I have a strange (or maybe not so strange) problem showing up with a tried and true setup. I have a IOIO app that works great with several other IOIO boards and is well tested for a while. The hardware/circuit setup is also well tested, although this is a new build. I shorted the 5v to ground on the IOIO while building out this setup (I know! Dumb mistake) enough to disable the USB port on my laptop requiring a reboot... Once I hooked back up and re-ran the app, everything seemed to be working fine with the app and the hardware, but after precisely 16 presses of a switch connected to the board, the setup stops working and seems to freeze LEDs and does not accept new button press inputs. I don't see any errors in the console so the app seems to be just waiting for the next hardware input that never comes. Did I mess up the IOIO? Is there something I should/can do to check its health? Seems odd that it is consistently 16 presses of the pedal. Ideas? I don't want to waste a lot of time chasing this down if it is obvious to others I blew something in the board.
Kevin -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
