Yes, all of my IOIO's have app-ioio0400. On Fri, Mar 27, 2015 at 8:04 AM, Ytai Ben-Tsvi <[email protected]> wrote:
> Does this IOIO have the same firmware as the rest of them? > On Mar 27, 2015 7:39 AM, "Kevin Krumwiede" <[email protected]> wrote: > >> The same software works fine with other IOIO boards. This is a >> consistent behavior. >> >> There are no errors in the console. >> >> I haven't tried with one of the other programs. I'll try. >> >> Logic and LEDs are powered via USB from a Windows 8.1 PC. >> >> K >> >> >> >> On Mar 27, 2015, at 12:38 AM, Ytai Ben-Tsvi <[email protected]> wrote: >> >> The 16-press thing makes it more likely a software but than anything >> else. Is this happening consistently only with this board and never with >> another? >> Is this a PC-based setup? How is the IOIO powered? How do the precompiled >> examples behave? >> On Mar 25, 2015 2:26 AM, "'Kevin Krumwiede' via ioio-users" < >> [email protected]> wrote: >> >>> I have a strange (or maybe not so strange) problem showing up with a >>> tried and true setup. I have a IOIO app that works great with several >>> other IOIO boards and is well tested for a while. The hardware/circuit >>> setup is also well tested, although this is a new build. I shorted the 5v >>> to ground on the IOIO while building out this setup (I know! Dumb mistake) >>> enough to disable the USB port on my laptop requiring a reboot... Once I >>> hooked back up and re-ran the app, everything seemed to be working fine >>> with the app and the hardware, but after precisely 16 presses of a switch >>> connected to the board, the setup stops working and seems to freeze LEDs >>> and does not accept new button press inputs. I don't see any errors in the >>> console so the app seems to be just waiting for the next hardware input >>> that never comes. Did I mess up the IOIO? Is there something I should/can >>> do to check its health? Seems odd that it is consistently 16 presses of >>> the pedal. Ideas? >>> I don't want to waste a lot of time chasing this down if it is obvious >>> to others I blew something in the board. >>> >>> Kevin >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "ioio-users" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
