I have a new IOIO Mint that connected by BT a few times and now will not. Here is the LED status and battery voltage (LEDs are PWR - red, OK - green, CH - amber, STAT - amber, BT - dongle LED) and other info.
IOIO turned off and micro usb disconnected PWR off OK off CH off STAT off BT off 2.1v battery plugged in IOIO turned on and micro usb disconnected PWR dim OK off CH off STAT off BT off 1.9v battery plugged in IOIO turned off and unit charging with micro usb PWR off OK on CH on STAT off BT off 2.1v battery plugged in IOIO turned on and unit charging with micro usb PWR on OK off CH on STAT flashing every 2 secs BT flashing every 2 secs 2.1v battery plugged in The battery measures 2.6v battery un-plugged. If I remove the USB BT adapter and connect a usb to micro usb cable to my Galaxy S3 I can run IOIO Hardware Tester and get the following: Status: Connected Device Name: SGH-I1747M Android Version: 4.1.2 BT Adapter:Enabled IOIO Hardware: MINT0010 IOIO Bootloader: IOIO0304 IOIO Firmware:IOIO0324 Connection Type:Socket(ADB) BT Dongle Address: N/A and pressing the Functionality Test Yellow LED turns the STAT led on and off I don't know if something is corrupt or if this is a hardware problem. Please help - Thanks -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
