I'm trying the 'tizen' branch, commit 4d13fc323cb9 (January 8). No changes
from my side. I built it with the default settings and just want to start
it.
To create the image, I followed the wiki. I made 2 partitions (one with
tizen-ivi-core and one with tizen-ivi-Modello) and installed grub as
explained. In my grub.cfg, I created two entries : one for each image. Both
boot, but result in a black screen.
With the Modello image, I managed to get a shell and an SSH connection. I
could see that weston is running ; its log seems OK, although it mentions
both LVDS1 and VGA1. As I'm using a VGA display, I tried adding
"video=LVDS-1:d" to the kernel command line to disable it, but got no
improvement. I will try "video=LVDS-A-1:d".
Best regards,
Olivier Delbeke Senior Software Engineer
[email protected] / T. +32 2 389 25 53 AWTC Europe S.A. -
Avenue de l’Industrie, 19 - 1420
Braine-l’Alleud - Belgium - www.aweurope.eu - www.aisin-aw.co.jp
VAT : BE 0474.474.114 - RPM Nivelles
Patrick Ohly
<patrick.ohly@int
el.com> To
Olivier Delbeke
01/30/2015 09:17 <[email protected]>
AM cc
"VanCutsem, Geoffroy"
<[email protected]>,
"[email protected]"
<[email protected]>
Subject
tizen-distro: booting (was: Re:
[IVI] tizen-distro : memory
allocation error
whenlinkingcrosswalk)
On Fri, 2015-01-30 at 08:54 +0100, Olivier Delbeke wrote:
> Here are my latest results :
> * My own laptop : kernel boots, systemd boots, but I don't get any
> graphics ; just audit/smack logs. I don't have a shell and cannot read
> the log.
> * VMWare : kernel boots, systemd boots but display becomes black. I
> guess that weston is running but I cannot confirm as I don't have a
> shell. SSH seems to be running, but none of the username/passwords I
> tried works (including root/tizen). No shell, no logs, stuck.
> * VTC7110 : same result as on the VMWare : boot messages look
> relatively ok, but the screen becomes black. No shell (not even on
> Ctrl-Alt-F1).
>
> Next step : try to replace the weston systemd target by a shell ;
> then, I should be able to see some logs and to see what happens when I
> manually execute weston.
I am currently trying out the "sandbox/pohly/tizen-next" branch,
unfortunately with similar lack of success. Which revision of
tizen-distro are you using?
How do you create images?
I tried both the mkefidisk.sh approach and the manual procedure
described in the Wiki.
With mkefidisk.sh I have the problem that grub gets invoked ("Welcome to
grub!" is printed), but then it gets stuck (no prompt, no further
output). I tried that for VTC1010 and MinnowMAX.
The Wiki procedure worked better. It results in a more complete grub
installation and configuration, which gets Linux and systemd running,
but also without Weston and no login method.
Regarding login, typically Yocto -dev images have an empty password for
root.
--
Best Regards, Patrick Ohly
The content of this message is my personal opinion only and although
I am an employee of Intel, the statements I make here in no way
represent Intel's position on the issue, nor am I authorized to speak
on behalf of Intel on this matter.
This mail, and any attachments thereto, is intended only for use by the
addressee(s) named herein and may contain legally privileged and/or
confidential information. If you are not the intended recipient, please note
that any review, dissemination, disclosure, alteration, printing, copying or
transmission of this mail and/or any file transmitted with it, is strictly
prohibited and may be unlawful. If you have received this mail by mistake,
please immediately notify the sender as well as our mail administrator at
[email protected], and permanently destroy the original as well as any
copy thereof. _______________________________________________
IVI mailing list
[email protected]
https://lists.tizen.org/listinfo/ivi
