The same software works fine with other IOIO boards. This is a consistent behavior.
There are no errors in the console. I haven't tried with one of the other programs. I'll try. Logic and LEDs are powered via USB from a Windows 8.1 PC. K > On Mar 27, 2015, at 12:38 AM, Ytai Ben-Tsvi <[email protected]> wrote: > > The 16-press thing makes it more likely a software but than anything else. Is > this happening consistently only with this board and never with another? > Is this a PC-based setup? How is the IOIO powered? How do the precompiled > examples behave? > >> On Mar 25, 2015 2:26 AM, "'Kevin Krumwiede' via ioio-users" >> <[email protected]> wrote: >> I have a strange (or maybe not so strange) problem showing up with a tried >> and true setup. I have a IOIO app that works great with several other IOIO >> boards and is well tested for a while. The hardware/circuit setup is also >> well tested, although this is a new build. I shorted the 5v to ground on >> the IOIO while building out this setup (I know! Dumb mistake) enough to >> disable the USB port on my laptop requiring a reboot... Once I hooked back >> up and re-ran the app, everything seemed to be working fine with the app and >> the hardware, but after precisely 16 presses of a switch connected to the >> board, the setup stops working and seems to freeze LEDs and does not accept >> new button press inputs. I don't see any errors in the console so the app >> seems to be just waiting for the next hardware input that never comes. Did >> I mess up the IOIO? Is there something I should/can do to check its health? >> Seems odd that it is consistently 16 presses of the pedal. Ideas? >> I don't want to waste a lot of time chasing this down if it is obvious to >> others I blew something in the board. >> >> Kevin >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To post to this group, send email to [email protected]. >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the Google > Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/c8tkOC9Ra1I/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
