hello, i did all the setting again, the results is the same :-(
when strace "ipmitool -I lan -H 172.30.2.118 -P password chassis power status"
i found it conneted and sent out a message sucessfully, but failed to receive messages ???
these below are my steps to do this:
1. power off, waited 10 seconds for it's reset.
2. mcptest8:~ # ipmitool -I open lan print 1
Set in Progress : Set Complete
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback : MD2 MD5 PASSWORD
: User : MD2 MD5 PASSWORD
: Operator : MD2 MD5 PASSWORD
: Admin : MD2 MD5 PASSWORD
: OEM :
IP Address Source : Static Address
IP Address : 172.30.2.118
Subnet Mask : 255.255.0.0
MAC Address : 00:14:5e:7e:b8:20
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
Default Gateway IP : 172.30.1.1
Default Gateway MAC : 00:09:6b:89:be:b1
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
Cipher Suite Priv Max : Not Available
3. mcptest8:~ # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:EC
inet addr:172.30.1.118 Bcast:172.30.1.255 Mask:255.255.255.0
inet6 addr: 2002:9b5:8c0d:2:214:5eff:fe7e:1aec/64 Scope:Global
inet6 addr: fe80::214:5eff:fe7e:1aec/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:332 errors:0 dropped:0 overruns:0 frame:2
TX packets:188 errors:0 dropped:0 overruns:0 carrier:0
collisions:480 txqueuelen:1000
RX bytes:36124 (35.2 Kb) TX bytes:31341 (30.6 Kb)
Interrupt:169
eth1 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:ED
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:169
4. mcptest8:~ # ifconfig eth0:1 172.30.2.1
mcptest8:~ # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:EC
inet addr:172.30.1.118 Bcast:172.30.1.255 Mask:255.255.255.0
inet6 addr: 2002:9b5:8c0d:2:214:5eff:fe7e:1aec/64 Scope:Global
inet6 addr: fe80::214:5eff:fe7e:1aec/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:441 errors:0 dropped:0 overruns:0 frame:2
TX packets:237 errors:0 dropped:0 overruns:0 carrier:0
collisions:588 txqueuelen:1000
RX bytes:46012 (44.9 Kb) TX bytes:39311 (38.3 Kb)
Interrupt:169
eth0:1 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:EC
inet addr:172.30.2.1 Bcast:172.30.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Interrupt:169
eth1 Link encap:Ethernet HWaddr 00:14:5E:7E:1A:ED
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:169
5. mcptest8:~ # arp
Address HWtype HWaddress Flags Mask Iface
gateway.mcp.cn.ibm.com ether 00:09:6B:89:BE:B1 C eth0
172.30.2.118 ether 00:14:5E:7E:B8:20 CM eth0
6. mcptest8:~ # ipmitool -I open lan set 1 access on
7. mcptest8:~ # ipmitool -I open lan set 1 user
8. mcptest8:~ # ipmitool -I open lan set 1 password password
Password set for user 1
9. mcptest8:~ # ipmitool -I lan -H 172.30.2.118 -P password chassis power status
10. mcptest8:~ # nmap 172.30.2.118
Starting Nmap 4.00 ( http://www.insecure.org/nmap/ ) at 2006-09-15 07:55 UTC
Note: Host seems down. If it is really up, but blocking our ping probes, try -P0
Nmap finished: 1 IP address (0 hosts up) scanned in 0.290 seconds
11. the outputs of "ipmitool -I lan -H 172.30.2.118 -P password chassis power status" are:
Error: Unable to establish LAN session
ipmi_lan_send_cmd failed to open intf
Unable to get Chassis Power Status
And;
1. mcptest8:~ # ipmitool user list 1
ID Name Callin Link Auth IPMI Msg Channel Priv Limit
1 true false true ADMINISTRATOR
2 USERID true false true ADMINISTRATOR
2. mcptest8:~ # ipmitool channel info 1
Channel 0x1 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 0
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : enabled
Per-message Auth : enabled
User Level Auth : enabled
Access Mode : always available
Non-Volatile Settings
Alerting : enabled
Per-message Auth : enabled
User Level Auth : enabled
Access Mode : always available
3. mcptest8:~ # strace ipmitool -I lan -H 172.30.2.118 -P password chassis power status
execve("/bin/ipmitool", ["ipmitool", "-I", "lan", "-H", "172.30.2.118", "-P", "password", "chassis", "power", "status"], [/* 49 vars */]) = 0
[ Process PID=3308 runs in 32 bit mode. ]
brk(0) = 0x811f000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7f36000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(0x3, 0xffc4a0a8) = 0
mmap2(NULL, 34296, PROT_READ, MAP_PRIVATE, 3, 0) = 0xfffffffff7f2d000
close(3) = 0
open("/lib/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0004\0"..., 512) = 512
fstat64(0x3, 0xffc4a12c) = 0
mmap2(NULL, 147584, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7f08000
madvise(0xf7f08000, 147584, MADV_SEQUENTIAL|0x1) = 0
mmap2(0xf7f2b000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22) = 0xfffffffff7f2b000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300Y\1"..., 512) = 512
fstat64(0x3, 0xffc4a110) = 0
mmap2(NULL, 1181084, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xfffffffff7de7000
madvise(0xf7de7000, 1181084, MADV_SEQUENTIAL|0x1) = 0
mmap2(0xf7f01000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x119) = 0xfffffffff7f01000
mmap2(0xf7f05000, 9628, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7f05000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xfffffffff7de6000
set_thread_area(0xffc4a60c) = 0
mprotect(0xf7f01000, 8192, PROT_READ) = 0
munmap(0xf7f2d000, 34296) = 0
brk(0) = 0x811f000
brk(0x8140000) = 0x8140000
socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP) = 3
connect(3, {sa_family=AF_INET, sin_port=htons(623), sin_addr=inet_addr("172.30.2.118")}, 16) = 0 // connect success??
rt_sigaction(SIGALRM, {0x8075a40, [], SA_STACK|SA_NOCLDSTOP|0x49270}, NULL, 8) = 0
send(3, "\6\0\377\6\0\0\21\276\200\0\0\0", 12, 0) = 12 // send success ??
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted) // recv failed ??
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0008\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0008\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0008\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0008\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
nanosleep({1, 18430038867266058116}, {1, 18430038867266058116}) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0048\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0048\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0048\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
send(3, "\6\0\377\7\0\0\0\0\0\0\0\0\0\t \30\310\201\0048\16\004"..., 23, 0) = 23
nanosleep({429496729600000, 578552079250138664}, NULL) = 0
rt_sigprocmask(SIG_BLOCK, NULL, [], 8) = 0
alarm(2) = 0
recv(3, 0x811e141, 1024, 0) = ? ERESTARTSYS (To be restarted)
--- SIGALRM (Alarm clock) @ 0 (0) ---
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
alarm(0) = 0
nanosleep({21474836480000000, 578552225279026728}, NULL) = 0
write(2, "Error: Unable to establish LAN s"..., 40Error: Unable to establish LAN session
) = 40
close(3) = 0
write(2, "ipmi_lan_send_cmd failed to open"..., 39ipmi_lan_send_cmd failed to open intf
) = 39
write(2, "Unable to get Chassis Power Stat"..., 36Unable to get Chassis Power Status
) = 36
exit_group(1) = ?
Process 3308 detached
| "Duncan Laurie"
<[EMAIL PROTECTED]>
2006-09-15 12:19 |
|
On 9/14/06, Chen Li Hu <[EMAIL PROTECTED]> wrote:
Hello, i tried it in another way, but it's still failed, i wonder if
you have time to help me, my operations are list as below:
You can also try these lan set commands if you have not:
lan set 1 access on
to set up some default channel access settings, and
lan set 1 user
to set up some default user access settings, and if things still aren't working set the IP back to 0 and then re-set it to 172 address.
Also check on the management system for an entry in the arp cache. If nothing there you might need to set one manually or turn on arp generation on the BMC.
-duncan
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________ Ipmitool-devel mailing list Ipmitool-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
