I didn't think so either... but I can't see anything wired differently than my other setups and the software/firmware is consistent.
I should mention that I have the IOIO connected to the Adafruit 16 Channel PWM servo controller you and I worked on as usual. I don't have servos attached and I do not have it powered but the software shifts in the servo channel and positions from the software. 16 seems like it could be related to shifting in a certain number of bytes before something happens. I'll keep digging to see if I can narrow this down to something that gives us a better lead. Thanks Ytai. I'll let you know. Kevin On Fri, Mar 27, 2015 at 9:24 AM, Ytai Ben-Tsvi <[email protected]> wrote: > Can you upgrade to the latest before we start digging to deep? What you're > describing doesn't sound like a hardware issue. > On Mar 27, 2015 9:18 AM, "Kevin Krumwiede" <[email protected]> wrote: > >> Yes, all of my IOIO's have app-ioio0400. >> >> On Fri, Mar 27, 2015 at 8:04 AM, Ytai Ben-Tsvi <[email protected]> wrote: >> >>> Does this IOIO have the same firmware as the rest of them? >>> On Mar 27, 2015 7:39 AM, "Kevin Krumwiede" <[email protected]> wrote: >>> >>>> The same software works fine with other IOIO boards. This is a >>>> consistent behavior. >>>> >>>> There are no errors in the console. >>>> >>>> I haven't tried with one of the other programs. I'll try. >>>> >>>> Logic and LEDs are powered via USB from a Windows 8.1 PC. >>>> >>>> K >>>> >>>> >>>> >>>> On Mar 27, 2015, at 12:38 AM, Ytai Ben-Tsvi <[email protected]> wrote: >>>> >>>> The 16-press thing makes it more likely a software but than anything >>>> else. Is this happening consistently only with this board and never with >>>> another? >>>> Is this a PC-based setup? How is the IOIO powered? How do the >>>> precompiled examples behave? >>>> On Mar 25, 2015 2:26 AM, "'Kevin Krumwiede' via ioio-users" < >>>> [email protected]> wrote: >>>> >>>>> I have a strange (or maybe not so strange) problem showing up with a >>>>> tried and true setup. I have a IOIO app that works great with several >>>>> other IOIO boards and is well tested for a while. The hardware/circuit >>>>> setup is also well tested, although this is a new build. I shorted the 5v >>>>> to ground on the IOIO while building out this setup (I know! Dumb >>>>> mistake) >>>>> enough to disable the USB port on my laptop requiring a reboot... Once I >>>>> hooked back up and re-ran the app, everything seemed to be working fine >>>>> with the app and the hardware, but after precisely 16 presses of a switch >>>>> connected to the board, the setup stops working and seems to freeze LEDs >>>>> and does not accept new button press inputs. I don't see any errors in >>>>> the >>>>> console so the app seems to be just waiting for the next hardware input >>>>> that never comes. Did I mess up the IOIO? Is there something I >>>>> should/can >>>>> do to check its health? Seems odd that it is consistently 16 presses of >>>>> the pedal. Ideas? >>>>> I don't want to waste a lot of time chasing this down if it is obvious >>>>> to others I blew something in the board. >>>>> >>>>> Kevin >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To post to this group, send email to [email protected]. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "ioio-users" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "ioio-users" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
