 2:54 AM, "Rémy Grandin" <[email protected] <javascript:>> > wrote: > >> Has this IOIO *ever *worked with this phone for you or is this the first >>> time you're trying? >>> >> It worked indirectly via an adb wifi and my pc as relay with >> ioiobridge >> >> >>> What firmware versions are on the IOIO (ioiodude --port=xxx versions)? >>> >> Hardware version: SPRK0020 >> Bootloader version: IOIO0400 >> Application version: IOIO0400 >> >> >>> Make sure ADB is enabled over USB for the IOIO to work. >>> Are you getting a charging icon on the phone when connecting the IOIO? >>> >> Yes, but for only half a sec >> >> >>> Are you getting a debugging icon? >>> >> No >> >> >>> With bluetooth - can your PC pair with the IOIO? >>> >> The pc don't even see it >> >> >>> >>> On Wed, Mar 19, 2014 at 1:01 PM, Rémy Grandin <[email protected]>wrote: >>> >>>> sorry, me again ... : >>>> >>>> the ioio ->PC->wifi->phone worked well but i can't get it to work while >>>> directly connected to my phone. Here is my setting : >>>> >>>> µUSB b standard samsung cable USB a ioio's >>>> orange cable >>>> >>>> Phone [[[[<<===========================>>]]]==================>>]] IOIO >>>> >>>> For this setup, my ioio is powered by an external source (a LiPo 3S) >>>> >>>> >>>> I also tried over bluetooth with one of the recommended dongle (this >>>> one : http://dx.com/p/ultra-mini-bluetooth-3-0-usb-dongle-65631) >>>> but whe i connect it it glow for half a second and don't glow again and >>>> obviously isn't viewable in the Bluetooth section of my phone or PC >>>> >>>> PS : i checked the potentiometer is all clockwise >>>> >>>> Le mardi 18 mars 2014 01:16:01 UTC+1, Ytai a écrit : >>>>> >>>>> You cannot debug and use the IOIO over USB at the same time. >>>>> Your options are either: >>>>> >>>>> - Connect to the IOIO over Bluetooth (for development time) and do >>>>> debugging over USB / WiFi. >>>>> - Connect the IOIO to your development PC (over Bluetooth or USB), >>>>> your phone to the PC over USB / Wifi and use >>>>> IOIOBridge<https://github.com/ytai/ioio/wiki/IOIO-Bridge> >>>>> >>>>> >>>>> >>>>> On Mon, Mar 17, 2014 at 10:54 AM, Rémy Grandin <[email protected]>wrote: >>>>> >>>>>> Hi everyone, >>>>>> >>>>>> I recently receive my beautifull ioio and i'm starting to play around >>>>>> with it. My project is to uste it ton manage a half automatic quad >>>>>> copter >>>>>> drone. But, i'm a bit stuck at square one : >>>>>> I brought an cheap android phone to be the computation core of my >>>>>> drone but i have trouble get it to connect to the ioio. It's a samsung >>>>>> galaxy Y (GT-S5360) under android 2.3.6. >>>>>> I'm connecting to it via wifi adb and i have of course the usb >>>>>> debugging on and the ioio connected to it via a standard usb cable and >>>>>> the >>>>>> orange converter. But i can't seam to be able to light up the stat led >>>>>> using helo ioio app and nothing valuable show int the console or logcat >>>>>> >>>>>> Any Idea on how to debug that ? >>>>>> >>>>>> PS : I've upgraded my ioio to the v4 firmware >>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "ioio-users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To post to this group, send email to [email protected]. >>>>>> >>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
