Does this IOIO have the same firmware as the rest of them? On Mar 27, 2015 7:39 AM, "Kevin Krumwiede" <[email protected]> wrote:
> The same software works fine with other IOIO boards. This is a consistent > behavior. > > There are no errors in the console. > > I haven't tried with one of the other programs. I'll try. > > Logic and LEDs are powered via USB from a Windows 8.1 PC. > > K > > > > On Mar 27, 2015, at 12:38 AM, Ytai Ben-Tsvi <[email protected]> wrote: > > The 16-press thing makes it more likely a software but than anything else. > Is this happening consistently only with this board and never with another? > Is this a PC-based setup? How is the IOIO powered? How do the precompiled > examples behave? > On Mar 25, 2015 2:26 AM, "'Kevin Krumwiede' via ioio-users" < > [email protected]> wrote: > >> I have a strange (or maybe not so strange) problem showing up with a >> tried and true setup. I have a IOIO app that works great with several >> other IOIO boards and is well tested for a while. The hardware/circuit >> setup is also well tested, although this is a new build. I shorted the 5v >> to ground on the IOIO while building out this setup (I know! Dumb mistake) >> enough to disable the USB port on my laptop requiring a reboot... Once I >> hooked back up and re-ran the app, everything seemed to be working fine >> with the app and the hardware, but after precisely 16 presses of a switch >> connected to the board, the setup stops working and seems to freeze LEDs >> and does not accept new button press inputs. I don't see any errors in the >> console so the app seems to be just waiting for the next hardware input >> that never comes. Did I mess up the IOIO? Is there something I should/can >> do to check its health? Seems odd that it is consistently 16 presses of >> the pedal. Ideas? >> I don't want to waste a lot of time chasing this down if it is obvious to >> others I blew something in the board. >> >> Kevin >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
