I have a IOIO Mint bundle (came with the USB BT dongle) that connected with bluetooth a few times and now will not. I try scanning for the IOIO through the BT settings on my phone but it does not find the IOIO to pair or select it. Here is more information: When powered on through the LIPO battery the power led is very dim and the battery voltage is 1.8v (all other leds are off and the battery reads 2.51v when disconnected). If I connect a charger through the micro usb port the battery voltage goes to 2.14v while connected to the board. I have tried charging the board overnight but it still goes dim while not plugged into the charger. With the micro usb power applied I have the power led bright, amber led near power connector on, amber led near usb port flashes every 2 secs along with usb BT dongle flashes red right after the usb led flashes. If I connect a usb cable to the IOIO and to my Galaxy S3 it connects and I can run the app IOIO hardware tester and it connects with the IOIO This is the info that I get while connected and I can also turn the onboard led on and off through the app. Status: Connected Device name: SGH-I747M Android Version: 4.1.2 BT Adapter: Enabled IOIO Hardware: MINT0010 IOIO Bootloader: IOIO0304 IOIO Firmware:IOIO0324 Connnection Type: Socket (ADB) BT Dongle Address: N/A
Please Help. Thanks -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
