Hi Krishnaprasad,
/dev/ipmi0 is created. do i need to load any thing else.
Hi Rahul,
Do you remember which all kernel modules you modprobe.
I compiled a openipmi for my environment(octeon processor 64 bit) and
installed it. Do I need to do anything extra now.
Thanks & regards,
Avnish Tyagi.
On Sat, Nov 21, 2009 at 5:19 PM, <krishnaprasa...@dell.com> wrote:
> Check if you have the device created in /dev/. I.e. /dev/ipmi0
>
>
>
> Have you loaded ipmi drivers? Check /proc/devices to see the major number
> of ipmi device. If the device is not created by default, create the same
> using mknod.
>
>
>
> Thanks,
>
> Krishnaprasad
>
>
>
> *From:* avnish tyagi [mailto:avnishty...@gmail.com]
> *Sent:* Saturday, November 21, 2009 6:54 PM
> *To:* ipmitool-devel@lists.sourceforge.net
> *Subject:* [Ipmitool-devel] error while running ipmi raw command on
> octeonwith wind river linux
>
>
>
> Hi,
>
> I am getting following while running IPMI command :
>
> Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No
> such fy
> Unable to send RAW command (channel=0x0 netfn=0x0 lun=0x0 cmd=0x0)
>
> Please provide your inputs so that i can avoid this error.
>
> Thanks & regards,
> Avnish Tyagi
>
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Ipmitool-devel mailing list
Ipmitool-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/ipmitool-devel
