Hello, i tried it in another way, but it's still failed, i wonder if
you have time to help me, my operations are list as below:
1. i unpluged the power for 10 seconds, reset the BMC.
2. set the Network traffic: 172.30.1.118
set the IPMI traffic: 172.30.2.118
On the management system `ifconfig eth0:1 172.30.2.1`
then, `ifconfig -a`, the output is as below:
mcptest8:~ # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:EC
inet addr:172.30.1.118 Bcast:172.30.1.255 Mask:255.255.255.0
inet6 addr: 2002:9b5:8c0d:2:214:5eff:fe7e:1aec/64 Scope:Global
inet6 addr: fe80::214:5eff:fe7e:1aec/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:167 errors:0 dropped:0 overruns:0 frame:1
TX packets:106 errors:0 dropped:0 overruns:0 carrier:0
collisions:135 txqueuelen:1000
RX bytes:19814 (19.3 Kb) TX bytes:15031 (14.6 Kb)
Interrupt:169
eth0:1 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:EC
inet addr:172.30.2.1 Bcast:172.30.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:169
eth1 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:ED
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:169
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
3. mcptest8:~ # ipmitool bmc reset cold
Sent cold reset command to MC
4. mcptest8:~ # ipmitool -I open lan print 1
Set in Progress : Set Complete
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback : MD2 MD5 PASSWORD
: User : MD2 MD5 PASSWORD
: Operator : MD2 MD5 PASSWORD
: Admin : MD2 MD5 PASSWORD
: OEM :
IP Address Source : Static Address
IP Address : 172.30.2.118
Subnet Mask : 255.255.255.0
MAC Address : 00:14:5e:7e:b8:20
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
Default Gateway IP : 172.30.1.1
Default Gateway MAC : 00:09:6b:89:be:b1
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
Cipher Suite Priv Max : Not Available
i have three network cards on the machine: eth0 eth1 and an "SYSTEM MEMT", then,
5. mcptest8:~ # ipmitool -I open lan set 1 password password
Password set for user 1
6. mcptest8:~ # ipmitool -I lan -H 172.30.2.118 -P password chassis power status
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Unable to get Chassis Power Status
do you know the reason, waiting for your help anxiously ....
And the related informations are listed as below:
Hardware environment:
x336
Software environment:
1. mcp5_x86_64-mcp-2006-09-11-230002-exportroot.tgz (bzImage-2.6.16.21-38-smp)
2. OpenIPMI-1.4.26-8
3. ipmitool-1.8.8.tar.gz
4. default gateway ipaddr: 172.30.1.1 macaddr: 00:09:6b:89:be:b1
5. mcptest8:/opt/fiv/ltp/testcases/fivextra/openipmi # lsmod
Module Size Used by
ipmi_si 52840 0
ipmi_devintf 26896 0
ipmi_msghandler 47092 2 ipmi_si,ipmi_devintf
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
